• The Korean Journal of Applied Statistics
• /
• v.18 no.3
• /
• pp.617-625
• /
• 2005

We usually use orthogonal designs-orthogonal array of strength 2 as orthogonal arrays. It was shown that fractional factorial plaits represented by orthogonal arrays of strength 3 are universally optimal under the additive motels that includes the mean, all main effects and all two-factor interactions. Therefore, we need the measure for evaluating the orthogonal array of strength 3. We can extend this measure as the measure for evaluating the orthogonal array of strength t($\ge$ 2).

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.5
• /
• pp.85-95
• /
• 2021

Structure design sensitivity was evaluated using the orthogonal array experimental method for passive-type deck support frame (DSF) developed for float-over installation of the offshore plant. Moreover, approximation characteristics were also reviewed based on various meta-models. The minimum weight design of the DSF is significantly important for securing both maneuvering performance and buoyancy of a ship equipped with the DSF and guaranteeing structural design safety. The performance strength of the passive type DSF was evaluated through structure analysis based on the finite element method. The thickness of main structure members was applied to design factors, and output responses were considered structure weight and strength performances. Quantitative effects on the output responses for each design factor were evaluated using the orthogonal array experimental method and analysis of variance. The optimum design case was also identified from the orthogonal array experiment results. Various meta-models, such as Chebyshev orthogonal polynomial, Kriging, response surface method, and radial basis function-based neural network, were generated from the orthogonal array experiment results. The results of the orthogonal array experiment were validated using the meta-modeling results. It was found that the radial basis function-based neural network among the meta-models could approximate the design space of the passive type DSF with the highest accuracy.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.786-792
• /
• 2006

The design of experiment(DOE) with orthogonal arrays is adopted when the engineering design is needed in a discrete design space. In this research, a design process with orthogonal array is peformed to obtain the optimum design which satisfy the frequency target of the steering system. The optimum design is determined from the analysis of means(ANOM) and sensitivity information about design variables is evaluated by the analysis of variance(ANOVA). Interactions between design variables are investigated to achieve additivity which should be valid in using orthogonal array. It is shown that when strong interactions exist, the DOE process with orthogonal array considering interaction is introduced to find out optimum design.

• Journal of Convergence for Information Technology
• /
• v.10 no.7
• /
• pp.138-146
• /
• 2020

The paper deals with comparative study of characteristics of surrogate models and sensitivity evaluation using design of experiments in order to enhance and analysis the structure design of an automatic salt collector under various design load conditions. Orthogonal array design based on numerical analysis was used for the design of experiments. The thickness sizing variables of main structure member were considered the design factors, and the output responses were selected from the strength performances as well as the weight. The quantitative effects on responses for each design factor were evaluated from the orthogonal array experiment. Optimum design case was also identified to improve the strength performances with weight minimization. Using the orthogonal array experiment. various surrogate models such as response surface model, Kriging model, and Chebyshev orthogonal polynomial were generated. The orthogonal array experiment results were validated by the surrogate modeling results. The most suitable surrogate model was the response surface model for the exploration of design space of the automatic salt collector.

• Transactions of Materials Processing
• /
• v.7 no.2
• /
• pp.127-138
• /
• 1998

Process design of multi-step wire drawing process, conducted by means of finite element analysis and ANN(Artificial Neural Network) has been considered. The investigated problem involves the ade-quate selection of the drawing die angle and the correspondent reduction rate in the condition of desired initial and final diameter. Combinations of the process parameters which are used in finite ele-ment simulation are selected by using the orthogonal array. Also the orthogonal array. Also the orthogonal array and the results of finite element simulation which are related to the process energy are used as train data of ANN. In this study it is shown that the application of new technique using ANN and Othogonal array table to the process design of metal forming process is useful method.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.408-413
• /
• 2001

The structural optimization is carried out in the continuous design space or discrete design space. Methods for discrete variables such as genetic algorithms are extremely expensive in computational cost. In this research, an iterative optimization algorithm using orthogonal arrays is developed for design in discrete space. An orthogonal array is selected on a discrete design space and levels are selected from candidate values. Matrix experiments with the orthogonal array are conducted. New results of matrix experiments are obtained with penalty functions for constraints. A new design is determined from analysis of means(ANOM). An orthogonal array is defined around the new values and matrix experiments are conducted. The final optimum design is found from iterative process. The suggested algorithm has been applied to various problems such as truss and frame type structures. The results are compared with those from a genetic algorithm and discussed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.619-624
• /
• 2000

Design of experiments based on Taguchi's orthogonal array is utilized for exploring the design space and for building response surface models of insulator and isolator database in order to facilitate the effective solution of multi-objective optimization commonly occurred in NVH problems. Response surface models, called engineering database of design space, provide an efficient means to rapidly model the trade-off among many conflicting NVH goals in automotive. In the design of insulator and isolator in automotive interior part, it is important not only to construct effective matrices of NVH but also to build up engineering database of current products. The experimental design especially based on orthogonal array and the nonlinear optimization algorithms are successfully used together to obtain the optimal design of insulator and isolator. The $2^{nd}$ order response surface models of absorption coefficient and insertion loss are constructed by using modified Taguchi's $L_{12}2^13^7$ orthogonal array and successfully used in optimal design of insulator and isolator.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.1008-1011
• /
• 2001

The purpose of this paper is to evaluate the chip breakability during turning using the experimental equation, which is developed by an orthogonal array method. The chip breaking index(CB), non-dimensional parameter is used in the evaluation of chip breakability. The analysis of variance(ANOVA)-test has been used to check the significance of cutting parameters. And using the result of ANOVA-test, the experimental equation of chip breakability, which consists of significant cutting parameters, has been developed.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07b
• /
• pp.388-390
• /
• 2005

최근 소프트웨어 가 점 점 복잡해 짐 에 따라 다양한 상황에 대한 테스트의 중요도도 함께 증가하지만, 다양한 상황을 모두 고려하여 테스트하는 것은 많은 시간과 비용을 요구한다. 본 논문에서는 이러한 복잡한 시스템의 테스트를 위해 Orthogonal Array와 Equivalence Class 기법을 이용하여 test suite의 중복성을 낮추는 효율적인 test set을 생성하는 기법을 제안한다. 이렇게 제안된 기법을 OMA DRM(Digital Rights Management) System에 적용한 사례를 통해 기법의 우수성을 보인다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.3
• /
• pp.138-144
• /
• 2003

Recently, the weight reduction of vehicle influences its environment problems and performances. It is a trend that a lot of parts have been currently changed to an aluminum alloy from steel materials. In this study, the shape optimization using an orthogonal array is performed to determine the design of the knuckle which is a part of suspension system. With the material of the weight reduction was achieved by satisfying the constraints of a strength requirement. The orthogonal array of $L_{18}$ is introduced to find the optimum design variables that considers the shape of the knuckle. The characteristic function composed of the objective and the construct is defined to the feasibility. Comparing to the weight of the initial design with steel materials that of optimum design with aluminum alloy material is reduced by 60%.