• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.06a
• /
• pp.179-181
• /
• 1997

When grown the oxide single crystal including Li-ion, optimum oxygen condition is needed. Color and crack are caused in single crystal according too the change in the condition of the oxygen. LiTaO₃ crystals grown from off-composition of congruent melt composition under oxygen deficieny condition didn't generate any crack. LiNbO₃. LiTaO₃ crystals grown from congruent melt composition under optimum oxygen condition caused pale yellow color or colorless with no crack. Color gradually became colorless and generated cracks according to Oxygen excess.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.23 no.5
• /
• pp.856-862
• /
• 1994

In salt-preserved foods of every kinds, it was examined the growth condition of halophilic bacteria that induced a change of colour, taste, nutritive substance, a production condition of enzyme and a character of crude enzyme. Used bacteria is H. halobium a kind of extremely halophilic bacteria, and the required of optimum culture needed a quite long time of crude enzyme production is 168 hours. Optimum pH is about 7-7.5, so the traditional food of such neutrality pH as soybean paste and soy sauce particularly come into trouble because the growth can flourish in neutrality or alkaliescence, and the crude enzyme also appeared that best activation between pH 6 and pH 8. The optimum temperature is about 37$^{\circ}C$, the optimum temperature of enzyme is about 40 $^{\circ}C$ and the temperature stability is settled for 15 minutes and it is completely inactivated at 10 minutes. In the influence of each metal ion, Fe++ and Mn++ a stimulated the growth of H.halobium and the activation of enzyme, Cu++ and Zn++ were identified that made the growth and the activation of enzyme inhibit.

• KSBB Journal
• /
• v.13 no.5
• /
• pp.547-553
• /
• 1998

For the efficient production of a new exo-polysaccharide from Ganoderma lucidum ASI 7004, the optimum conditions and methods in submerged cultivation were investigated with an airlift fermenter system. The optimum aeration rate was 2.5 Wm at the initial pH 5.0 and 28$^{\circ}C$. The increase of dissolved oxygen concentration by pure oxygen supply during cultivation did not improved the exo-polysaccaride production and the mycelial growth. The maximum exo-polysaccharide production and the mycelial growth under the optimum culture condition were obtained in media of glucose 60g/L, yeast extract 6g/L, (NH4)2HPO4 1g/L and KH2PO4 0.5g/L. Under these optimum medium and culture conditions, about 7.15g/L of exo-polysaccharide and 13.9g/L of mycelial growth were producted, respectively.

• Journal of Bio-Environment Control
• /
• v.18 no.1
• /
• pp.23-28
• /
• 2009

This study was conducted to evaluate the effect of optimized environment conditions with growth stage in photoautotrophic micropropagation on the growth of potato (Solanum tuberosum L. cv. Dejima) plantlets and energy efficiency. Optimum environment conditions at each stage were decided in our previous study. For the evaluation of optimized environment control, potato plantlets were cultured under four different conditions: photoautotrophic optimum conditions of photosynthetic photon flux density (PPFD) and $CO_2$ levels with growth stage (POG), photoautotrophic constant condition with average PPFD and $CO_2$ levels (PCA), photoauototrophic constant condition with maximum PPFD and $CO_2$ levels (PCM), and photomixotrophic conventional condition with 3% sucrose (PMC) as control. As a result, environment control with growth stage (POG) significantly promoted all the growth characteristics such as the number of nodes and unfolded leaves, shoot height, shoot diameter, and fresh and dry weights of potato grown in vitro. In addition, based on dry weight consumed electricity and $CO_2$ were the lowest in POG suggesting the highest energy efficiency among the treatments. After transferring potato plantlets to greenhouse, the plantlets under POG showed vigorous growth, which was pretty similar with those under PMC. The accumulations of dry matter in POG were 4.7 times in vitro and 3.8 times in greenhouse as much as those in the conventional control (PCM). Thus, we concluded that in vitro environment control with growth stage induced vigorous growth of potato plantlets both in vitro and in greenhouse with less energy consumption.

• Microbiology and Biotechnology Letters
• /
• v.22 no.5
• /
• pp.522-530
• /
• 1994

Bacteriocin-producing lactic acid bacteria, Lactococcus sp. HY 449, was isolated from dairy products. Using response surface methodology, the various concentrations of medium compo- nents (tryptone, glucose, yeast extract, tween 80, and initial pH) were tested to find the optimum conditions for maximum bacteriocin production and growth of Lactococcus sp. HY 449. Central composite design was used to control the concentrations of medium components in the experiment. Bacteriocin production and cell growth of Lactococcus sp. HY 449 were most affected by glucose and yeast extract. Estimated optimum growth conditions of Lactococcus sp. HY 449 were as follows; tryptone 1.08%, glucose 1.129%, yeast extract 0.674%, tween 80 0.11%, and initial pH 7.19. Also estimated optimum conditions for bacteriocin production were tryptone 0.937%, glucose 1.108%, yeast extract 0.163%, tween 80 0.09%, and initial pH 6.98.

• Journal of Mushroom
• /
• v.14 no.1
• /
• pp.6-13
• /
• 2016

This study was carried out to determine the basic mycelial culture conditions for Poria cocos growth. According to colony diameter and mycelial density, suitable media for mycelial growth were Malt yeast extract, Potato dextrose agar, Yeast extract agar, and Yeast malt agar. The optimum temperature for mycelial growth was between 25 and $35^{\circ}C$, and the optimum pH value was between 4 and 7. Carbon and nitrogen sources were fructose and yeast extract. The optimum C/N ratio was about 10 to 1 with 2% glucose. Other minor components for optimal growth were thiamine-HCl and nicotinamide as vitamins, acetic and lactic acid as organic acids, and $MgSO_4{\cdot}7H_2O$ and $FeSO_4{\cdot}7H_2O$ as mineral salts.

• Fisheries and Aquatic Sciences
• /
• v.3 no.3_4
• /
• pp.217-221
• /
• 2000

In previous study, marine actinomycetes producing the antibiotics were investigated to invent new antibiotics from east coast of Korea. The optimum growth conditions of Streptomyces sp. NS 13239 were $28^{\circ}C$, pH 7.0 and $3\%$ of NaCl concentration in various media. Streptomyces sp. NS 13239 showed strong antimicrobial activity against gram-positive bacteria, specially Methicillin resistant Staphylococcus aureus (MRSA), but just weak antimicrobial activity against yeasts and mold. On the other hand, it did not show antimicrobial activity against gram-negative bacteria. The optimum conditions for producing antibiotics were almost consistent with optimum growth conditions except carbon source and nitrogen source.

• Journal of the Korean Ceramic Society
• /
• v.27 no.8
• /
• pp.1050-1054
• /
• 1990

Rutile(TiO2) single crystals were grown by FZ method. Feed rod was sintered in the longitudinal tube-shaped furnace at 135$0^{\circ}C$ and optimum growth condition was growth rate 5-8mm/hr, rotation rate 30-40rpm. When crystal was growing, atomosphere was oxidized condition, and grown single crystal was annealed at 110$0^{\circ}C$. The rutile single crystals were oriented to [001] direction and color change of single crystals were related to atmosphere, and difference of electric conductivity and resistance was due to the fact above.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.6
• /
• pp.105-110
• /
• 2002

ZnTe epilayers have been successfully grown on (100) CaAs substrate by hot wall epitaxy (HWE) with Zn reservoir. Optimum growth condition has been determined by a four-crystal rocking curve (FCRC). It was found that Zn partial pressure from h reservoir has a strong influence on the quality of grown films. Under the determined optimum growth condition, ZnTe epitaxial films with thickness of 0.72~24.8${\mu}m$ were grown for studying the effect of the thickness on crystalline quality. The FCRC results indicated that the quality of ZnTe films becomes higher rapidly with increase of thickness up to 6${\mu}{\textrm}{m}$. The best value of the FWHM of the few crystal rocking curve, 66 arcsec, was obtained on the film with $12{\mu}m$ in thickness. Until now, this result shows the best quality of ZnTe/GaAs films in reported.

• Proceedings of the Ginseng society Conference
• /
• 1987.06a
• /
• pp.89-107
• /
• 1987

For the elucidation of significance of saponin as quality criterion of ginseng ginsenoside content(GC) and ginsenoside pattern similarity(GPS) by simple correlation were investigated in relation to red ginseng quality factors, age, plant part, harvest season, mineral nutrition, soil physical characteristics, growth light and temperature, shading material, growth location, physiological disease and crop stand through survey of ginseng plantstions, field experiments, water culture and phytotron experiments. Effect of tissue culture was also reviewed. GC was negatively correlated with good quality of red ·ginseng and positively with bad quality. Age did not show any consistency with GC but GPS was less with the increase of age difference. GPS was less or not significant between taproot that is lowest in GC and epidermis highest, and significant between leaf and taproot. Harvest season marked with the lowest GC and Pattern was also different. Nutrient imbalance, the increase of hazardous soil nutrient and physical condition to growth increased GC, but GPS was little different. The higher the growth lights intensity and temperature the higher the GC but GPS was little changed. Root rust increased GC, but root scab decreased it. Sponge-like and inside cavity phenomena increased GC. Ginsenoside pattern of cultured tissues and rootlet showed great variation. These results strongly indicate that there are optimum saponin content and ginsenoside pattern and that these are accomplished under the optimum growth condition.