• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.11
• /
• pp.2108-2113
• /
• 2010

The Long Term Evolution (LTE) system is based on the Orthogonal Frequency Division Multiplexing (OFDM) and relies its channel estimation on the lattice-type pilot samples in the multipath fading channel environment. The estimation of the channel frequency response (CFR) makes use of the least squares estimate (LSE) for each pilot samples, followed by an interpolation both in time- and in frequency-domain to fill up the channel estimates for subcarriers corresponding to data samples. Any interpolation scheme could be adopted for this purpose. Depending on the requirements of the target system, we may choose a simple linear interpolation or a sophisticated one. For any choice of an interpolation scheme, these is a trade-off between estimation accuracy and numerical cost. For those wireless communication systems based on the OFDM and the preamble-type pilot structure, the DFT-based channel estimation and its variants have been successfully. Yet, it may not be suitable for the lattice-type pilot structure, since the pilot samples are not sufficient to provide an accurate estimate and it is known to be sensitive to the location as well as the length of the time-domain window. In this paper, we propose a simple interpolated based on the upsampling mechanism in the multirate signal processing. The proposed method provides an excellent alternative to the DFT-based methods in terms of numerical cost and accuracy. The performance of the proposed technique is verified on a multipath environment suggested on a 3GPP LTE specification.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.7A
• /
• pp.1022-1027
• /
• 1999

This paper proposes method that uses Time-Difference-of-Arrival(TDOA) of Forward Pilot signals from base stations(BS) arriving at a mobile station(MS) as a position location method of CDMA MS. MS searcher does acquisition of BS Pilot signals and measurement of TDOAs. In order to do it, its processing gain is very important. Proportional relationship of the gain to the signal coherent integration interval is theoretically derived and analyzed and field test is performed to show acquisition of weak Pilot signals and stable measurements of TDOA values by increasing the gain. Also, signal strength decrease exponentially by the distance it travels. Therefore, improvement of the searcher gain makes possible to acquire Pilot signals at a location far away from BS. Variation of possible position estimation area relative to the signal strength within a cell is simulated with computer. Neglecting shadow effect it indicated necessity of detecting signals below -35dB in order to cover over 90% of cell area. Thus, efforts to maximize searcher coherent integration interval in order to acquire weak Pilot signals are required for expansion of position estimation area and measurement of stable TDOA values.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.8
• /
• pp.1045-1050
• /
• 2006

Optimum operation condition for pilot scale of alkaline processing for fish muscle was investigated by measuring protein solubility, yield, texture, and water-holding capacity. Recovered protein yield was 33.2% for whole fish and 61.8% for minced muscle. Optimum homogenized speed and time, using industrial scale homogenizer, were 3,000 rpm and 5 min, respectively. Limited centrifugal force of continuous cylinder type was 4,000 rpm for recovering soluble protein, and 2,000 rpm for recovering precipitated proteins. The pH control agents such as citric acid, sodium phosphate and calcium oxide decreased the breaking force and deformation of recovered protein gel. The breaking force and deformation of the recovered proteins were high compared to conventional surimi. The breaking force and deformation were decreased by addition of salt, starch and bovine plasma proteins. Whiteness of recovered protein gel was lower than that of conventional surimi. Alkaline processing greatly decreased nitrogen content and chemical oxygen demand in waste water. The results suggest that alkaline processing has a potential as industrial production for recovering the proteins from fish muscle.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.08a
• /
• pp.61-64
• /
• 2000

본 논문에서는 cdma2000 규격을 채용한 역방향 링크 동기식 DS-CDMA 시스템을 시뮬레이션 하여 시스템의 성능을 분석하려다 cdma2000 시스템은 기존의 IS-95와는 달리 Pilot 채널을 이용하여 페이딩 채널을 추정하고 이를 이용하여 채널 환경에 의한 수신신호의 위상변화를 보상해 준다. 채널 추정필이 31pcg 심볼에서 Pilot 채널과 Traffic 채널의 최적의 전력비를 구하였다. 또한 시스템에 Power Control을 적용하여 Target FER을 만족시키기 위한 required Eb/No를 구하였고, 서로 다른 데이터율의 사용자가 동시에 전송할 때의 성능을 분석하였다.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.2
• /
• pp.408-414
• /
• 1999

In this paper, we propose the method using coherent detection with time division multiple pilot signal for each users I reverse CDMA channel as the structure of reverse CDMA channel to apply CDMA to upstream channel of bidirectional LMDS. By using coherent detection with pilot signal in reverse CDMA channel, capacity can be improved when compared with noncoherent detection, but it is required to allocate pilot signal for all user. And then interference is increased due to allocate continuously the pilot signals. In this case channel capacity is decreased. The method f pilot allocation is needed that reduce this interference and keep synchronization effect using coherent detection, In the reverse link, the pilot allocated to each users at different time and not overlapped is possible solution for it. this pilot is proposed and analyzed its performance and capacity. The result is that proposed method has more increased capacity compared wit others.

• Journal of Welding and Joining
• /
• v.27 no.1
• /
• pp.71-78
• /
• 2009

In the circumferential welding of pipe, welding phenomenon changes with the position of pipe. Especially in the overhead position, back bead of vertical-up position would be sunk. To investigate the size of back bead and keyhole with the change of the flow rate of pilot and shield gas at each position, bead-on plate welds were conducted on 6mm thickness SS400 with inclined-up position. When the rest of welding conditions remained constant, the width of back bead was increased as the flow rate of pilot gas was increased. And back bead tended to convex as the flow rate of shield gas was increased.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.11a
• /
• pp.118-121
• /
• 2021

슈퍼컴퓨터는 수백~수천 노드의 컴퓨팅 자원이 연결되어 복잡한 계산이나 대규모 데이터를 병렬 처리하며 일부 노드에서 발생하는 예상치 못한 문제는 전체적인 시스템 성능 저하로 이어질 수 있기 때문에 슈퍼컴퓨터 모니터링과 성능 분석은 슈퍼컴퓨터를 구축하고 운영하는데 필수적인 요소로 볼 수 있다. 본 논문에서는 오픈소스 소프트웨어인 Performance Co-Pilot, Bpftrace, Grafana를 활용한 슈퍼컴퓨터 모니터링 및 성능분석 시스템 구축 방안을 제안하였으며 이를 통해서 확장가능하면서도 유연한 구조의 슈퍼컴퓨터 모니터링 및 성능 분석이 가능함을 보였다.

• Journal of Biosystems Engineering
• /
• v.20 no.3
• /
• pp.262-274
• /
• 1995

A rice mill pilot plant was designed and developed in the basis of the simulation results on the mill plants. The performance of the developed rice mill plant was evaluated, and the simulation model on the mill system was validated with the experimental data in the mill plant. The results of this study were as followings : 1. A rice mill pilot plant with the capacity of 0.5 t/h was designed and developed. 2. The hulled ratio of the mill plant was 87.3%, and the milled rice recovery and the head rice recovery of the cleaned rice were 74% and 87% , respectively. The degree of milling of the cleaned rice was 10.6% with a high polish. The intensity of the cleaned rice appeared high compared with that of the milled rice in the analysis of whiteness test using an image processing system. 3. The bottleneck, processing time, and production amount of the developed mill system almost coincided with those of the simulation of the rice mill plant. The developed simulation model of the rice mill plant was proven to be applicable to the design of a rice mill plant through experiments.

• ETRI Journal
• /
• v.26 no.5
• /
• pp.397-404
• /
• 2004

In this paper, we provide a new detection scheme for a pilot symbol assisted interference nulling and cancellation operation to reduce unexpected effects owing to parallel transmission in orthogonal frequency division multiplexing (OFDM)-based spatial multiplexing systems. We have shown that the investigated OFDM vertical Bell laboratories layered space time (VBLAST) detection based on hybrid processing performs better than ordinary OFDM-VBLAST detections based on serial processing and parallel processing, respectively.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.5 no.3
• /
• pp.99-105
• /
• 2009

This paper suggests novel signal processing methods for optimal beamforming of smart antenna system in CDMA2000 mobile communication environments. This method utilize characteristics of the reverse pilot channel of CDMA2000 mobile communication systems, and applies them to improve the performance of an adaptive algorithm, which is used to a smart antenna system for beamforming. To perform the best beamforming, it is important to get an exact beamforming algorithm. This paper proposed an algorithm based on Laglange multiplier which has such an adaptive process, and also proposed the method to demodulate the received signal through array antenna using pilot channel in CDMA2000 environment. This paper analysed the enhanced performance of proposed algorithm in various signal environment through signal modeling of physical layer in CDMA2000 reverse link.