• 펄프종이기술
• /
• 제39권4호
• /
• pp.61-67
• /
• 2007

Paper sludges collected from three different paper mills were physico-chemically analyzed in order to use them as raw materials for making bed soils and seedling pots. The sludge from a fine paper mill contained lots of inorganic pigment particles used for coating, as those from a newsprint mill and a tissue mill had not. It was clearly through XRD analysis confirmed that all sludges included calcium carbonate. The paper sludge from the tissue mill contained the greatest amount of particles, which would contribute to water absorption and nutrient storage. The sludge from the fine paper mill had the highest density due to many inorganic elements. While the ash content and the total nitrogen content were the highest in the sludge from the fine paper mill, the C/N ratio was the lowest in the fine paper mill sludge. All sludges seemed to have insufficient contents of potassium. The sludges from the newsprint mill and the tissue mill showed more silicon contents than that from the fine paper mill. It was concluded that the sludge from the fine paper mill would be able to be the most efficient raw materials for making bed soils and seedling pots and the other two sludges would be more efficient for intensive culture for crops such as rice and grain with additional supplement of nitrogen and other nutrients.

• 세라미스트
• /
• 제14권2호
• /
• pp.7-14
• /
• 2011

This paper has investigated physicochemical properties and conventional and environmental-friendly treatment methods of paper mill sludge to emphasize the importance and necessity of the sludge recycling. The paper mill sludge generally shows high contents of calcium and water, and is mostly discharged by landfill after incineration process rather than being recycled due to technical or economical problems. In recent years, however, several possible methods for recycling the paper mill sludge have been suggested for its sustainable process as follows; compost, raw material for the construction and paper industry, new energy source for reducing fossil fuel use and raw material of activated carbon for treating paper mill wastewater. Thus the authors suggest that practical recycling technologies of the paper mill sludge must be developed for substantiality in the paper industry through comprehending physicochemical compositions and generation status of the sludge and actively performing various related studies. Furthermore, this investigation could be used as preliminary information for the study on recycled paper development using paper mill sludge incineration ash.

• Journal of Microbiology and Biotechnology
• /
• 제11권3호
• /
• pp.362-368
• /
• 2001

The effects of water soluble materials in paper mill sludge on cellulase and $\beta$-glucosidase activities were studied while the optimization of enzyme system for hydrolysis of the paper mill sludge for production of glucose was made. Water soluble materials in the paper mill sludge showed stimulatory effect on carboxymethyl cellulose (CMC) activity, inhibitory effect on filter paper (FP) activity, and no effect on avicelase and $\beta$-glucosidase activities. CMC and ${\beta}$-glucosidase activities at 5 and 10, 5 or 10 and 10, and 10 and 10 U/ml were optimal for hydrolysis of 5, 10, and 20% of the paper mill sludge, respectively.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.441-444
• /
• 2006

A lot of water is using in the paper mill for dilution, washing, sealing, and other process operation. As the regulation of water environment has been more tightened than ever before, water management in the paper mill becomes the most important task. Topics on reducing fresh water and increasing recycling water have been studied. Further, an interest in zero-effluent system has been increased. The pH of waste water in paper mill is usually weak acidic or neutral. The waste water in the paper mill includes water insoluble organic materials that are not easy to be dissolved in the water, inorganic materials that never react with water and chemical additives that are used to recycled fiber. This study investigated on the effect of various materials used in paper mill on COD. This data could be used to control the environmental load in paper mill. COD caused by raw materials and NBDCOD (Non Bio Degradable COD) after the activated sludge process are investigated in this study. Results obtained in this study can be used in a simulation program designed to control environmental load in the paper mill.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제19권1호
• /
• pp.46-53
• /
• 2014

The purpose of this study is to promote utilization of paper mill sludge as an adsorbent for stabilizing heavy metals in contaminated water by measuring the adsorption capacity of paper mill sludge for cadmium and arsenic. To measure adsorption capacity of paper mill sludge, sorption isotherm experiments were analyzed by Langmuir and Freundlich isotherm models. Also, two methods of chemical modifications were applied to improve the adsorption capacities of paper-mill-sludge: the first method used sodium hydroxide (NaOH), called PMS-1, and the second method used the NaOH and tartaric acid ($C_4H_6O_6$) together, called PMS-2. For Cd adsorption, PMS-1 presented the increase of reactivity while PMS-2 presented the decline of reactivity compared to that of untreated paper-mill-sludge. In case of As adsorption, both PMS-1 and PMS-2 showed the decrease of adsorption capacities. This is because zeta-potential of paper mill sludge was changed to more negative values during chemical modification process due to the hydroxyl group in NaOH and the carboxyl group in $C_4H_6O_6$, respectively. Therefore, we may conclude that the chemical treatment process increases adsorption capacity of paper mill sludge for cation heavy metals such as Cd but not for As.

• 한국양봉학회지
• /
• 제34권4호
• /
• pp.315-323
• /
• 2019

Large amounts of sludge produced by paper mill industries represent one of the most serious environmental problems in the world. Recently, beekeepers living in the neighborhood of the paper mill in Hwasan County, Youngcheon city, GB, Korea, became alarmed that honey bee colonies were dying off suddenly across the neighborhood. A preliminary study was conducted to evaluate the toxicity (oral, fumigation, repellent) of recycled solid paper mill sludge (SPMS) and leachate paper mill sludge (LPMS) to honey bee workers under laboratory conditions, and to analyze the volatile organic compounds(VOC). The SPMS and LPMS were separately subjected to a liquid-liquid extraction (LLE) at three temperatures to extract VOC(highest VOC yields: 1.52% SPMS and 0.34% LPMS). A total of 70 chemicals were detected in the VOC of paper mill sludges, of which 49 and 21 volatile organic compounds from SPMS and LPMS, respectively. The SPMS was dominated by high degree presence of stanols (saturated sterols), such as cholestanol, cholestan-3-ol and also saturated hydrocarbons. However, LPMS was characterized by the absence of sterols. Both SPMS and LPMS showed an influence on the olfactory behavior of honey bee on Y-tube assay, with repulsion rates of 72 and 68%, respectively. Both SPMS and LPMS at concentration of 100mg/mL caused higher honey bee oral mortality than the untreated controls at 48, 72, 96 and 120 hours after treatment(highest oral mortality at 120 hr: 85.74%(SPMS); 93.51 % (LPMS)). A similar pattern was observed when honey bees were tested to fumigant toxicity. Both SPMS and LPMS caused significant higher mortality than the untreated control 24 hour after the exposure (highest fumigation mortality at 120 hr: 69.4% (SPMS); 56.8% (LPMS)). These preliminary results indicated that paper mill sludge could be partly responsible for sudden death and disappearance of honey bees, especially in hot humid summer days. With climate change, the risk of environmental chemical exposure to honey bee would pose greater attention.

• 펄프종이기술
• /
• 제46권2호
• /
• pp.30-34
• /
• 2014

To apply paper mill sludges to soil as fertilizer, paper mill sludges were investigated to predict suitability and maleficence for soil. Newspaper and Printed Paper sludge were analyzed by IC (Ion Chromatography) and ICP-OES (Induced Coupled Plasma Optical Emission Spectrometer). As a results, harmful materials in two types of sludges were below standard by notified Ministy of Environment (ME). Also ionic substances causing the water pollution in sludges were less than the standard value by notified ME. Thus sludges from newspaper and printed paper is presumed that there are no water pollution and soil contamination.

• 자원리싸이클링
• /
• 제17권4호
• /
• pp.10-20
• /
• 2008

본 연구는 아직까지 활용실적이 적은 제지슬러지소각재를 대량으로 활용할 수 있는 방법을 도출하기 위하여 제지슬러지소각재를 시멘트의 대체재로 사용하고자 하였다. 또한 제지슬러지소각재 대체 시 나타나는 단점인 수화열 및 흡수율의 증가로 인한 수축균열을 폴리프로필렌섬유 및 셀룰로오스섬유를 혼입하여 이에 대한 제어효과를 고찰하여 제지슬러지소각재의 시멘트 대체재로써의 활용가능성을 규명하였다.

• 한국CDE학회논문집
• /
• 제8권2호
• /
• pp.115-121
• /
• 2003

A new Layered Manufacturing(LM) system, named PaperMill, is developed applying micro milling technology. A micro endmill(127 11m in diameter) is introduced as the cutter of build material. The selected build material for this system is an adhesive-coated paper roll which provides advantages such as good bonding between layers, machinability, and low material cost. A 3-axis CNC controller and three step-motors are used for the movement of X-Y-Z table of the system. For simplicity of the control of mechanism, the control system for feeding the paper roll is uncoupled from CNC controller. Two code converters are developed for the toolpath generation of the new LM system. The NC converter generates a set of NC codes for PaperMill using commercial CAM software while the SML converter generates an NC code from Quickslice's SML format. The NC codes generated from the converters consist of a series of profile data and trigger code for paper feeding. Two sample gears were fabricated to prove the concept of the system, which shown that the dimensional errors of the fabricated gears is under 3.4 percent.

• 펄프종이기술
• /
• 제33권5호
• /
• pp.1-11
• /
• 2001

In the past, abundant and clean water was available for paper mills'use. However, the growth of population and industry made water less available nowadays. Also, environmental regulation limits wastewater discharge, which affects mill operation cost. Therefore, paper mills are under pressure to use more recycled water and mill system closure. As a result, chemical and physical parameters of water are changing and new environment if being created for microorganisms in paper mill system as well. The more soluble or suspended organic materials are increased as more water is recycled and less or scarce dissolved oxygen is available, depending on the degree of recycled water usage. Microorganism flora ill paper mill system will be a1so shifted according to the environmental change of mill system. Anaerobic bacteria, including sulfate reducing bacteria (SRB), will be dominant in the system as very low or almost no oxygen available in the system. Nevertheless, it is common in domestic paper mills that employ the same and old biocides as a means of microbial control, and microbiological control is often less recognized or even neglected. The right biocide selection for increased reductive environment of mills is critical for operation and estimated loss from paper quality defects such as sheet break, holes due to microbiological cause is tremendous compared to the microbiological control cost. It is imperative to investigate and diagnosis the environmental change of mills for right control of cumbersome microorganisms. Several useful diagnosis tools, including new technology employing OFM(Optical Fouling Monitor) in situ, are illustrated.