• Explosives and Blasting
• /
• v.10 no.1
• /
• pp.3-7
• /
• 1992

In the pilling works in the city, it is tend to transfered to the non-vibration pilling works. This drop-hammer pilling executed with in 2 meters distance to neighbour building structure. in the rainy season. According to imperical formula which tested in similar site, Vibration damaged area is within 14 meters radius from drop-hammer pilling site. The loratories Data of Dae Woo of Korea hausing Authority are refered to above poject.

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.520-523
• /
• 1998

Pilling 현상은 우리의 일상생활에서 볼 수 있는 흔한 일이다. 직물에 있어서 Pilling 현상은 제품의 외관과 촉감을 나쁘게 하고 제품의 수명을 저하시키는 현상 중의 하나이다. 이러한 Pilling현상의 원인은 크게 2가지 측면에서 구분되어 진다 첫째는 섬유가 정전기를 띄면서 주위의 이물질들을 끌어 들여 그러한 이물질이 pill을 형성하는 경우와 둘째는 섬유자체가 pill을 형성하기 쉬운 특성을 지니는 경우로 구분된다. (중략)

• Fibers and Polymers
• /
• v.7 no.1
• /
• pp.57-61
• /
• 2006

A study has been made on the quantification and evaluation of fabric pilling using two-dimensional and three-dimensional hybrid imaging methods. Two-dimensional imaging method was good for some samples while three-dimensional measurement method for others, according to the properties of their base fabric. Various image processing techniques as well as three-dimensional data processing algorithms were applied for the extraction of pills from measured data and a series of shape parameters have been defined for the objective evaluation of fabric pilling. An evaluation criterion that is compatible with the conventional evaluation method has been proposed by applying the new evaluation method to the current photographic standards.

• Fibers and Polymers
• /
• v.7 no.2
• /
• pp.213-216
• /
• 2006

The effect of cashmere yarn twist, knitted fabric density, and cashmere properties on pilling rates of cashmere knitted fabric is investigated in this paper. The experimental results show that yarn twist and fabric density have little influence on pilling rates of cashmere knitted fabric for yarn 38.4 tex/2 when yarn twist varies from 234 T/m to 272 T/m, and the fabric density is 9.7, 10.7, and 11.2 yarns/inch, respectively. The length of cashmere fiber, in particular less than 7.5 mm, is responsible for the pilling rates of cashmere knitted fabric based on optimal scaling regression analysis.

• Journal of KSNVE
• /
• v.9 no.5
• /
• pp.899-905
• /
• 1999

Construction equipment noise has caused much annoyance for a number of dwellers in nearby construction field and has become a very serious issure in our living environment. Therefore, in our country, a practical solution and a better method of reducing construction equipment noise are highly required in construction field. Practical solutions for the construction equipment noise, however, are very difficult because of the poorness of basic data and insufficiency of the existing research. Especially, in order to establish the sound insulation plan about pilling works noise with high sound pressure level and impactive, a real situation of sound characteristics about the noise of pilling works in foundation work demands more detail investigation. In this point, this study attempts to survey the characteristics of attenuation and propagation of construction equipment noise in pilling work using SIP(soil-cement injected precast pile) method with casing. And this study intends to get the basic data for establishment of a standard about construction noise.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.1
• /
• pp.17-27
• /
• 2017

This study evaluated the performance of bedding fabrics consisting of warp (150d/144f, polyester) and weft (polyester, Tencel and cotton MVS blended spun yarn) with blend ratio of weft. We measured electrostatic propensity, moisture properties, pilling properties and mechanical properties of the fabrics for this study. F-P fabric showed outstanding moisture properties and pilling properties. However, tensile properties and electrostatic propensity were relatively inferior to other characteristic values. Significant static electricity may make F-P fabric uncomfortable. F-P7C3 fabric showed outstanding moisture properties and pilling properties. Static electricity may make F-P7C3 fabric uncomfortable; in addition, F-P5C5 fabric showed outstanding moisture properties and pilling properties. Rough and stiff hand feel were expected to increase because tensile properties decreased and surface properties increased. F-C fabric showed outstanding pilling properties and electrostatic propensity. However, it showed inferior moisture control properties. F-P5T4C1 fabric showed outstanding moisture properties, pilling properties and electrostatic propensity. Several properties are outstanding; however, the hand feels are very rough and stiff from bending. The water evaporation and static electricity increased with increasing polyester content. As the content of cotton increased, tensile properties were improved. However, water evaporation and static electricity decreased. The addition of Tencel increased the thickness and compression energy so that it exhibited a soft characteristic upon compression and an excellent moisture control properties, but the surface became somewhat coarse.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.153-160
• /
• 2003

While the interests on the environmental problem during the construction are increasing, the use of low noise-vibration auger-drilled pilling is increasing to solve noise and vibration problem in pilling. Therefore, in Korea, SIP(Soil-Cement Injected Precast Pile) method is mainly used as auger-drilled pilling. However, there is no proper design criteria compatible with the ground condition of Korea, so which is most wanted. To improve and supplement this situation, direct shear tests between SIP pile skin interface and soil were executed on various conditions. Through the analysis of test results, skin resistance characteristics of SIP were investigated thoroughly. Also, the nonlinear unit skin resistance capacity model with SM, SC soil were suggested.

• Journal of the Korean Home Economics Association
• /
• v.19 no.2
• /
• pp.135-141
• /
• 1981

This study was conducted to survey the end-use properties of the commercial men's socks. Date were obtained from 16 samples of men's socks gathered from department store, markets, specialty chain and variety store in street. Stretchness, performance of rib top, fiber contents, strength (abrasion and bursting), pilling properties and color fastness of socks tested in this study were as follows. 1. Stretchness of socks was sufficient but elongation of rib top was insufficient, therefore these facts are getting to become problem to consumers. 2. Fiber contents of samples were not in accord with the labelled item and criteria of Textile Fiber Product Identification Act. 3. Strength and pilling properties were vaious in according to fiber contents of socks. Socks blended of synthetic fibers were superior to that pure natural fibers in strength but not in pilling. 4. Color fastness to perspiration and rubbing were sufficient on the whole, but fastness to laundering in stain were very insufficient.

• The Journal of Natural Sciences
• /
• v.8 no.2
• /
• pp.191-198
• /
• 1996

We were investigated the change of shrinkage, pilling, tensile strength, color fastness and staining of Cotton, Nylon, Cotton/Nylon(60/40) socks after wearing and washing. From the experiment we found that color fastness of the color socks decreased corresponding to the frequency of wearing and washing. Our results showed that color fastness in the case of Cotton is best among them. Shrinkage was significant in Nylon/Cotton and Cotton socks. In the experiment of male and female socks, male showed a greater evidence of staining, shrinkage and pilling than female.

• The International Journal of Costume Culture
• /
• v.7 no.2
• /
• pp.103-111
• /
• 2004

The shrinkproof-finished wool fibers treated with resin coating and chlorination methods were used to find out an optimal shrinkproof finishing method keeping the quality properties of wool fabric to manufacturers. Shrinkage during repeated washing, electrostatic propensity, thermal resistance and pilling propensity of shrinkproof-finished wool knits, and analysis of finishing methods were measured. Upon the results from the surface examination of shrinkproof-finished wool fibers, the patterns of scale layer and degree of scale removal were subject to change according to the finishing processes. The shrink resistance was significantly enhanced on repeated washing of shrinkproof-finished knits, especially, chlorinated wool. Addition of strong physical force and alkali detergent applied in this washing experiment brought about superior effects with the low shrinkage rate although it was very severe washing conditions for wool fabrics. The results from the washing experiment implies that shrinkproof-finished knitted fabrics can be machine washed at individual households with other ordinary laundry. There was some changes and variation found in thermal resistance, electrostatic propensity, and pilling, however, it seems to be minor within standard limits. Therefore, shrinkproof-finished knitted fabrics did not bring serious changes to other physical properties comparing with original wool, which helps consumers handle wool knitted clothes more conveniently.