• Proceedings of the Optical Society of Korea Conference
• /
• 1989.02a
• /
• pp.5-6
• /
• 1989

The overall design of the optical isolator system is prepared for the 1 TW Nd pulse laser. Two pockels cell optical switches are employed to suppress the amplified spontaneous emission and the backward reflection. The role of two Farady rotators is to protect the laser system from the light amplified after back reflection. One saturable absorber dye and one liquid crystal polarizer/isolator will also serve as optical isolator.

• Proceedings of the Optical Society of Korea Conference
• /
• 2007.02a
• /
• pp.215-216
• /
• 2007

Isolator가 삽입된 Erbium 첨가 광섬유광원을 제작하였고 그 특성을 측정하였다. Isolator 삽입 유무에 따른 광섬유광원의 전 온도구간($-32^{\sim}75^{\circ}C$)에서의 중심파장 안정도는 수 ppm으로 큰 차이를 보이지 않았고, 귀환광 변화($-22^{\sim}-20dB$)에 따른 중심파장 안정도에서는 isolator 삽입이후에 1.6ppm으로 귀환광 변화에 매우 둔감한 결과를 얻었다.

• Proceedings of the KIEE Conference
• /
• 1987.07a
• /
• pp.98-100
• /
• 1987

A granite optical table with a vibration isolator system is designed and constrvcted. The table top is made with granite and the vibration isolation system is constrvcted using a pneumatic isolator. The performance of the table is evalvated by the vibration measurement.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.112-113
• /
• 2003

광통신 시스템에는 다양한 광소자들이 삽입되어 사용된다. 특히 보다 많은 정보의 전송을 위하여 WBM 소자들이 흔히 사용되고 있다. 이와 같이 data 처리용량 및 속도 증가에 대응하기 위한 광섬유의 개발이 활발하게 연구되고 있으며 data 전송용량이 증가되면 channel 파장 대역폭이 좁아지게 되고 전송 속도가 증가되면 색분산 등 광섬유의 비선형성에 의한 영향이 크게 나타나게 된다. 또한 장거리 통신망 등에서는 온도 변화에 의해 분산 기울기 변화가 전송 제한 요인이 된다. (중략)

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.7
• /
• pp.1-14
• /
• 1996

Effects of the external optical feedback on the optical transmission characteristics were evaluated for 3 kinds of commercialized DFB-LD modules for 2.5Gbps optical communication systems. As a result, intensity noise induced by external optical feedback via generating the external cavity modes deteriorated the transmission performances of sthe DFB-LD modules as much as 1.5dB, 1.2dB, and 1.0dB for the maximum feedback ratio of -8.8dB which corresponds to the worst reflection along the fiber transmission line. Additional penalty of 0.5dB was occurrred when state of polarization of feedback light was adjusted. From the experiments evaluating the isolation ratio of the single polarization optical isolator, decrease of the polarization dependent isolation ratio as much as 10dB from that of specification and the effective isolation ratio as much as 20dB from that of specification was mjor cause of high sensitivity of DFB-LD modules to external feedback. It was suggested that polarization independent optical isolator or single polarization optical isolator with isolation ratio specification of more than 40dB is required for 2.5Gbps DFB-LD modules with complete suppression of external feedback effects.

• Korean Journal of Optics and Photonics
• /
• v.8 no.2
• /
• pp.142-148
• /
• 1997

The new type of dispersion-free optical isolator is presented and it's performance is verified by theoritical and empirical method. The dispersion-free optical isolator consists of 2 wedged birefringent materials, faraday rotator, collimating unit and focusing unit. In the test it shows that isolation is 40dB, insertion loss is 0.55dB, dispersion is 0.02ps at 1550nm

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.10
• /
• pp.2731-2737
• /
• 1996

The effect of the birefringence existing in the Faraday rotator on the isolation and transmission properties of the isolator was investigated. To maintain isolation of 50dB, both the deviation of the transmission angle between input and output polarizers and the deviation of the Faraday ratation angle are permitted to .+-.0.18.deg. for birefringenceless isolator and to .+-.0.09.deg. for birefringent isolator. This means that the isolator possessing linear birefringence of 0.5.deg. requires 505 more accurage adjustment than that of no birefringence. We also simulated the characteristics of wavelength dependence for both the virefringent isolator and the birefringencelless isolator. It is also found that formward transmission loss doesn't varing much with small birefringence.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2004.12a
• /
• pp.175-176
• /
• 2004

An integrated waveguide optical isolator by wafer direct bonding has been studied. The isolation ratio was found to be 2.9dB in our device. We found that wafer direct bonding between the InP and GGG is effective for the integration of a waveguide optical isolator.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.156-157
• /
• 2002

광 집적회로를 구현하기 위한 목적의 구성요소들로서 자기 광학적 효과를 이용한 아이솔레이터(isolator), 서큘레이터(circulator)등과 같은 소자들의 새로운 대안이 제시되고 있다. 현재 기존의 체적 아이솔레이터(bulk isolator)들이 마이크로 시스템에서 사용되고는 있으나 실용적인 해결점은 아닐 것이다. gyrotropic 도파로들의 광학적 TM 모드의 비가역적 위상변위(nonreciprocal phase shift)를 이용하는 경우 반도체 레이저를 광원으로 이용할 때 반사되어져 오는 광으로부터 레이저를 보호할 수 있는 광 아이솔레이터의 구현이 가능할 수 있다. 광통신에 사용되는 파장은 1.3$\mu$m 와 $1.5\mu$m에서 발달되어져 있다. (중략)

• Journal of Magnetics
• /
• v.10 no.2
• /
• pp.41-43
• /
• 2005

We have investigated an optical waveguide isolator with a multimode interference section by wafer direct bonding, operating at a wavelength $1.55\;{\mu}m$. In order to fabricate the device for monolithic integration, the wafer direct bonding between a magnetic garnet material as a cladding layer and a semiconductor guiding layer has been achieved. We found that wafer direct bonding between InP and GGG $(Gd_3Ga_5O_{12})$ is effective for the integration of a waveguide optical isolator. The isolation ratio was obtained to be 2.9 dB in the device.