• Food Science of Animal Resources
• /
• v.37 no.3
• /
• pp.418-428
• /
• 2017

In this study, the effects of pre-converted nitrite from Swiss chard powder (PS) on the color stability and shelf-life of cooked pork patties during refrigerated storage for 28 d were investigated. Nitrite was added at a concentration of approximately 120 ppm. Five treatments were formulated as follows: Control (120 ppm nitrite), T1 (2% PS), T2 (2% pre-converted nitrite from celery powder; PC), T3 (1% PS + 60 ppm nitrite), and NC (nitrite-free). The T1 and T3 samples had higher nitrosoheme pigment contents, which were associated with the redness of the samples (p<0.05). T1 resulted in the highest redness value (p<0.05). The redness and yellowness of the cooked pork patties increased with increasing PS levels. The pH of the samples subjected to all treatments decreased with progress of the storage period (p<0.05). The pH of the T1 and T3 samples treated with PS was lower (p<0.05) than that obtained with other treatments, as PS has a lower pH value. The treatments in which PS was added were most effective for reducing the level of thiobarbituric acid reactive substances (TBARS) and the residual nitrite content relative to the control. T1 resulted in the highest flavor, off-flavor, and overall acceptability scores during storage (p<0.05). The total viable bacterial count for all treatments was below 1 Log CFU/g, and E. coli and coliform bacteria were not detected during storage. Therefore, these results suggested that pre-converted nitrite from Swiss chard powder is a potential replacement for nitrite in meat products.

• Food Science of Animal Resources
• /
• v.43 no.2
• /
• pp.232-244
• /
• 2023

We investigated the effects of different phosphate replacements on the quality of ground pork products cured with sodium nitrite or radish powder to determine their potential for achieving clean-label pork products. The experimental design was a 2×5 factorial design. For this purpose, the ground meat mixture was assigned into two groups, depending on nitrite source. Each group was mixed with 0.01% sodium nitrite or 0.4% radish powder together with 0.04% starter culture, and then processed depending on phosphate replacement [with or without 0.5% sodium tripolyphosphate; STPP (+), STPP (-), 0.5% oyster shell calcium (OSC), 0.5% citrus fiber (CF), or 0.5% dried plum powder (DPP)]. All samples were cooked, cooled, and stored until analysis within two days. The nitrite source had no effect on all dependent variables of ground pork products. However, in phosphate replacement treatments, the STPP (+) and OSC treatments had a higher cooking yield than the STPP (-), CF, or DPP treatments. OSC treatment was more effective for lowering total fluid separation compared to STPP (-), CF, or DPP treatments, but had a higher percentage than STPP (+). The STPP (+) treatment did not differ from the OSC or CF treatments for CIE L^* and CIE a^*. Moreover, no differences were observed in nitrosyl hemochrome content, lipid oxidation, hardness, gumminess, and chewiness between the OSC and STPP (+) treatments. In conclusion, among the phosphate replacements, OSC addition was the most suitable to provide clean-label pork products cured with radish powder as a synthetic nitrite replacer.

• Food Science of Animal Resources
• /
• v.40 no.5
• /
• pp.831-843
• /
• 2020

This study investigated the potential for using vegetable powders as a natural replacement for sodium nitrite and their effects on the physicochemical characteristics of alternatively cured pork products. We analyzed pork products subjected to four treatments: control (0.015% sodium nitrite), Chinese cabbabe powder (CCP) treatment (0.4% Chinese cabbage powder), radish powder (RP) treatment (0.4% radish powder), and spinach powder (SP) treatment (0.4% spinach powder). Among the vegetable powders prepared in this study, SP had the highest (p<0.05) nitrate content, while CCP had the lowest (p<0.05). The cooking yields from these treatments were not significantly different from each other. However, the products with vegetable powders had higher (p<0.05) pH and thiobarbituric acid reactive substances values than the control. Pork products with vegetable powders also showed lower CIE L^⁎ values and higher CIE b^⁎ values than the nitrite-added control. RP treatment had similar (p>0.05) CIE a^⁎ values to the control, while SP treatment had the lowest (p<0.05) CIE a^⁎ values. The residual nitrite content was lower (p<0.05) in the vegetable powder added pork products than in the control, although nitrosyl hemochrome and total pigment contents in the CCP and RP treatments were similar (p>0.05) to those in the control. The control, CCP, and RP treatments showed curing efficiencies greater than 80%, indicating that CCP and RP would be promising potential replacements for sodium nitrite. The results of this study suggest that RP may be a suitable natural replacement for sodium nitrite to produce alternatively cured meat products, compared to other leafy vegetable powders.

• Journal of Animal Science and Technology
• /
• v.62 no.6
• /
• pp.922-932
• /
• 2020

Previous research has indicated that radish powder could be a suitable replacement for chemical nitrite sources in alternatively cured meat products. However, the effects of radish powder level on the physicochemical properties of cured meat have not been systematically studied. In this study, we aimed to investigate the effects of varying concentrations of radish powder and incubation time on the physicochemical properties and cured meat pigments of alternatively cured meat products. We divided our experimental setup into seven groups with different radish powder concentrations and incubation times: control (0.01% sodium nitrite), treatment 1 (0.15% radish powder and 2 h incubation), treatment 2 (0.15% radish powder and 4 h incubation), treatment 3 (0.30% radish powder and 2 h incubation), treatment 4 (0.30% radish powder and 4 h incubation), treatment 5 (0.30% celery powder and 2 h incubation), and treatment 6 (0.30% celery powder and 4 h incubation). The cooking yield, CIE a* values (redness), and total pigment levels were not significantly different (p > 0.05) between any of the alternatively cured treatments and the control. However, when 0.30% radish powder or celery powder was added to the products, the CIE b* values increased significantly (p < 0.05) with incubation time. At the same vegetable concentration, the nitrite content, nitrosyl hemochrome, and curing efficiency also increased significantly (p < 0.05) as the incubation time increased from 2 to 4 h, regardless of the types of vegetable powder. Among the meat products cured with radish powder, treatment 4 showed the highest increase in residual nitrite content, nitrosyl hemochrome content, and curing efficiency, but showed decreased lipid oxidation. Our results suggest that increased concentrations of radish powder and longer incubation times would be more suitable for producing alternatively cured meat products comparable to traditionally cured products treated with synthetic nitrite.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.8
• /
• pp.1073-1077
• /
• 2018

Nitrite plays a major role in inhibiting the growth of foodborne pathogens, including Clostridium botulinum (C. botulinum) that causes botulism, a life-threatening disease. Nitrite serves as a color-fixing agent in processed meat products. However, N-nitroso compounds can be produced from nitrite, which are considered as carcinogens. Thus, consumers desire processed meat products that contain lower concentrations (below conventional concentrations of products) of nitrite or no nitrite at all, although the portion of nitrite intake by processed meat consumption in total nitrite intake is very low. However, lower nitrite levels might expose consumers to risk of botulism poisoning due to C. botulinum or illness caused by other foodborne pathogens. Hence, lower nitrite concentrations in combination with other factors such as low pH, high sodium chloride level, and others have been recommended to decrease the risk of food poisoning. In addition, natural compounds that can inhibit bacterial growth and function as color-fixing agents have been developed to replace nitrite in processed meat products. However, their antibotulinal effects have not been fully clarified. Therefore, to have processed meat products with lower nitrite concentrations, low pH, high sodium chloride concentration, and others should also be applied together. Before using natural compounds as replacement of nitrite, their antibotulinal activities should be examined.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2010.05a
• /
• pp.73-76
• /
• 2010

This study deals with the properties of polymer-modified mortars with a nitrite-type hydrocalumite, which are effectively used as intelligent patch materials for deteriorated reinforced concrete structures. The calumite is a material that can adsorb the chloride ions (Cl-) causing the corrosion of reinforcing bars and liberate the nitrite ions (NO2-) inhibiting the corrosion in reinforced concrete, and can provide a self-corrosion inhibition function to the reinforced concrete. Polymer-modified mortars using hydrocalumite and terpolymer powders are prepared with various calumite contents and polymer-binder ratios, and tested for corrosion inhibition. Subsequently, regardless of the polymer-binder ratio, the replacement of ordinary portland cement with the calumite has a marked effect on the corrosion-inhibiting property of the polymer-modified mortars.

• Food Science of Animal Resources
• /
• v.43 no.3
• /
• pp.502-511
• /
• 2023

The use of nitrite as a conventional curing agent is decreasing because of the negative consumer perception of synthetic compounds in foods. Therefore, this study was conducted to investigate the efficacy of dongchimi as an alternative to synthetic nitrite and its effect on the qualitative properties of emulsion-type sausages. Under all tested fermentation conditions, both nitrite and nitrate contents were the highest when dongchimi was fermented at 0℃ for 1 wk. The fermented dongchimi was powdered and added to the sausages. Emulsion-type sausages were prepared with 0.25% (treatment 1), 0.35% (treatment 2), 0.45% (treatment 3), or 0.55% (treatment 4) dongchimi powder, with 0.01% sodium nitrite-treated (control 1) and 0.40% celery powder-treated (control 2) sausages as controls. There were not different (p>0.05) in the pH, cooking yield, CIE L^*, and CIE a^* between the control 1 and treatments 2, 3, and 4. CIE b^* was significantly higher (p<0.05) in the control 2 and lower (p<0.05) in the control 1 than that in the other groups. Treatment 4 and control 1 had similar contents of residual nitrite, nitrosyl hemochrome, and total pigment. Additionally, treatment 4 exhibited a significantly better (p<0.05) curing efficiency than the control 1. However, naturally cured sausages showed higher (p<0.05) lipid oxidation than the control 1. This study suggests that the use of more than 0.35% dongchimi powder could replace sodium nitrite or celery powder as curing agents for emulsion-type sausages.

• Food Science of Animal Resources
• /
• v.40 no.6
• /
• pp.990-1000
• /
• 2020

This study investigated the effects of Chinese cabbage powder as a natural replacement for sodium nitrite on the qualities of alternatively cured pork products. Chinese cabbages grown in Korea were collected and used for preparing hot air dried powder. Different levels of Chinese cabbage powder were added to pork products and evaluated by comparing these products to those with sodium nitrite or a commercially available celery juice powder. The experimental groups included control (100 ppm sodium nitrite added), treatment 1 (0.15% Chinese cabbage powder added), treatment 2 (0.25% Chinese cabbage powder added), treatment 3 (0.35% Chinese cabbage powder added), and treatment 4 (0.4% celery juice powder added). The cooking yields and pH values of treatments 1 to 3 were significantly lower (p<0.05) than the control. However, all of the alternatively cured products were redder (higher CIE a* values; p<0.05) than the control and this result was supported from higher nitrosyl hemochrome, total pigment, and curing efficiency. Furthermore, the inclusion of vegetable powders to these products resulted in considerably less residual nitrite content. However, Chinese cabbage powder (0.25% and 0.35%) was effective in producing alternatively cured meat products with a higher curing efficiency comparable to those of the traditionally cured control or the products with celery juice powder. Therefore, Chinese cabbage powder exhibited the efficacy for use as a natural replacer for alternatively cured meat products.

• Food Science of Animal Resources
• /
• v.40 no.6
• /
• pp.980-989
• /
• 2020

The objective of this study was to compare the effects of various salts on the physicochemical properties of pork emulsion sausages. Pork sausages were prepared using two different salts, sodium nitrite (SN) and sodium chloride (SC), and concentrated seawater (CSW). The CIE L*, CIE a*, and CIE b*, and chroma values of cooked and uncooked sausages with added CSW were significantly higher than those of the sausages with added SC (p<0.05). However, uncooked and cooked sausages with added SN and CSW had similar CIE a* values (p>0.05). The residual NO₂^- content of sausages with added CSW was significantly lower than that of sausages with added SN. Addition of CSW to sausages resulted in a higher cooking yield compared to the other treatments (p<0.05). Addition of SC resulted in significantly higher volatile basic nitrogen (VBN) and thiobarbituric acid (TBA) values compared to the other treatments. Furthermore, addition of CSW enhanced important physicochemical properties, including CIE a*, CIE b*, residual nitrite content, cooking yield, VBN, TBA, textural properties, and cross-sectional area.

• The Korean Journal of Food And Nutrition
• /
• v.31 no.6
• /
• pp.802-810
• /
• 2018

This study estimated the effect of drone pupa meal (DPM) added as replacement of sodium nitrite (SN) and vitamin C (VC) on physico-chemical quality characteristics of emulsion-type sausages. Samples were prepared either with 150 ppm SN+200 ppm VC (control); 75 ppm SN+100 ppm VC+6.015% DPM (T1); or 12.03% DPM (T2) and then stored at $4^{\circ}C$ for 30 days. The pH value decreased (p<0.05) with increase in the levels of DPM. Moisture and protein content decreased (p<0.05) but fat and ash content increased (p<0.05) with higher levels of DPM. T1 and T2 had higher (p<0.05) saturated fatty acids content and lower (p<0.05) unsaturated and polyunsaturated fatty acids content compared to the control. Lower (p<0.05) $L^*$ and $a^*$ values and higher (p<0.05) $b^*$ and $h^{\circ}$ values were exhibited in the T1 and T2 than in the control; and $C^*$ value was the lowest (p<0.05) in T2. The TBARS content was the highest (p<0.05) in T2, especially, 2 times higher (p<0.05) than in the control. T1 and T2 had harder (p<0.05) texture compared to the control. These findings suggest that the DPM has no replacement effects against SN and VC in emulsion-type sausage, but it has negative effects on color, lipid oxidation stability, and texture.