• 제목/요약/키워드: open-ended probe

검색결과 27건 처리시간 0.024초

내심이 돌출된 개방단말 동축선 프로브 (Open-Ended Coaxial Probe with Protruding Inner Conductor)

  • 정지현;조유선;김세윤
    • 한국전자파학회논문지
    • /
    • 제16권1호
    • /
    • pp.26-32
    • /
    • 2005
  • 개방단말 동축선 프로브는 넓은 주파수 대역에서 매질의 복소 유전율을 측정하는데 사용된다. 기준매질과 측정매질의 반사계수의 차이가 작은 경우에는, 기존의 동축선 프로브로 측정된 복소 유전율은 계측기의 불확정도(uncertainty)에 의해 심한 동요를 보인다. 본 논문에서는 기준매질과 측정매질의 반사계수 차이를 증가시키기 위하여 내심이 돌출된 개방단말 동축선 프로브를 제안하였다. 내심이 돌출된 개방단말 동축선 프로브의 타당성은 FDTD 수치해석과 실제 측정을 통해 확인하였다.

개방 단말 동축선 프로브의 유한한 접지판이 PCB 기판의 복소 유전율 환산에 미치는 영향 (The Effect of Finite Flange of Open-Ended Coaxial Probe on the Converted Complex Permittivity of PCB Substrate)

  • 정지현;김영식;김세윤
    • 한국전자파학회논문지
    • /
    • 제17권1호
    • /
    • pp.52-59
    • /
    • 2006
  • 개방 단말 동축선 프로브를 사용하여 측정된 PCB 기판과 같은 박막인 유전체의 반사 계수로부터 복소 유전율을 환산하기 위해 모드 해석과 영상 전원을 써서 적분 방정식을 유도하였다. 적분 방정식에 근거한 환산 모델의 정확성은 수치 계산된 반사 계수와 측정을 통해 구한 반사 계수로부터의 복소 유전율 환산으로 확인하였다. 또한 개방 단말 동축선 프로브의 유용한 최대 주파수는 접지판의 크기에 제한 받음을 알 수 있었다.

복소유전율 측정용 개방단말 동축선 프로브 제작오차의 영향에 관한 FDTD 모의계산 (FDTD Simulation on the Effect of Manufacturing Error of an Open-Ended Coaxial Probe for Measuring Complex Permittivity)

  • 신현;현승엽;김상욱;김세윤
    • 전자공학회논문지D
    • /
    • 제36D권8호
    • /
    • pp.19-26
    • /
    • 1999
  • 개방단말 동축선 프로브의 제작오차가 프로브에 접촉된 매질의 복소유전율 측정에 얼마나 강한 영향을 미치는 지를 살펴보기 위한 수치계산을 수행하였다. 몇 가지 종류의 유전체를 접촉시킨 개방단말 동축선 프로브의 반사계수는 FDTD 방법을 적용해 수치계산 하였다. 이러한 계산된 반사계수들을 새로운 가상의 전송선 모델에 적용시켜 복소유전율로 확산하였는데, 본 논문에서 사용한 방법은 기존의 방법보다 물리적으로 더 의미가 있는 방법이다. 개방단말 프로브에 약간의 제작오차가 있을 때에도 복소유전율에는 큰 오차가 발생함을 알 수 있었다.

  • PDF

개방 단말 동축선 프로브의 환산모델에 대한 안정성과 정확성 (Stability and Accuracy of the Conversion Model of Open-Ended Coaxial Probe)

  • 김의정;조유선;김세윤
    • 한국전자파학회논문지
    • /
    • 제16권1호
    • /
    • pp.33-39
    • /
    • 2005
  • 동축선 프로브법을 사용하여 매질의 광대역 복소 유전율 값을 얻는다. 신뢰할 수 있는 복소 유전율 분포를 얻기 위해서는 먼저 측정된 반사계수의 정확성과 환산 모델의 안정성이 보장되어야 한다. 본 논문에서는 서로 다른 uncertainty를 갖는 계측기를 사용하여 환산 모델의 민감도를 해석하였다. 그리고 측정된 반사계수의 정확성에 영향을 주는 여러 요인에 대해 측정을 통해 조사하였다.

FDTD 방법을 이용한 동축선로 끝단에서의 전파반사 분석 (Analysis of Wave Reflection from an Open-Ended Coaxial Probe Using the FDTD Method)

  • 박기억;손병문;오이석;구연건
    • 전자공학회논문지D
    • /
    • 제35D권10호
    • /
    • pp.7-12
    • /
    • 1998
  • 본 논문에서는 다양한 물질에 접촉해 있는 여러 형태의 동축선 끝단에서의 전파반사를 FDTD 방법으로 해석하였다. 3차원의 해석 구조를 2차원 원통 좌표계로 변환하여 매우 효율적으로 계산할 수 있었다. FDTD 계산결과를 통하여, 주파수가 높아지거나 또는 동축선로의 직경이 증가할 때 동축선 끝단에서의 반사크기가 줄어든다는 것을 알았다. 이 방법을 적용하여 다층 구조에서의 전파반사도 해석하였으며, 측정결과와 이론식을 이용하여 본 해석 방법을 검증하였다.

  • PDF

Simple Technique for Measurement of Complex Permittivity and Detection of Small Permittivity Change Using Partially Open Cavity

  • Park, Sangbok;Chung, Young-Seek;Cheon, Changyul
    • Journal of Electrical Engineering and Technology
    • /
    • 제9권1호
    • /
    • pp.268-272
    • /
    • 2014
  • This letter presents a measurement methodology of the complex permittivity of liquid using a partially open cavity in narrow band. The partially open cavity (POC) can measure dielectric small changes caused by the temperature variation of the liquid inside the cavity as well. Using the resonance frequency and unloaded quality factor of the proposed POC, the complex permittivity is evaluated. The apertures on the walls of the cavity are designed to circulate the liquid inside to outside of the POC and located at the corner area of the cavity to minimize the disturbance of field distribution at the dominant mode. The results measured by the proposed POC were compared with those by the conventional open-ended probe and Cole-Cole equation. The POC showed better performance in measuring small dielectric constant changes than the open-ended probe.

비파괴 시험을 위한 콘크리트의 전자기적 특성의 측정 (Measurement of Electromagnetic Properties of Concrete for Nondestructive Testing)

  • 임홍철;정성훈
    • 콘크리트학회논문집
    • /
    • 제12권3호
    • /
    • pp.115-123
    • /
    • 2000
  • Characterizing the electromagnetic properties of concrete is essential to the enhancement of accuracy and reliability in nondestructive testing of concrete structures using electromagnetic techniques. To establish a data base for the properties of concrete, a measurement technique has been developed and a set of data has been obtained for the frequency range of 1~6 GHz. As moisture content is one of major contributing factors to determine permittivity of dielectric material, moisture content is varied during the measurement. An application of a measurement system which consists of open-ended coaxial probe and automatic network analyzer to concrete and mortar specimens is studied. For this, calibration techniques, size of specimens, and number of measurements necessary to obtain reliable data are investigated. From the measured data, it is shown that moisture content plays an important role to determine the permittivity of specimens. As the moisture content increases. The permittivity of specimens show tendency to approach the permittivity of water.

수삼의 마이크로파 유전특성 (Dielectric Properties of Fresh Ginseng Determined by an Open-Ended Coaxial Probe Technique)

  • 홍석인;이부용;박동준;오승용
    • 한국식품과학회지
    • /
    • 제28권3호
    • /
    • pp.470-474
    • /
    • 1996
  • The dielectric properties, dielectric constant (${\varepsilon}‘$) and loss factor (${\varepsilon}’$), of skin and pulp of fresh ginseng were measured from $25^{\circ}C$ to $67^{\circ}C$ using an open-ended coaxial probe technique for 915 MHz and 2450 MHz. Pulp and skin had dielectric constant of $30{\sim}64$ and loss factor between 10 and 20, each variable having a respective frequency dependence typical of materials with high water content. Although the loss factor was nearly constant, the dielectric constant increased as moisture content increased. The dielectric constant of ginseng pulp increased as temperature increased (temperature ${\leq}56^{\circ}C$), but any significant differences were not found in skin dielectric properties. Penetration depth for fresh ginseng were about 2 cm at 91.5 MHz and 1cm at 2450 MHz.

  • PDF

Comparison of the Measured Electrical Properties of Pig Internal Organs with the Given Values for Human Organs

  • Jung, Ji-Hyun;Kim, Se-Yun
    • Journal of electromagnetic engineering and science
    • /
    • 제12권2호
    • /
    • pp.161-165
    • /
    • 2012
  • The electrical properties of pig internal organs including lung, liver, heart, kidney, blood, stomach, and small intestine are measured using an open-ended coaxial probe and an improved virtual transmission-line model. The measured complex permittivities of the pig organs are compared with the given values of the corresponding human organs. A similarity between these values is confirmed. For organs such as lung, liver, heart, and kidney that have regular texture and contents, the complex permittivities are almost identical to those of the corresponding human organs. The complex permittivities of human and pig blood are also very close in value. However, relatively large deviations are observed for the cases of stomach and small intestine because the internal contents of these organs significantly affect the measured electrical properties.

Measurements of dielectric constants of soil to develop a landslide prediction system

  • Rhim, Hong Chul
    • Smart Structures and Systems
    • /
    • 제7권4호
    • /
    • pp.319-328
    • /
    • 2011
  • In this study, the measurements of the dielectric constants of soil at 900 MHz and 1 GHz were made to relate those properties to the moisture content of the soil. This study's intention was to use the relationship between the dielectric constant and the moisture content to develop a landslide prediction system. By monitoring the change of the moisture content within the soil using ground penetrating radar (GPR) systems in the field, the possibility of a landslide is expected to be detected. To establish a database for the dielectric constants and the moisture content, the measurements of soil samples were made using both an open-ended dielectric coaxial probe and the GPR. Based on the measurement results, correlations between the GPR and reflector for each frequency at 900 MHz and 1 GHz were found for the dielectric constants and the moisture content. Finally, the mechanism of the measurement device to be implemented in the field is suggested.