• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.345-350
• /
• 2000

Adaptive finite element analysis, which its solution error meets with the user defined allowable error, is recently used far improving reliability of finite element analysis results. This adaptive analysis is composed of two procedures; one is the error estimation of an analysis result and another is the reconstruction of finite elements. In the rp-method, an element size is controlled by relocating of nodal positions(r-method) and the order of an element shape function is determined by the hierarchical polynomial(p-method) corresponding to the element solution error. In order to show the effectiveness and accuracy of the suggested rp-method, various numerical examples were analyzed and these analysis results were examined by comparing with those obtained by the existed methods. As a result of this study, following conclusions are obtained. (1) rp-method is more accurate and effective than the r- and p-method. (2) The solution convergency of the rp-method is controlled by means of the iterative calculation numbers of the r- and p- method each other.

• Restorative Dentistry and Endodontics
• /
• v.21 no.1
• /
• pp.1-18
• /
• 1996

There are many advantages when using IIF and DNA probe methods over anaerobic culture method in that they are time-and effort-saving, more precise and more sensitive. Furthermore, in IIF and DNA probe methods, the detection is possible only with small amount of bacteria, the quantitative analysis is possible, and the cell viability is not necessary. The purpose of this study is to observe the incidence of P.endodontalis by carrying out anaerobic culture, IIF and colony lift using DNA probe method respectively, and to compare these 3 methods in terms of effectiveness and sensitivity in order to identify the most effective detection method. 30 teeth with at least one clinical symptoms, with single canal, and with pulp necrosis were sampled. For sampling bacteria, access cavity was prepared after disinfecting tooth and its surroundings. Then the paper point was inserted up to the periapical area, leave there for a while, and finally it was placed into PRAS Ringer's sol. and PBS sol. In anaerobic culture method, P.endodontalis was identified by biochemical tests after subculturing black and brown colonies which were produced after 7 days of incubation on BAP and Brucella BAP in anaerobic chamber. To identify P.endodontalis in IIF method, species-specific polyclonal rabbit-antisera of P.endodontalis(ATCC 35406) was reacted with sampled PBS sol. dispensed onto glass slide, and then P.endodontalis was examined by phase contrast microscopy after incubating with Goat anti-rabbit lgG conjugated to Fluorescein isothiocyanate. For colony lift using DNA probe method, membranes were laid over colonies on the surface of BAP and were hybridized with cloned DNA probe of P.endodontalis. The existence of P.endodontalis was then identified by the methods of chemiluminescent detection and color metric detection. Black colony was found in 11 teeth out of 30 teeth and P.endodontalis was detected in 6 teeth (20 %) by anaerobic culture method, 16 teeth (53 %) by IIF method, and 7 teeth (23 %) by DNA probe method. IIF method is significantly better in detecting P.endodontalis than DNA probe method and anaerobic culture method. There was no significant differences between DNA probe method and anaerobic culture method. There was significant correlation between the formation of black colony and the existence of P.endodontalis. The probability of detecting P.endodontalis when black colony being present is 2.89 times higher than when not being present. There was significant relationship between the foul odor of clinical symptoms and P.endodontalis. The sensitivity of existing P.endodontalis when foul odor being present was 93.75 %, while the specificity of not existing P.endodontalis when foul odor not being present was 28.57 %. These results suggested that the probes of P.endodontalis will be used to decide the method and prognosis in endodontic treatments.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.29.1-29.1
• /
• 2009

Fabrication of good quality P-type GaN remained as a challenge for many years which hindered the III-V nitrides from yielding visible light emitting devices. Firstly Amano et al succeeded in obtaining P-type GaN films using Mg doping and post Low Energy Electron Beam Irradiation (LEEBI) treatment. However only few region of the P-GaN was activated by LEEBI treatment. Later Nakamura et al succeeded in producing good quality P-GaN by thermal annealing method in which the as deposited P-GaN samples were annealed in N2 ambient at temperatures above $600^{\circ}C$. The carrier concentration of N type and P-type GaN differs by one order which have a major effect in AlGaN based deep UV-LED fabrication. So increasing the P-type GaN concentration becomes necessary. In this study we have proposed a novel method of activating P-type GaN by electrochemical potentiostatic method. Hydrogen bond in the Mg-H complexes of the P-type GaN is removed by electrochemical reaction using KOH solution as an electrolyte solution. Full structure LED sample grown by MOCVD serves as anode and platinum electrode serves as cathode. Experiments are performed by varying KOH concentration, process time and applied voltage. Secondary Ion Mass Spectroscopy (SIMS) analysis is performed to determine the hydrogen concentration in the P-GaN sample activated by annealing and electrochemical method. Results suggest that the hydrogen concentration is lesser in P-GaN sample activated by electrochemical method than conventional annealing method. The output power of the LED is also enhanced for full structure samples with electrochemical activated P-GaN. Thus we propose an efficient method for P-GaN activation by electrochemical reaction. 30% improvement in light output is obtained by electrochemical activation method.

• Journal of the Korea Convergence Society
• /
• v.12 no.12
• /
• pp.401-409
• /
• 2021

This study was conducted to investigate the effects of static recovery and dynamic recovery methods on heart rate, blood lactic acid concentration, and blood glucose during recovery after walking at the speed of 80bpm and 130+30bpm upon trekking of forest slopes in Taejo Mountain in Cheonan. 9 men in their 20s and 30s who had no abnormality in walking was subject to this experience. The result of through static recovery and dynamic recovery methods while trekking at the speed of 80bpm and 130+30bpm were analyzed by two-way repeated ANOVA. When there was a significant difference, the repeated method of contrast was applied to compare and analyze. The heart rate at 80bpm condition was significantly different depending on the method(p=.008) and time(p=.000) and there was no significant difference in blood lactic acid concentration for the recovery method(p=.401), but there was a significant difference depending on the time(p=.000). Blood glucose did not show significant difference according to the recovery method(p=.093), and there was significant difference depending on the time of static recovery method(p=.002). The heart rate in 130bpm + 30bpm condition was significantly different depending on to the method(p=.002) and time(p=.000), blood lactic acid concentration was significantly different depending on the method(p=.001) and time(p=.000), and blood glucose concentration was not significantly different between the time(p=090) and the method(p=.721).

• Journal of KIISE:Information Networking
• /
• v.36 no.2
• /
• pp.80-89
• /
• 2009

A DHT(Distributed Hash Table) based P2P is a method that compensates disadvantages of the existing unstructured P2P method. If a DHT algorithm is used, it can do fast data search and maintain search efficiency independent of the number of peers. The peers in a DHT method send messages periodically to keep the routing table updated. In a mobile environment, the peers in a DHT method should send messages more frequently to keep the routing table updated and reduce the failure of requests. However this results in increasing the overall network traffic. In this paper, we propose a method to reduce the update load of a routing table in the existing DHT by updating it in a reactive way. In the proposed reactive method, a routing table is updated only if a data request is coming whereas it is updated periodically in the existing proactive method. We perform experiments using Chord simulator(I3) made by UC Berkely. The experimental results show the performance improvement of the proposed method compared to the existing method.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.44 no.6
• /
• pp.106-114
• /
• 2002

In this study, the results of a series of consolidation test for undisturbed Ariake clay in Japan were analyzed by three methods, e-log p (e: void ratio, p: consolidation pressure), log e-log p and n-log p (n: porosity). Moreover, the characteristics of each analysis method were studied. For undisturbed Ariake clay, the log o-Log p and the n-log p relationships can be found as two groups of straight lines of different gradients, but both the elastic consolidation and plastic consolidation regions of e-log p relationship are expressed as a curve. In this paper, the porosity of consolidation yield n$\_$y/, consolidation yield stress p$\_$y/, and the gradient of the plastic consolidation region C$\_$p/ were represented by the log e-log p method, and n$\_$c/, P$\_$cn/ and C$\_$cn/ were represented by the n-log p method. The meaning and the relationships of each value were studied, and the interrelationships among compression indices i.e. C$\_$cn/, C$\_$p/ and C$\_$c/ are obtained from each analysis method as a function of initial porosity n$\_$0/.

• Journal of the Korean Society of Safety
• /
• v.10 no.4
• /
• pp.81-86
• /
• 1995

In order to apply to analysis methods of mechanism and cross tabulation methods for the influence factors by the accident types to the object of accidents which occurred in R.C and P.C methods among the accidents in construction work sites, the latent hazards in P.C method are evaluated from the data of accidents in H Company from Jan. 1, 1993 to Dec. 31, 1993. The relationship between accident types and unsafe acts, unsafe conditions are recognized and the hazards of R.C method and P.C method are compared from the data acquired by the analysis of causes for a kind of occurrence mechanism. In conclusions, the items such as causes of accidents, accidents types, occurrence time, and the characteristics, are concentrated on one side in the P.C method, which is quite different from R.C method. Therefore the control method for the accident causes is easily established with a lot of effective advantages. The frequency and severity of accidents in P.C method are so low in comparison with R.C method.

• Korean Journal of Biological Psychiatry
• /
• v.7 no.2
• /
• pp.180-185
• /
• 2000

Objective : The present study was designed to compare Global Field Power Measurement and conventional method in P300 determination. Method : The subjects were composed of patients(N=20) with schizophrenia by DSM-IV and normal controls(N=20). The auditory event related potential P300 was measured by "oddball paradigm". P300 components were determined by Global Field Power Measurement and conventional method at 5 electrodes(Fz, Cz, Pz, $T_3$, $T_4$). Results : P300 amplitudes of patients were smaller than those of controls across all electrodes and in both methods, but there was no differential power in P300 determination between two methods. Asymmetry of auditory event-related potential P300 was not shown between patients with schizophrenia and normal controls. Conclusion : It is implicated that it depends on clinical situations and research purposes what method of P300 determination will be more appropriate for patients with schizophernia.

• Structural Engineering and Mechanics
• /
• v.11 no.5
• /
• pp.535-546
• /
• 2001

A new p-adaptive analysis scheme for hp-clouds method is presented. In the scheme, refined global equations are resolved into two parts, one of them being related to the newly appended dof's. The solution obtained in previous analysis step is reflected in the force vector. The size of the p-adaptive equation consisting of the newly appended dof's is much smaller than the original equation. Consequently, the computational cost is drastically decreased. Through numerical examples, the efficiency and efficacy of the method in comparison with the existing p-refinement scheme of the hp-clouds have been demonstrated.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.2 no.1
• /
• pp.46-51
• /
• 2007

The file sharing method from P2P environments with client/server method to be different price does not use an expensive server from radio environment not to be, uses only the client computers and dispersed the joint ownership and a management of data. Human occurs from the client/server method which uses the server of large dosage with like this reason, will be able to minimize the waste of the waste of the material resources. Also valence increasing number of days rock operation of the user provides their benefit of etc. their result comes to be high. Like this is caused by with reason and the many people have an interest in P2P, also currently footlights the researches whice use P2P even in the mobile relation field which is receiving actively, is advanced.