• The Journal of Korean Physical Therapy
• /
• v.27 no.1
• /
• pp.7-11
• /
• 2015

Purpose: This study was conducted in order to determine the effects of knee malalignment including genu varum, valgum, and recurvatum on static and dynamic postural stability. Methods: A total of 80 subjects were enrolled in this study. Subjects who showed over 3 cm in the distance between the knees were classified as the genu varum group, and subjects who showed over 3 cm in the distance between the ankles were classified as the genu valgum group. Subjects who showed over 1 cm in the distance between the patella and a table in prone position were classified as the genu recurvatum group. Static and dynamic stability were measured as overall, anterioposterior, and mediolateral balance index using a Biodex Balance System. Results: This study showed that knee alignment affected static and dynamic postural stability. In particular, there were significant differences in the mediolateral stability index among genu varum, valgum group, and the other groups, but no differences in overall and anteriolateral stability index. Significant differences in the anterioposterior stability index were observed between genu recurvatum and the other groups, however, there were no differences in overall and mediolateral stability index. Conclusion: The findings were that knee malalignment affects postural stability toward a specific direction. Treatment to improve postural stability for treatment of knee malalignment or to prevent falling or injuries is needed and postural stability toward a specific direction according to the knee alignment conditions should be considered.

• The Journal of Korean Physical Therapy
• /
• v.24 no.6
• /
• pp.419-422
• /
• 2012

Purpose: Malalignment of the lower limbs may increases the difficulty of maintaining equilibrium. The purpose of this study was to study the effects of genu varum and poor posture in the sagittal plane on postural stability. Methods: We had 27 subjects with varus and 27 normal subjects participate in this study. Subjects for whom the distance between the medial epicondyles in the knee joint was more than 3 cm were classified as varus group, and subjects for whom the distance was less than 3 cm were classified as normal group. The measurements of static and dynamic stability were used overall stability index (OSI), anterioposterior stability index (APSI), and mediolateral stability index (MLSI) using a Biodex balance system. Results: When measuring the static stability index, there were significant differences in the mediolateral stability index between the varus and control groups. When measuring the dynamic stability index, there were significant differences in the overall, anteriorposterior, and mediolateral stability index between the varus and control groups. These results demonstrated that genu varum affects mediolateral movement in static stability, and overall, anterioposterior and mediolateral movements in dynamic stability. Conclusion: As genu varum affects static and dynamic stability in young adults, it increases the risk of injuries or falls. Exercise and surgery are required for realigning the genu varum. Future studies about postural stability in young children and elderly people who have a risk of falls due to lower postural control ability, are needed, as well as in young adults.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.779-782
• /
• 1996

Repetitive control is a proposed control strategy in view of the internal model principle and achieves a high accuracy asymptotic tracking property by implementing a model that generates the periodic signals of period into the closed-loop system. Since the repetitive control system contains a periodic signal generator with positive feedback loop, which reduces the stability margin, in the overall closed-loop system, the stability of the closed-loop system should be considered as an important problem. In case that a real system has plant uncertainties which are not represented through modeling, the robust stability problem of the repetitive control system has not been considered sufficiently. In this paper, we propose the robust stability condition for the system with modeling uncertainty. The proposed robust stability condition will be obtained using the robust performance condition in the H$_{\infty}$ control. Moreover, by use of the proposed robust stability condition, we propose a procedure that designs a repetitive controller and a feedback controller simultaneously which can stabilize the overall closed-loop system robustly and which can also do the closedloop system without repetitive controller..

• Physical Therapy Korea
• /
• v.15 no.1
• /
• pp.30-37
• /
• 2008

This study was designed to examine the effects of temporary immobilization of the ankle and knee joints on standing in healthy young adults with the use of a postural control mechanism. The subjects were twenty-four college students (12 males and 12 females, aged between 20 and 28). A Biodex balance system SD 950-302 and its software were used to measure indirect balance parameters in standing. Each subject underwent postural stability tests in 4-different joint conditions: free joints, ankle immobilization only, knee immobilization only, and ankle and knee immobilization. In addition, the postural stability test was conducted once with the subject's eyes open and once with the eyes closed conditions. For data analysis of the postural stability tests, the overall stability index, antero-posterior stability index, and medio-lateral stability index were recorded. The overall stability index (p=.000) and medial-lateral index (p=.003) were significantly greater different conditions with eyes closed in postural stability. Therefore, the eyes closed condition is expected to be used as an effective postural stability training for treatment planning in patients with unstable postures. In addition, training based on the dynamic multi-segment model can improve postural stability and is available to therapeutic programs, helping people with unstable balance to reduce their risk of falling.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.9
• /
• pp.2284-2296
• /
• 1994

Force control of robotic mechanisms continues to be a challenging area. Previous implementation have seldom produced satisfactory results, and researchers in the past have experienced significant instability problems associated with their force controllers. In this study, a new stability factor in force control will be pointed out. When a manipulator is constrained to an environment(force-controlled), geometric instability due to the relationship between the manipulator configuration and the force-controlled direction is shown to be a significant factor in overall system stability. This exploratory study points out a rather intuitive, geometrically based stability factor in terms of an effective system stiffness and analyzes the phenomenon both analytically and graphically. Also, a stiffness control algorithm using the kinematic redundancy of a kinematically redundant manipulator is proposed to improve the overall stability in force control.

• Journal of Venture Innovation
• /
• v.3 no.1
• /
• pp.67-85
• /
• 2020

In this article, we investigated the overall relationship between the employment stability of senior wage earners and their quality of life. Moreover, we analyzed a mediated effect of satisfaction variables: income satisfaction, work environment satisfaction, and overall job satisfaction. For the research, we used the data from the Korean Longitudinal Study of Aging (KLoSA) and analyzed the data set of 1,318 senior wage earners. The result showed that there exists a positive relationship between job stability and job satisfaction, while the overall quality of life has a negative relation with both the job stability and job satisfaction. This study showed a contradictory result from previous studies that claim that the quality of employment such as job stability and job satisfaction has a positive relationship with the quality of life, and the result implies that the research on senior wage earners requires perspectives different from those on other age groups and social classes.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1148-1153
• /
• 2004

This paper presents the mechanism to increase lateral stability of a mobile robot using an energy stability margin theory. Previous measure of stability used in a wheeled mobile robot has been based on a static stability margin. However, the static stability margin is independent of the height of the robot and does not provide sufficient measure for the amount of stability when the terrain is not a horizontal plane. In this work, the energy stability margin theory, which is dependent on robot's height is used to develop a 2 dof mechanism to increase lateral stability. This proposed mechanism shifts the center of gravity of the robot to the point where the energy stability margin is maximized and overall stability of the robot equipped with this mechanism will be increased.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.9
• /
• pp.768-776
• /
• 2000

A robust high-speed motion controller is proposed. The proposed controller consists of the proximate time optimal servomechai는 (PTOD) for high-speed motion, disturbance observer (DOB) for robustness, friction compensator, and saturation handling element, In the proposed controller, DOB basically provides the chance to apply PTOS to non-double integrator systems by drastically reducing disturbances as well as unwanted signals due to difference between real system and the double integrator model. But, in DOB-based systems, if control input is saturated due to control input PTOS and/or DOB, overall system stability cannot be guaranteed. To solve this problem, ribust stability, when the control input is saturated. Eventually, a simple saturation handling element is inserted to maintain internal stability of overall system. Also, we explain the our two saturation handling methods, Additional Saturation Element (ASE_ and Self Adjusting Saturation (SAS), are the equivalent solutions of the saturation problem to maintain internal stability. The stability and performance of the proposed controller are verified through numerical simulations and experiments using a precision linear motor system.

• International Journal of Control, Automation, and Systems
• /
• v.3 no.4
• /
• pp.580-590
• /
• 2005

In this paper, we propose a new stability criterion and a controller design method for switched linear systems. The proposed stability criterion is applicable to each subsystem independently without the need to consider the overall system. The controller can be easily designed through geometric relations between eigenvalues of each subsystem matrix. The proposed methods provide a systematic and simple pole assignment approach for switched linear systems. Illustrative examples are given.

• Proceedings of the KIEE Conference
• /
• 2004.05a
• /
• pp.13-15
• /
• 2004

In this paper, we propose a novel stability criterion and a guideline of controller design for switched linear systems. Unlike existing criterions such as Lie algebraic method and multiple Lyapunov functions method, the proposed criterion can be applied to each individual system without considering an overall system. By applying the proposed criterion to each individual system separately, a state feedback controller can be easily designed. Stability of the overall system is proved by developing a rule to determine non-increasing Lyapunov functions recursively at each switching instant. An illustrative example is given.