• Journal of the Optical Society of Korea
• /
• 제10권3호
• /
• pp.112-117
• /
• 2006

We experimentally investigated the transmission characteristics of 400 Gbit/s (10 Gbit/s ${\times}$ 40 channels) WDM signals with 100 GHz channel spacing over 323 km of installed NZ_DSF. The installed fiber has optical properties of 0.28 dB/km attenuation, 4.3 ps/nm/km dispersion, $0.083ps/nm^2/km$ dispersion slope and less than $0.05ps/km^{1/2}$ PMD coefficient. In this experiment, two cases of dispersion compensation schemes, the lumped type and the distributed type, were compared. The results implied that the distributed type dispersion compensation in which dispersion compensation devices are inserted at the end of the each span showed better transmission performance than the lumped one in which dispersion compensation devices are located at the transmitter and receiver sites. From the analysis of the experimental results, we verified that different transmission performance comes from the power penalty induced by XPM in the distributed scheme is lower than the lumped scheme case.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2003년도 추계학술대회 논문집
• /
• pp.47-50
• /
• 2003

The wind flow and pollutant dispersion over a two-dimensional sinusoidal hilly obstacle with slope (the ratio of height to half width) of 0.7 have been investigated experimentally and numerically. Flow over a single sinusoidal hill model was visualized in a subsonic wind tunnel. The mean velocity profiles, turbulence statistics, and pollutant concentration distribution were measured at the Reynolds number based on the obstacle height (H=40mm) oft $2.6\times10^4$. Experimental results for flow over a flat ground were agreed with the theoretical and numerical results. When a pollutant source is located behind the hilly terrain, the pollutant dispersion appeared even in the upstream region due to recirculation flow.

• 한국군사과학기술학회지
• /
• 제27권2호
• /
• pp.230-237
• /
• 2024

Dispersion munitions are often equipped with dispersive submunitions used to scatter bombs over a wide area, and one of the types of dispersive submunitions is the Magnus rotor, commonly referred to as a self-rotating flying body. The Magnus rotor is designed to be dispered over a wide area by utilizing the principle of the Magnus effect through self-rotation, and has various trajectories depending on the initial conditions from the mother dispersion munition. In this paper, an index to evaluate the dispersion uniformity of footprint of the dispersive submunition is presented and the dispersion uniformity according to various initial release conditions is evaluated, and it is getting larger with high incidence angle and get max value at certain initial angular velocity.

• 설비공학논문집
• /
• 제17권11호
• /
• pp.1050-1059
• /
• 2005

Heat and $SF_6$ gas dispersions over a complex terrain were investigated using wind tunnel. The wind speed, temperature and concentration profiles were measured for the 1/1000 scale complicated terrain model in an Eiffel type boundary layer wind tunnel with test section of 2.5m in height and 4.5m in width. The scale model was mounted on the top of a plate which can rotate with respect to the approaching wind. Dispersion processes from a continuous emission source driven by various wind direction were investigated, including plume climbing over the steep up-slope of the mountain and down-spreading toward the lower level of the valley. Extensive dispersion experiment data (wind speeds and concentration profiles) were provided for verification and validation of dispersion models. Under the identical flow and emission conditions, the independently measured profiles of the temperature and $SF_6$ concentration showed an excellent agreement which ensured the credibility of the results.

• 한국대기환경학회지
• /
• 제13권5호
• /
• pp.383-396
• /
• 1997

Numerical prediction of the pollutant dispersion over a two-dimensional hilly terrain is presented. The dispersion model used in the present work is based on the gradient diffusion theory and the finite-volume method on a non-orthogonal boundary-fitted grid system. The numerical model is validated by comparing the results with the available experimental data for the flat-floor dispersion within a turbulent boundary-layer. The numerical error analysis is performed based on the guideline of Kasibhatla et al.(1988) for the elevated-source dispersion in the flat-floor boundary layer having a power-law velocity and linear eddy-diffusivity profile. The influences of the two-dimensional hilly terrain on the dispersion from a continuously released source are numerically investigated by changing the emission locations and heights. It is found that the distributions of ground-level concentration are strongly influenced by the source location and the emission height. Hence, the terrain amplification factor is greatly enhanced when the pollutant source is located within a flow separation region. Dispersion from a source of short duration is also simulated and the duration time of the pollutant is compared at several downstream locations on a hilly terrain. The results of the numerical prediction are applied to the evaluation of environmental impacts due to the automobile exhausts at the seashore highway with a parallel mountain range.

• 설비공학논문집
• /
• 제17권11호
• /
• pp.1060-1071
• /
• 2005

Passive gas dispersions over a 1/1000 scale terrain model at Eiffel type wind tunnel were reproduced by numerical simulation. Large eddy simulation was used to treat the sub-grid scale turbulences. The terrain features were represented by millions of point forces densely distributed over the solid surface using the virtual boundary method. The model simulations agreed very well with the experiments in a consistent fashion for all wind directions. The measured profiles of the wind speeds as well as the tracer gas concentrations were nicely simulated by the CFD model at most locations scattered over the model terrain. With scale factor adjusted and the thermal stratification effects incorporated, the CFD model was expected to provide reliable information on pollutant dispersions over the real complex terrains.

• Journal of the Korean Data and Information Science Society
• /
• 제28권3호
• /
• pp.493-504
• /
• 2017

통계청 인구총조사의 출생아 수 자료는 우리가 쉽게 접할 수 있는 가산 자료이며 국가경쟁력 제고를 위한 정부의 출산정책 결정 및 그 기대효과 분석의 기반이 되는 자료이다. 출생아 수 자료 분석에 있어서 포아송 모형 등 가산 모형이 우월하다는 선행 연구결과에 의하여 가산 모형을 통한 자료 분석방법이 활용되고 있다. 이 때 가산 모형에서 가장 많이 사용하는 포아송 모형은 균등상포라는 제한적인 가정을 토대로 하기 때문에 출생아 수 자료 분석에 이 포아송 모형을 그대로 적용한다면 정보의 손실과 편향추정을 피할 수 없게 된다. 이러한 한계를 극복하기 위해 Ghosh 와 Kim (2007)은 영 과잉과 부족으로 인한 과대산포와 과소산포를 동시에 설명할 수 있는 영 변환 모형 (zero-altered model)을 제안하였다. 본 논문에서는 Ghosh 와 Kim (2007)의 영 변환 모형을 적용하여 실제 출생아수분포에서 영 변환 모형의 산포형태모수 ${\delta}$를 도출하고 그 역할에 대하여 분석한다. 그리고 관측분포에서의 산포형태모수 ${\delta}$와 이론적분포와의 차이를 비교하기 위한 적합도 검정통계량과의 유사성을 확인한다.

• Journal of information and communication convergence engineering
• /
• 제16권2호
• /
• pp.67-71
• /
• 2018

The various techniques to compensate for the signal distortion due to the group velocity dispersion (GVD) and nonlinear Kerr effects of optical fibers in the optical links have been proposed in the literature. We propose a flexible dispersion-managed link configuration consisted of single-mode and dispersion-compensating fibers with irregular dispersion coefficients over all fiber spans, and an optical phase conjugator added midway along the optical links. By distributing the lengths of the single mode fibers, we achieve a flexible optical link. The simultaneous ascending and descending distribution of the single-mode fiber lengths before and after the optical phase conjugator, respectively, best compensates the distorted wavelength division multiplexed signals in the optical link with non-fixed coefficients. Our result is consistent with those of our previous work on fixed coefficients. Therefore, to improve the compensation at any magnitude of dispersion coefficient, we must artificially distribute the lengths of the single-mode fibers into a dispersion-managed link.

• Journal of the Optical Society of Korea
• /
• 제14권4호
• /
• pp.351-356
• /
• 2010

We investigated the combined effect of fiber chromatic dispersion and self-phase modulation (SPM) in multi-channel subcarrier multiplexed (SCM) optical transmission systems. We theoretically analyzed the transmission characteristics of the SCM signals with the effect of SPM and chromatic dispersion in a single-mode optical fiber by numerical simulations based on the nonlinear Schrodinger equation. The numerical simulation results revealed that the effect of fiber dispersion and SPM could occur independently between subcarrier channels in two-channel SCM systems for small optical modulation index (OMI) and large channel spacing. However, for large OMI, small channel spacing, and large fiber launching power, we found a performance degradation of the two-channel system compared to that of a single-channel system. These parameters are therefore important for the optimization of multi-channel SCM systems applicable to radio over fiber networks.

• 한국통신학회논문지
• /
• 제30권1A호
• /
• pp.1-9
• /
• 2005

표준 단일모드 광섬유를 전송선으로 사용하고, Raman 증폭기 없이 EDFA 증폭기만을 사용하여, 각 채널당 10 Gb/s의 파장다중화된 40개 채널신호들을 장거리 전송하는 경제적인 광 링크를 구성한 뒤, 이 링크의 전송 성능 최적화를 위해 분산 맵 구조의 차이에 따른 성능 차이를 분석하였다. 이 링크의 분산 맵은 전치분산보상, 구간분산보상 그리고 후치분산보상으로 나누어지는데 이들의 다양한 조합을 통해 15 가지의 다양한 분산 맵들을 구성한 뒤 각각의 경우를 분석하여 링크 성능을 크게 향상시키는 최적화된 분산맵 구조를 구하였다. 또한, 이 최적화된 분산 조건이, 단일모드 광섬유와 분산보상 광섬유가 가지는 파장에 따른 분산 기울기의 불일치로 인해 받게 되는 영향을 조사하였고, 이 영향이 링크의 성능에 미치는 효과가 무시될 수 있는 분산 기울기의 허용 가능한 불일치 범위를 구했다.