• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.871-875
• /
• 2001

Laser photolithography technique is useful for fabricating micro-patterns of silicon wafers. In this work, the laser photolithography micromachining technique is optimized based on Taguchi method. Sensitivity analysis was performed using laser scanning speed and laser power level as the parameters. The results show that for the photoresist used in this work, a laser scan speed of $70{\mu}m/s$ at 50mW laser power gives the best result.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.1
• /
• pp.79-86
• /
• 2012

This study focuses on the problem of scheduling wafer lots of several recipe(operation condition) types in the photolithography workstation in a semiconductor wafer fabrication facility, and sequence-dependent recipe set up times may be required at the photolithography machines. In addition, a lot is able to be operated at a machine when the reticle(mask) corresponding to the recipe type is set up in the photolithography machine. We suggest various heuristic algorithms, in which developed recipe selection rules and lot selection rules are used to generate reasonable schedules to minimizing the total weighted flowtime. Results of computational tests on randomly generated test problems show that the suggested algorithms outperform a scheduling method used in a real manufacturing system in terms of the total weighted flowtime of the wafer lots with ready times.

• International Journal of Precision Engineering and Manufacturing
• /
• v.9 no.1
• /
• pp.12-18
• /
• 2008

This paper describes two run-to-run controllers, a nonlinear multiple exponential-weight moving-average (NMEWMA) controller and a dynamic model-tuning minimum-variance (DMTMV) controller, for photolithography processes. The relationships between the input recipes (exposure dose and focus) and output variables (critical dimensions) were formed using an experimental design method, and the photolithography process model was built using a multiple regression analysis. Both the NMEWMA and DMTMV controllers could update the process model and obtain the optimal recipes for the next run. Quantified improvements were obtained from simulations and real photolithography processes.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.389-392
• /
• 2005

In the maskless photolithography based on the Digital Micromirror Device (DMD) by Texas Instruments Inc. (TI), the micromirror array works as a virtual photomask to write patterns directly onto Flat Panel Display (FPD) at high speed with low cost. However, it is neither simple to generate region-based patterns for the micromirror array nor easy to deliver sequences of patterns for the micromirror controller. Moreover, the quality of lithography yields the precise synchronization between generating sequence of patterns and irradiation rate off micromirrors. In this study, the region-based pattern generating system for maskless photolithography is devised. To verify salient features of devised functionalities, the prototype system is implemented and the system is evaluated with actual DMD based photolithography. The results show that proposed pattern generating method is proper and reliable. Moreover, the devised region-based pattern generating system is robust and precise enough to handle any possible user specified mandate and to achieve the quality of photolithography required by FPD manufacturer.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3319-3325
• /
• 2012

This paper describes the development of the TrackSim, which is a discrete event simulation tool for photolithography equipment of semiconductor industry. The TrackSim is focused on the accurate simulation model of the photolithography equipment and easy-to-use user interfaces. TrackSim provides 3D simulation environment for evaluating, validating, and scheduling the photolithography process. One of the major characteristics of TrackSim is in that it is developed based on Applied Materials' AutoMod, a discrete event simulation software broadly used in semiconductor industry. Accordingly, the photolithography model of TrackSim can be used to perform simulation connected with other simulation models built with AutoMod.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.10
• /
• pp.1011-1017
• /
• 2012

We report the development of an optical micro-nanolithography method by using a roll-type mask. It includes phase-shift lithography and photolithography for realizing various target dimensions. For sub-wavelength resolution, a structure is achieved using the near-field exposure of a photoresist through a cylindrical phase-mask, allowing high-throughput continuous patterning. By using a film-type metal mask, continuous photolithography was achieved, and this method could be used to control the period of resultant patterns in real time by changing the rotating speed of the cylinder mask. As an application, we present the fabrication of a transparent electrode in the form of a metallic mesh by using the developed roll-type photolithography process. As a result, a transparent conductor with good properties was achieved by using a recently built cylindrical phase-shift lithography prototype, which was designed for patterning on 100-mm2 substrates.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05c
• /
• pp.247-250
• /
• 2002

SAW filters were fabricated on $LiNbO_3$ substrates to evaluate frequency response and properties of photolithography. In the both of etch and lift-off methods, lift off method was superior to etch method in fabrication process. Frequency response property was measured by network analyzer. From measurement of acoustic property, SAW propagation velocity was 3574.9m/sec for $LiNbO_3$ SAW filter.

• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.497-500
• /
• 2004

In this paper, we developed a new photolithography process which used a water-soluble photoresist instead of organic solvent soluble photoresist, defined pentacene thin film. And pentacene OTFTs were fabricated with the water- soluble photolithography process.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.12
• /
• pp.128-135
• /
• 2007

Micro-channels for a wave micropump have been fabricated using the Stereolithography and UV Photolithography. The micro-channel with a channel height of $500\;{\mu}m$ was fabricated with stereolithography. UV photolithography was used for producing micro-channels with a channel length less than $100\;{\mu}m$. The fabrication process data including spinning rpm, pre-bake and post-bake time, and develop time for single layer and multiple layer 3D micro-structures using SU-8 photo resist are experimentally found. A film mask printed with a 40,000 dpi laser printer was used for UV lithography and micro-structures in the order of tens of micrometers in dimension were successfully fabricated.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.217-222
• /
• 2004

The aim of this paper is to investigate the effect of micro-dimple size on reduction friction and to understand the potential of friction reduction through micro-scale dimple to fabricate by photolithography on pin-on-disk test using flat-on-flat contact geometry. It was verify that the friction property with respect to the same pitch has been influence on the size of dimple under lubricated sliding contact. Also, we can recognize from Stribeck curve that the friction property has a connection with the size of dimple. It can explain a relationship between the friction coefficient and a dimensionless parameter for lubrication condition. The friction property has been an effect on the size of surface texture on reduction friction, not only because the density of dimple, but also because the ratio of diameter/pitch. This ratio of approximately 0.5 is recommend under the tested friction condition. It suggested that the ratio of d/p is an important parameter for surface texture design.