• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.4
• /
• pp.19-28
• /
• 1999

In order to control thermal deformation of the machine origin of machine tools a empirical model and a compensation system have been developed, Prior to empirical modeling the volumetric error considering shape errors and joint errors of slides is formulated through the homogeneous transformation matrix (HTM) and kinematic chain. Simulation results of the HTM method show that the thermal error of the machine origin is more critical than position-dependent errors. In order to make a stable and effective software error compensation system the GMDH (Group Method of Data Handling) models are constructed to estimate the thermal deformation of the machine origin by measuring deformation data and temperature data. A test bar and gap sensors are used to measure the deformation data. In order to compensate the estimated error the work origin shift method is developed by implementing a digital I/O interface board between a CNC controller and an IBM PC. The method shifts the work origin as much as the amounts which are calculated by the pre-established thermal error model. The experiment results for a vertical machining center show that the thermal deformation of the machine origin is reduced within $\pm$5$mu extrm{m}$.

• Korean Journal of Food Science and Technology
• /
• v.38 no.6
• /
• pp.835-837
• /
• 2006

The geographical origin of Tricholoma matsutake mushrooms was studied using near-infrared spectroscopy. Modified partial least-square regression analyses were used to discriminate geographical origin. Two-hundred fifty-six of 259 actual domestic Tricholoma matsutake were classified as domestic produce, Sixty of 81 actual imported mushrooms were correctly classified as imported, while the other 21 imported from North Korea were not clearly classified. The accuracy of geographical origin discrimination was 92.94% The correlation coefficient, standard error of calibration, and standard error of prediction from modified partial least-square regression analysis were 0.84, 15.10% and 18.30% respectively.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.03a
• /
• pp.148-153
• /
• 1998

In order to control thermal deformation of machine origin of machine tools due to internal and external heat sources, the real-time compensation system has been developed. First, GMDH models were constructed to estimate thermal deformation of machine origin for a vertical machining center through the measurement of deformation data and temperature data of specific points on the machine tool. Thermocouples and gap sensors are used respectively for measurement. These models are nonlinear equations with high-order polynomials and implemented in a multilayered perceptron type network structure. Secondly, work origin shift method were developed by implementing digital I/O interface board between CNC controller and IBM-PC. The work origin shift method is to shift the work origin by the compensation amounts which is calculated by pre-established GMDH model. From the experimental result, thermal deformation of machine origin was reduced to below $\pm$5${\mu}{\textrm}{m}$.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.809-810
• /
• 2011

• International Commerce and Information Review
• /
• v.18 no.2
• /
• pp.107-127
• /
• 2016

There has not been enough distribution of documentary evidence of origin at the stage of domestic transaction yet due to the exporter bias of interest in utilizing FTA and shortage of attracting their issues, etc. although about more ten years has passed since Korea-Chile FTA was running. Furthermore, in case of issued and distributed documentary evidence of origin, the accuracy was doubt, so it contains various problems like errors in the certificate of origin issued by the final exporter. Accordingly, this study was to find out the limitations of 'declaration of origin third party confirmation system' operated in order to solve problems of lacking the management ability of origin place of the domestic supplier and improve the accuracy of certificate of origin (comprehensive), and to investigate a method of improvement. To achieve this, this study was to suggest the institutional complementary plans for distribution activation and error prevention on the declaration of origin and introduction plan of loss prevention plan due to the errors in the certificate of origin that the final exporter did not intend in the domestic areas in order to support the use of FTA smoothly for our enterprises.

• Nuclear Engineering and Technology
• /
• v.55 no.10
• /
• pp.3700-3708
• /
• 2023

The stochastic origin ensembles method with resolution recovery (SOE-RR) has been proposed to reconstruct proton-induced prompt gammas (PGs), and the reconstructed PG image was used for range verification. However, due to low detection efficiency, the number of valid events is low. Such a low-count condition can degrade the accuracy of the SOE-RR method for proton range verification. In this study, we proposed two strategies to improve the reconstruction of the SOE-RR algorithm for low-count PG imaging. We also studied the number of iterations and repetitions required to achieve reliable range verification. We simulated a proton beam (10⁸ protons) irradiated on a water phantom and used a two-layer Compton camera to detect 4.44-MeV PGs. Our simulated results show that combining the SOE-RR algorithm with restricted volume (SOE-RR-RV) can reduce the error of the estimation of the Bragg peak position from 5.0 mm to 2.5 mm. We also found that the SOE-RR-RV algorithm initialized using a back-projection image could improve the convergence rate while maintaining accurate range verification. Finally, we observed that the improved SOE-RR algorithm set for 60,000 iterations and 25 repetitions could provide reliable PG images. Based on the proposed reconstruction strategies, the SOE-RR algorithm has the potential to achieve a positioning error of 2.5 mm for low-count PG imaging.

• Applied Biological Chemistry
• /
• v.41 no.3
• /
• pp.240-246
• /
• 1998

Geographical origin of the Korean, Chinese and Japanese sesame seeds were identified very high accuracy by NIR spectroscopy. The NIR instrument of filter type showed the same accuracy of the monochromator scanning type to identify the geographical origin of the sesame seeds. In case of adulteration between the Korean and Chinese sesame seeds, the ratio of addition could be determined about 10% error level. The reason of identification of geographical origin by NIR spectroscopy, it was supposed to the difference, of oil cake substance.

• Journal of Korean Society of Transportation
• /
• v.22 no.6
• /
• pp.57-66
• /
• 2004

When we estimate an origin-destination matrix from traffic counts. origin-destination matrix estimation from traffic counts according to the selected optimal traffic counting links is method for improving the results of origin-destinaation matrix estimation and for increasing economic efficiency. This paper proposed model of selecting traffic counting links using integer program technique, and selected a traffic counting links using this model, and estimated and origin-destingtion matrix from traffic counts according to the selected optimal traffic counting links. Also, we compared a result of estimating origin-destination matrix from the selected optimal traffic counting links using this model to a result of estimating origin-destination matrix from the randomly selected traffic counting links. The error analysis result was more improved a result of origin-destination matrix estimation using this model than a result of randomly selected links.

• Phonetics and Speech Sciences
• /
• v.7 no.3
• /
• pp.165-173
• /
• 2015

This study was aim to compare the phonological error patterns and PCC(Percentage of Correct Consonants) derived from the single word and spontaneous speech contexts of the speech sound disorders with unknown origin(SSD). The present study suggest that the development phonological error patterns and non-developmental error patterns of the target children, in according to speech context. The subjects were 15 children with SSD up to the age of 5 from 3 years of age. This research use 37 words of APAC(Assessment of Phonology & Articulation for Children) in the single word context and 100 eojeol in the spontaneous speech context. There was no difference of PCC between the single word and the spontaneous speech contexts. Significantly different developmental phonological error patterns between the single word and the spontaneous speech contexts were syllable deletion, word-medial onset deletion, liquid deletion, gliding, affrication, fricative other error, tensing, regressive assimilation. Significantly different non-developmental phonological error patterns were backing, addtion of phoneme, aspirating. The study showed that there was no difference of PCC between elicited single word and spontaneous conversational context. And there were some different phonological error patterns derived from the two contexts of the speech sound disorders. The more important interventions target is the error patterns of the spontaneous speech contexts for the immediate generalization and rising overall intelligibility.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1352-1357
• /
• 2004

Thermal error compensation has been developed for CNC (Computer Numerical Control) machining center with moving heat sources. The thermal error in CNC machining center has an effect on machining accuracy more than the geometric error does. Thus, temperature distributions of a spindle unit have been analyzed numerically by a Finite Differential Method and experimentally by an infrared (IR) camera in this study. A multiple variable method has been derived to estimate the thermal deformation of the machine origin stably and effectively after measuring deformation and temperature data. The experimental results for a vertical machining center have shown that the thermal errors of the machine origins were reduced more than 30% by the developed method.