• 한국식품조리과학회지
• /
• 제32권1호
• /
• pp.27-43
• /
• 2016

We conducted comparative analysis on the quality characteristics five different classes of the Songgi (Pine inner bark) Garaetteok with different pine inner bark 0%, 1%, 2%, 3%, and 4%, respectively. The experiment results show that color values of the Songgi Garaetteok pine inner bark powder, the L value highest in control group 72.91 while a value was highest in 4% group. As a result of measurements for three days, the moist content for control group and 1% group 48.89 and 51.65, respectively two hours production. On day 1, the moist content of all samples peaked. Harness peaked in control group 954.13, followed by 4% group. The DPPH radical scavenging ability of pine inner bark powder and the Songgi Garaetteok containing 4% pine inner bark highest at 11.61% and 7.14%, respectively. In evaluating antibiosis, the Songgi Garaetteok containing 4% pine inner bark the highest level of antibacterial activity. In sensory evaluation, the Songgi Garaetteok containing 2% pine inner bark received the highest score color, flavor, texture, taste and overall preference. The experiment that the Songgi Garaetteok pine inner bark powder has better antioxidative effect regular Songgi Garaetteok. Therefore, the Songgi Garaetteok 2% pine inner bark powder the most desirable of the Songgi Garaetteok containing pine inner bark.

• Journal of the Korean Wood Science and Technology
• /
• 제22권1호
• /
• pp.28-33
• /
• 1994

The chemical compositions of pine bark from mechanical pulp industry were determined, and effect of Ca base acid sulfite on bark cooking was investigated under various conditions. The pine bark was composed of 39.5 % alkali extractives, 50.3 % lignin, and a small amount of carbohydrate. The contents of alkali extractives and lignin were remarkably higher than those of pine wood. The bark was composed of high content of arabinose and xylose, while the wood was composed of high content of mannose. When pine bark was cooked with 75 % free acid at 145 $^{\circ}C$, the rate of cooking and delignification was improved with the increase of total acid, but it was very difficult to delignify the bark by 50 % and over under these conditions. In the presence of 60~65 % free acid and at 155~165 $^{\circ}C$, initial cooking rate, delignification, and delignification selectivity were considerably increased, but condensation reaction of lignin was considerable at the end of cooking. Therefore, it was shown that pine bark was very difficult to delignify by the Ca-base acid sulfite cooking.

• Journal of the Korean Wood Science and Technology
• /
• 제12권3호
• /
• pp.9-14
• /
• 1984

The removal and readsorption effects of pine and oak bark grown in Korea on water pollution caused by heavy metal ions have been investigated. Bark saturated with heavy metal ions is refleshed with 0.1 N ammonium acetate and then its readsorption has been done. The results obtained are as follows: 1. Adsorption effect of pine bark is similiar to that of oak bark, and 20-40 meshed bark gives the best results. 2. 0.1 N amonium acetate of pH 7 shows more elutriative than the others such as pH 3 hydrochloric acid, pH 10 ammonium hydroxide and pH 7 water. 3 Pine bark refleshed with 0.1 N ammonium acetate gets two times as effective in adsorption as raw bark, and shows more effective than oak bark.

• 한국산림과학회지
• /
• 제6권1호
• /
• pp.1-5
• /
• 1967

We studied on the bark Percentage of red pine (Pinus denssiflora S & Z) and tarch (Larix Kaemdferi sargent) and obtained the results as follows: (1) For diameter classes from 8 to 38 cm in red pine. the linear equation adopts the relation of the bark percentage to the diameter more accurately than the logarithmic equation. (2) The difference between the regression equation of the bark percentage between red pine and Larch is significant and the correlation cofficient in red Pine is high so that standard error of red Pine is lower than its value of Larch. We established, therefore the tables of bark percentage for each species by applying the following regression equations. red Pine Y=10.08205-0.08794x Larch Y=10.3527-0.17071x.

• 한국농림기상학회지
• /
• 제7권4호
• /
• pp.258-264
• /
• 2005

The objectives of this study were to study 1) emergence of pine bark beetles, 2) larval density in residual timber on Idlest land by each felling season, and 3) the secondary damage rates in the tended forest. Pine forest land which had undergone tending had a higher secondary damage ratio $(59.6\%)$ by pine bark beetles than forest land that was not tended $(2.8\%)$. The number of escape holes averaged 11.3 0.31 per $250 cm^2$ on the bark of leaf trees in the tended forest. The number of escape holes was higher in the Jinju site than in the Hamyang site. The larval habitat density of pine bark beetles as compared with each felling period was higher after mid-October than in forests tended early in October. Thus, forests should be tended before early October in order to prevent secondary damage from pine bark beetles. Secondary damage in the tended forest was higher in the upper part $(75.5\%)$ of the tree crown than in the lower part $(49.2\%)$. The damage was higher in terminal shoots $(80\%)$ than in lateral shoots $(48\%)$. Therefore, secondary damage by pine bark beetles can cause deterioration of the elongation growth of the forest trees. In conclusion, if by-products of tended pine forest forests are neglected, they will be utilized as a propagation site for pine bark beetles (Blastophagus piniperda L). The propagated adults will damage the tender shoots of the leaf trees and thus seriously limittheir elongation.

• 한국환경보건학회지
• /
• 제39권2호
• /
• pp.151-158
• /
• 2013

Objective: This study was carried out to determine the depositional characteristics of pine needles, pine tree bark, moss, and soil, which are used as a passive air sampler (PAS) of atmospheric polychlorinated biphenyls (PCBs). Methods: All four media were sampled from the same site. PCB concentrations were analyzed by GC/MSD, and the lipid contents were measured using the gravimetric method. Results: The total PCB concentration (IUPAC No. 28, 52, 101, 138, 153, 180) was the highest in soil (227.97 pg/g dry), followed by pine needles (71.36 pg/g dry), pine tree bark (44.58 pg/g dry), then moss (21.91 pg/g dry). Pine needles contained the highest lipid contents (21.31 mg/g dry), whereas soil (10.01 mg/g dry), pine tree bark (4.85 mg/g dry), and moss (1.92 mg/g dry) contained less. The concentration of lower-chlorinated PCBs was relatively high in pine needles, pine tree bark and moss, but not in soil. The PCB concentrations were proportional to their lipid contents in pine needles, pine tree bark and moss, but a different trend was revealed in soil. Conclusions: The PCBs concentrations in the media were affected by various factors including atmospheric PCB concentrations, lipid contents, and depositional pathways. However, each of these factors had a varying influence depending on the type of medium.

• 생명과학회지
• /
• 제20권7호
• /
• pp.1047-1053
• /
• 2010

본 연구는 브로일러의 성장능력, 도체특성, 혈액지질, 면역능력 및 맹장미생물 변화에 관한 국산 적송수피추출물의 항생제 대체효과를 조사하기 위하여 수행하였다. 실험처리구는 대조구, 항생제 첨가구, 적송수피추출물 65ppm 및 80 ppm 첨가구 등 4개로 구분하여 완전임의배치였다. 브로일러의 성장능력, 도체특성, 도체중, 도체율, 가슴살과 다리살 무게는 적송수피추출물 80 ppm의 첨가구가 대조구, 항생제 첨가구와 비교할 때 유의하게 높았다. 복강지방은 브로일러 사료 내 2개의 서로 다른 수준의 적송수피추출물 첨가구가 대조구 및 항생제 첨가구에 비해서 유의하게 감소하였으나, 흉선, 비장 및 F낭 등 면역기관 무게는 적송수피추출물 80 ppm 첨가구에서 유의하게 증가하였다. 브로일러의 혈액 중성지방과 총콜레스테롤은 브로일러 사료 내 2개의 서로 다른 수준의 적송수피추출물 첨가구가 대조구 및 항생제 첨가구와 비교할 때 유의하게 낮았다. 혈액 IgG는 브로일러 사료 내 적송수피추출물 80 ppm 첨가구가 대조구 및 항생제 첨가구에 비해서 유의하게 증가하였다. 브로일러 맹장 내 Bifidobacterium, Lactobacillus 균수는 적송수피추출물 80 ppm 첨가구가 대조구 및 항생제 첨가구에 비해서 높았으나 Escherichia coli, Salmonella 균수는 감소하였으며 처리구 간 통계적인 유의차가 인정되었다. 본 연구결과는 브로일러 사료 내 항생제 대체제로서 국산 적송수피추출물 80 ppm을 첨가, 급여해주면 브로일러의 성장능력, 도체특성, 면역능력 향상 및 유익한 맹장미생물의 활성을 높여줄 수 있음을 시사해준다.

• 한국환경보건학회지
• /
• 제40권3호
• /
• pp.215-224
• /
• 2014

Objective: This study was carried out in order to determine the depositional characteristics of pine needles, pine bark, and soil used as a passive air sampler (PAS) for atmospheric polybrominated diphenyl ethers (PBDEs). Methods: All three media were sampled from the same site. The PBDE concentrations were analyzed by HRGC/HRMS, and the lipid contents were measured using the gravimetric method by n-hexane extraction. Results: The total PBDE concentration was the highest in soil (22,274.57 pg/g dry), followed by pine bark (20,266.39 pg/g dry), and then pine needles (7,380.22 pg/g dry). Pine needles contained the highest lipid contents (21.31 mg/g dry), whereas soil (10.01 mg/g dry), and pine bark (4.85 mg/g dry) contained less. There were poor correlations between lipid content and total PBDE concentrations in the media ($R^2$=0.8216, p=0.2814). Congeners BDE 47, 99, 183, 196, 197, 206, 207 and 209 showed peak concentrations. Among these, BDE 206, 207, and 209 are highly brominated PBDEs that exist as particulates in ambient air. They accounted for 81.2% [69.2 (pine needles) - 89.0% (tree bark)] of the concentration and therefore are noted as the main congener of the total PBDEs. Conclusions: It can therefore be concluded that for reducing error by improper sampling, the same species of media should be recommended for use as a PAS for atmospheric PBDEs due to the differences in depositional characteristics.

• Journal of the Korean Wood Science and Technology
• /
• 제48권6호
• /
• pp.861-868
• /
• 2020

The use of polyphenol extracts from radiata pine (Pinus radiata) bark as raw materials for bio-foams was investigated along with the optimal NaOH extraction conditions. The targeted yield of alkaline extracts was 60%, and the targeted pH was 11 to 12. The radiata pine bark was composed of 70% of a 1% NaOH extract, which contained mainly polyphenols, such as proanthocyanidin (PA). As the particle size of the bark decreased, the yield of the 1% NaOH extracts increased from 57 to 87%. A range of NaOH concentrations, liquor ratios, and extraction times were explored to establish an economic polyphenol extraction method. More than 60% of the alkaline extract was extracted, and the pH of the extract was approximately 12 when the optimum extraction conditions were employed, i.e., a liquor to bark ratio of 5:1, a NaOH dosage of 17 to 18% based on the bark weight, and a 1 h extraction time. Following neutralization of the alkaline extract, structural analysis indicated severe structural changes in the PA during the alkaline extraction. Because the alkaline extract was barely soluble in the solvent used for the structural analyses, it is assumed that chemical modification is required to increase the solubility of the alkaline extract for the production of bio-foams.

• 상하수도학회지
• /
• 제33권2호
• /
• pp.131-140
• /
• 2019

This study used a packed column reactor and a horizontal flow mesh reactor to examine the removal of copper ions from aqueous solutions using pine bark, a natural adsorbent prepared from Korean red pine (Pinus densiflora). Both equilibrium and nonequilibrium adsorption experiments were conducted on copper ion concentrations of 10mg/L, and the removals of copper ions at equilibrium were close to 95%. Adsorption of copper ions could be well described by both the Langmuir and Freundlich adsorption isotherms. The bark was treated with nitric acid to enhance efficiency of copper removal, and sorption capacity was improved by about 48% at equilibrium; mechanisms such as ion exchange and chelation may have been involved in the sorption process. A pseudo second-order kinetic model described the kinetic behavior of the copper ion adsorption onto the bark. Regeneration with nitric acid resulted in extended use of spent bark in the packed column. The horizontal flow mesh reactor allowed approximately 80% removal efficiency, demonstrating its operational flexibility and the potential for its practical use as a bark filter reactor.