• Korean Journal of Food Science and Technology
• /
• v.43 no.6
• /
• pp.711-718
• /
• 2011

Effects of heating conditions and seed roasting on the lipid oxidation and antioxidants of perilla seeds were studied. Perilla seeds, that were unroasted or roasted at $180^{\circ}C$ for 20 min, were ground and heated over steam at $100^{\circ}C/1$ atm or at $135^{\circ}C/2$ atm. Lipid oxidation was evaluated by peroxide value, conjugated dienoic acids contents, and fatty acid composition. Tocopherols and polyphenols were also determined. Lipid oxidation of perilla seeds was higher during heating at $135^{\circ}C/2$ atm than at $100^{\circ}C/1$ atm, and the oxidation rate was lower in unroasted seeds than in roasted seeds. Degradation of tocopherols and polyphenols in perilla seeds during heating was faster under high pressure and temperature, and was decreased by seed roasting. Contribution of polyphenols to the oxidative stability of perilla seeds during heating was higher than that of tocopherols, suggesting polyphenols and seed roasting as important factors in lipid oxidation of perilla seeds.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.5
• /
• pp.756-762
• /
• 2006

The objective of this study was to define the effects of various cooking and re-heating methods (pan roasting, steaming, oven grilling and micro-waving) on the cholesterol and formation of cholesterol oxidation products in beef loin during storage at $4^{\circ}C$. Raw samples showed lower total cholesterol content than cooked products sampled during storage for 6 d. The following cholesterol oxidation products (COPs) were separated by gas chromatography: $7{\beta}$-hydroxy cholesterol, $20{\alpha}$-hydroxy cholesterol, 25-hydroxy cholesterol, cholestane-$3{\beta}$, $5{\alpha}$, $6{\beta}$ triol (triol), ${\alpha}$-epoxide and 7-ketocholesterol. Total amounts of COPs/cholesterol at 0 d were 0.74, 0.63, 0.76, 1.23 and 0.83% for the raw sample, pan roasting, steaming, oven grilling and micro waving methods, respectively. After 6 d storage almost of the samples had higher content of total COPs than at 0 and 3 d; the lowest (0.55%) COPs was found in the steaming cooking and re-heating method. The highest (5.96%) of COPs was found in the pan roasting cooking and re-heating method after 6 d storage. In conclusion, the concentration of total cholesterol and cholesterol oxidation of beef loin were increased as a consequence of cooking and re-heating methods. Steaming and micro-waving methods showed the lowest of cholesterol oxidation products under refrigerated storage for 6 d. However, each cooking and re-heating method had its own distinctive cooking effects.

• Journal of Applied Biological Chemistry
• /
• v.42 no.4
• /
• pp.175-179
• /
• 1999

Grape seed oil was extracted using different preparatory treatments as follows: (1) grinding, (2) grinding and roasting, (3) grinding and wet- roasting, (4) grinding, roasting, and wet-roasting, and (5) grinding, wet-roasting, and wet-roasting. The highest antioxidant activity was obtained from the sample with the method (2). Initial states of oxidation were similar except method (1) that showed more oxidized state, being P.O.V.8. Acid values were observed in the range from 1.42 to 1.89. The lowest acid value was found as 1.42 in method (1) and those of others were somewhat higher, indicating that heating process of roasting produced some free fatty acids. From the results of sensory evaluation, the best odor and taste were obtained from the methods (2) and (3). Repetitive procedure of wet-roasting, like method 5, caused some loss of flavor components and decrease in the sensory evaluation score. Addition of grape seed oil (method 2) to soybean and perilla oil at the level of 20% retained considerable antioxidant activities as much as 4.3 and 5 times, respectively, than 100% soybean or perilla oil stored for 12 weeks. When soybean or perilla oil was mixed with 20% grape seed oils, P.O.V. decreased to half of that of unmixed oils.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.06a
• /
• pp.53-60
• /
• 1997

The roasting of pyrite with a cyclone reactor have been studied in terms of investigating the reaction behavior of pyrite. The development of a fundamental model for pyrite oxidation and lime sulfation in a vertical cyclone reactor. The model assumes a chemical control shrinking core behavior for the pyrite and a fluid film control shrinking core behavior for the lime. The oxygen and sulphur dioxide concentrations and the energy balance for the gas, pyrite and lime particles are solved. The model was solved and characterized numerically. Experiments have been performed to study the influence of reaction parameters such as reactor temperatures, pyrite particle sizes, air flow rates, feeding rates, and mixing ratio of pyrite and lime. The oxidation and sulfation products were characterized chemically and physically.

• Resources Recycling
• /
• v.12 no.6
• /
• pp.57-63
• /
• 2003

In this study, the separation of neodymium was investigated from NdFeB permanent magnet scrap. Decomposition and leach-ing process of NdFeB permanent magnet scrap by oxidation roasting and sulfuric arid leaching were examined. Neodymium could be separated from iron by double salt precipitation using sodium sulfate. The optimum conditions established for decom-position and leaching are as follows: oxidation roasting temperature is $500^{\circ}C$ for sintered scrap and $700^{\circ}C$ for bonded scrap, concentration of sulfuric acid in leaching solution is 2.0 M, leaching temperature and time is $50^{\circ}C$ and 2 hrs, and pulp density is 15%. The leaching yield of neodymium and iron was 99.4% and 95.7% respectively. The optimum condition for separation of neodymium by double-salt precipitation was 2 equivalents of sodium sulfate and $50^{\circ}C$ The yield of neodymium was above 99.9%.

• Food Science of Animal Resources
• /
• v.36 no.1
• /
• pp.23-28
• /
• 2016

This study investigates the effect of cooking, storage, and reheating conditions on the formation of cholesterol oxidation products (COPs) in pork loin. Samples of pork loin procured 24 h postmortem were initially processed and assessed for total fat and cholesterol content. The cooking methods evaluated were pan roasting, steaming, oven grilling, and microwaving. Cooked pork loin samples were stored at 4℃ and reheated after 3 and 6 d of storage using the original method of preparation or alternately, microwaving. Fat content increased significantly with cooking as a result of the loss in moisture but cholesterol content remained unchanged. Pan roasting and microwave cooking caused a significantly higher production of COPs, as with the process of reheating using microwave, pan roasting, and oven grilling methods. The major COPs found in pork loin were cholestanetriol, 20-hydroxycholesterol, and 25-hydroxycholesterol, whose concentrations varied according to the different cooking and reheating methods used. Moreover, the aerobic storage of cooked pork loin under a refrigerated condition also increased the formation of cholesterol oxides on reheating.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.2
• /
• pp.323-329
• /
• 2012

Sesame oil has superior oxidation stability and unique roasting flavor. Accordingly, this has been used for edible oil as well as a seasoning material for a long time in Korea. But sesame oil is a simple pressed oil, unrefined. During manufacturing process of roasting-expression, benzo(a)pyrene[B(a)P] formed as a strong carcinogenic substance causes a social problem. Detection of B(a)P in sesame oil was due to residual content in raw-sesame seeds and formation in roasting-expressing process. Especially, maximal forming process was roasting. Accordingly, in this study applied the traditional roasting method by roaster and microwaving method as a new type. Best roasting time by microwaving was for 5~10 min, B(a)P content in sesame oil was 0.53~0.79 ${\mu}g/kg$. These B(a)P contents showed 1/2 level than direct roasting method by roaster. As a result, B(a)P contents in sesame oil appeared the difference of more than 2 times according to roasting condition of sesame seed. For minimizing of B(a)P content in sesame oil is demanded roasting of sesame by microwaving than direct roasting by roaster.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.2
• /
• pp.293-300
• /
• 2018

Objective: This study observed the effects of cooking method and final core temperature on cooking loss, lipid oxidation, aroma volatiles, nucleotide-related compounds and aroma volatiles of Hanwoo brisket (deep pectoralis). Methods: Deep pectoralis muscles (8.65% of crude fat) were obtained from three Hanwoo steer carcasses with $1^+$ quality grade. Samples were either oven-roasted at $180^{\circ}C$ (dry heat) or cooked in boiling water (moist heat) to final core temperature of $70^{\circ}C$ (medium) or $77^{\circ}C$ (well-done). Results: Boiling method reduced more fat but retained more moisture than did the oven roasting method (p<0.001), thus no significant differences were found on cooking loss. However, samples lost more weight as final core temperature increased (p<0.01). Further, total saturated fatty acid increased (p = 0.02) while total monounsaturated fatty acid decreased (p = 0.03) as final core temperature increased. Regardless the method used for cooking, malondialdehyde (p<0.01) and free iron contents (p<0.001) were observed higher in samples cooked to $77^{\circ}C$. Oven roasting retained more inosinic acid, inosine and hypoxanthine in samples than did the boiling method (p<0.001), of which the concentration decreased as final core temperature increased except for hypoxanthine. Samples cooked to $77^{\circ}C$ using oven roasting method released more intense aroma than did the others and the aroma pattern was discriminated based on the intensity. Most of aldehydes and pyrazines were more abundant in oven-roasted samples than in boiled samples. Among identified volatiles, hexanal had the highest area unit in both boiled and oven-roasted samples, of which the abundance increased as the final core temperature increased. Conclusion: The boiling method extracted inosinic acid and rendered fat from beef brisket, whereas oven roasting intensified aroma derived from aldehydes and pyrazines and prevented the extreme loss of inosinic acid.

• The Korean Journal of Food And Nutrition
• /
• v.36 no.6
• /
• pp.479-488
• /
• 2023

In this study, quality properties of rapeseed oil by different roasting temperatures (140, 160, 180, and 200℃) were investigated. Roasted-pressed oil (RPO) showed a decrease in lightness and an increase in redness and yellowness with an increase in temperature compared to cold-pressed oil (CPO). In addition, the β-carotene and tocopherol content also increased in RPO as the roasting temperature increased. The tocopherol content increased by 18~20% in RPO at 200℃ compared to CPO. This increase in bioactive components led to improved radical scavenging activity dependent on roasting temperature, and RPO at 200℃ showed a 2.7-fold improvement compared to CPO. Finally, it was observed that higher roasting temperatures resulted in an extended oxidation induction period, increasing by up to 3.3 times. In conclusion, roasting is an effective method for enhancing the oil functionality of domestic rapeseed varieties. This study provides basic data for producing high-quality oil.

• Resources Recycling
• /
• v.31 no.2
• /
• pp.33-39
• /
• 2022

In this study, analytical thermochemical modeling factors that contribute to maintaining a specific temperature range during vanadium roasting as a pretreatment using a rotary kiln are investigated. The model-related mechanisms include thermochemical reaction rates, heat balance, and heat transfer, through which the resultant temperature can be estimated intuitively. Ultimately, by optimizing these parameters, the ideal roasting temperature in the kiln is ≈1000 ℃ (or ≈1273 K) for long-term operation. Therefore, the heat generated from hydrocarbon (natural gas) fuel combustion and ore oxidation reactions, as well as the radiant heat transferred to ores, are assessed. In addition, thermochemical methods for relieving the temperature gradient in order to maintain the optimum temperature range of the rotary kiln are suggested.