• 한국환경과학회지
• /
• 제25권12호
• /
• pp.1689-1699
• /
• 2016

The growth conditions of planted trees, invasion of nuisance herbaceous species, competition between species, and effects of erosion control were monitored over five years in a riparian greenspace in Gapyeong County that was established through multilayered and grouped ecological planting. Of 156 trees planted in the upper and middle layers, 5.8% died. This tree death was attributed to poor drainage or aeration in the rooting zone from the clay-added root ball and too deep planting as well as a small-sized root ball and scanty fine roots. Of all the trees, 21.6% grew poorly due to transplant stress in the first year after planting, but they started to grow vigorously in the third year. This good growth was largely associated with soil improvement before planting, selection of appropriate tree species based on growth ground, and control of dryness and invasive climbing plants through surface mulching and multilayered/grouped planting. Mixed planting of fast-growing species as temporary trees was desirable for accelerating planting effect and increasing planting density. Thinning of fast-growing trees was required in the fifth year after planting to avoid considerable competition with target species. To reduce the invasion of herbaceous and climbing plants that oppress normal growth of planted trees, higher density planting of trees (crown opening of about 15%), woodchip mulching to a 10-cm depth, and edge planting 2 m wide were more effective than lower density planting (crown opening of 70%), no surface mulching, and no edge planting, respectively. This reduction effect was especially great during the first three years after planting. Nuisance herbaceous plants rarely invaded higher density planting with woodchip mulching over the five years. Higher density planting or woodchip mulching also showed much greater erosion control through rainfall interception and buffering than lower density planting with no mulching did. Based on these results, desirable planting and management strategies are suggested to improve the functions of riparian greenspaces.

• 한국작물학회지
• /
• 제43권1호
• /
• pp.44-48
• /
• 1998

Two determinate soybean cultivars, 'Baegunkong' and 'Namhaekong', were planted on 8 Jone, 23 June, and 8 July 1996 at Cheju at planting densities of 33, 43, 53, 63 plants per $m^2$ to determine the optimum planting density of double crop soybean for recently recommended cultivars in Cheju area at various planting dates. The plant height, and the diameter and node number of main stems decreased as planting was delayed. The plant height increased but the stem diameter and node number decreased with increasing planting density. Pod number per plant was greater for Namhaekong than for Baegunkong and was not affected by planting date. Pod number per plant decreased but pod numbers per $\textrm{m}^2$ increased with increasing planting density. The number of seeds per pod was greater at the two later plantings and fewer at the highest planting density. 100-seed weight decreased with delaying planting. The seed weight was lighter at the highest planting density for Baegunkong but there was no difference for Namhaekong among the planting densities. The seed yield of Baegunkong was greater for 23 June and 8 July plantings (2,280 and 2,420 kg/ha) than for 8 June planting (1,450 kg/ha) while that of Namhaekong was greatest at 23 June planting (2,690 kg/ha) compared with 8 June and 8 July plantings (1,890 and 2,080 kg/ha). Across the planting dates and cultivars, seed yield increased from 1,860 to 2,290kg/ha as the planting density increased from 33 to 53 plants/$\textrm{m}^2$ and then leveled off with a further increase in planting density.

• 한국조경학회지
• /
• 제26권2호
• /
• pp.251-258
• /
• 1998

The purposes of this study was to investigate accuracy and indigenity of landscape plant species in planting design and construction at housing complex and offer basic data for improving precision of planting construction. The scientific name of landscape plant species was described in planting drawings at only two sites among twelve survey sites. According to analysis on indigenity of plant species in planting drawings, it was found that the component ratio of foreign species was the highest and the component ratio of native species at public housing complex was the lowest. The component ratio of landscape plant species in planting construction was severely differed to that of planting drawings. Also the component ratio of cultivar was higher than that of planting drawings due to planting of sevveral cultivars for one species in planting drawings. In the result of accuracy analysis on landscape plant species in planting construction, it was found that mean ratio of inacccurate species was 33.2% at public housing complex, 29.6% at local company housing complex and 26.4% at nationwide company housing complex. It was found that several cultivars were planted for one species in planting drawings. The representative species which were planted by several cultivars were Camellia japonica, Rododendron spp., Prunus spp. and Magnolia spp. and so on. In order to promote the precision and speciality of planting design and construction, scientific and cultivar name of plants should be described in planting drawings.

• Journal of Biosystems Engineering
• /
• 제41권1호
• /
• pp.21-33
• /
• 2016

Purpose: In order to ensure that vegetable seedlings (with a soil block around their roots) are planted in an upright orientation after metering in a vegetable transplanter, they need to be dropped freely from a certain height. The walk-behind hand-tractor-powered machines do not have sufficient space to drop the seedlings from that height. In the present work, a hopper-type planting device was developed for the walk-behind hand-tractor-powered vegetable transplanter to ensure that the soil block seedlings are planted in an upright orientation. Methods: Various dimensionless terms were developed based on the dimensional analysis approach, and their effect on the planting of soil block seedlings in an upright orientation (planting efficiency) was studied. The optimum design dimensions of the hopper-type planting device were identified by the Taguchi method of optimization. Results: The ratio of the height of free fall to the sliding distance of the seedling on the surface of the hopper had the highest influence on planting efficiency. The planting efficiency was highest for plants with a height $15{\pm}2cm$. The plant handling Froude number, in interaction with the design of the hopper-type planting device, also significantly affected the planting efficiency. Of the hopper design factors, the length of the slide of the seedlings on the surface of the hopper was most important, and induced sufficient velocity and rotation to cause the seedling to fall in an upright orientation. An evaluation of the performance of the planting device under actual field conditions revealed that the planting efficiency of the developed planting device was more than 97.5%. Conclusions: As the seedlings were fed to the metering device manually, an increase in planting rate increased missed plantings. The planting device can be adopted for any vegetable transplanter in which the seedlings are allowed to drop freely from the metering device.

• 드라이브 ㆍ 컨트롤
• /
• 제17권4호
• /
• pp.125-132
• /
• 2020

The objective of this study was to analyze the axle load of a rice transplanter when planting rice seedlings at different working load conditions to select a suitable gear stage and a constant planting depth for rice seedlings. In this study, there are four levels of planting distances (26, 35, 43, and 80 cm) and three planting depths (low, medium, and high) with two gear stages (1.3 and 1.7 m/s). Axle loads and required planting pressures were analyzed statistically. It was observed that axle torques were increased with increasing planting depths for both gear stages, meaning that axle torques were directly proportional to planting depths for both gear stages. It was also observed that required planting pressures had a significant difference between planting distances. Planting pressures also showed significant difference according to gear stage and planting depth. These results indicate that planting pressures were directly proportional to both gear stage and planting depth. Results revealed that the automatic depth control system of a rice transplanter could not guarantee a constant planting depth as supplied pressures were variable. This indicates that a control algorithm is needed to ensure a constant planting depth. In the future, a control algorithm will be developed for an automatic depth control system of a rice transplanter to improve its comprehensive performance and efficiency.

• 한국환경생태학회지
• /
• 제18권2호
• /
• pp.236-248
• /
• 2004

본 연구는 서울시에 조성된 아파트단지내 녹지를 대상으로 식재개념, 식재밀도, 식재유형 및 패턴 등 배식특성을 조사.분석하여 개선방안을 제시하고자 실시하였다. 대상지는 아파트단지 녹지면적이 크게 달라지는 시기의 대표대상지인 1978년에 준공된 강서구 화곡주공아파트(2단지)(용적률:99%), 1983년에 준공되 강남구 삼익그린아파트(2차)(용적률:175%), 1992년에 준공된 강서구 동신대아아파트(용적률:225%)를 선정하였으며 녹지를 전면녹지, 측면녹지, 후면녹지로 구분하였다. 대상지의 녹지유형별 식재개념은 경관식재로만 이루어져 시기에 따른 차이는 없었으며 식재종에 있어서도 외래종 조경수목이 주를 이루어 녹지공간별 차이는 없었다. 아파트단지의 식재밀도은 교목 및 아교목층 0.0~0.2주/$m^{2}$로 관목층의 식재밀도가 부족하였으나 조성시기에 따른 식재밀도의 차이는 없었다. 층위구조는 교목.아교목층과 관목층 수목이 각각 다른 위치에 평면적으로 식재된 단층구조이었으며 녹지공간과 관계없이 독립식재, 열식재, 부등변삼각식재가 주로 활용되었다. 아파트 단지내 녹지는 공가별 식재개념에 따라 식재종, 식재밀도, 층위구조, 식재패턴이 다양하게 이루어져야 하므로 식재개념에 차별화시키기 위하여 전면녹지는 시각적 차폐와 미적인 기능, 후면녹지는 녹지량 증지 및 생태적 개념, 측면녹지는 녹지량을 증진을 주된 목적으로 조성할 것을 제안하였다.

• 한국조경학회지
• /
• 제51권3호
• /
• pp.21-36
• /
• 2023

기후변화 대응, 탄소중립 전략, 도시열섬, 미세먼지, 생물다양성 증진 등 환경이슈에 대한 해결책으로 도시녹지와 수목의 가치가 중요해지고 있으며 다양한 연구들이 도시환경개선을 위한 수목의 효과를 다루고 있다. 따라서 본 연구는 도시환경개선 측면에서 식재수종, 식재구조, 식재밀도, 식재기반의 선행연구를 종합적으로 고찰하여 도시공원 조성녹지의 식재 리뉴얼 방향성을 제안하고 이를 리뉴얼 계획에 적용해 조경수목을 통한 도시환경개선 효과를 제고하는 데 목적이 있다. 서울시 내 대규모 근린공원인 서울어린이대공원의 식재현황을 현장조사하고 조사자료를 근거로 식재기능평가를 했으며 식재기능개선 필요지역을 중첩 도출하였다. 식재기능평가는 공원기능 설정, 공간기능에 따른 식재개념, 식재현황 단계별로 수행하였고, 연구의 결과인 기능변화에 따른 식재 리뉴얼 방향은 식재기능평가 단계별로 도출하였다. 공원기능 설정은 녹지율을 높이는 것이 우선이나 이용자 편의도 고려해야 하며, 식재개념으로 시각적 경관식재는 교목층은 수형이 아름답고 탄소흡수와 미세먼지 저감효과가 높은 수종을 식재, 생태적 경관식재는 경사구배 위 다층구조 식재지 조성, 완충식재는 다층구조숲으로 조성하여 탄소흡수와 미세먼지 저감 효과 향상, 녹음식재는 활엽수 교목층과 초본층으로 구성하고 초본류의 자연형 식재를 지향해야 한다. 식재수종은 도시환경개선 효과가 높은 수종, 지역 자생종, 야생조류 선호 수종을 식재하고, 식재구조는 경관식재지와 녹음식재지는 교목층과 관목층, 교목층과 초본층으로 구성하고 생태성이 강조되거나 완충기능이 필요한 식재지는 다층구조로 조성한다. 식재밀도는 식재간격 기준으로 더 높은 기준을 적용하며, 식재기반은 빗물재활용과 토양객토 및 통기시설을 사용한다. 본 연구의 결과는 향후 노후 도시공원의 식재리뉴얼 계획 시 식재기능평가를 수행하여 식재기능개선 필요지역을 도출하는 데 적용할 수 있으며, 조성녹지의 기능변화 패러다임을 다각도로 반영한 식재 리뉴얼 방향성을 제시했다는 점에서 의의가 있다.

• 한국작물학회지
• /
• 제44권2호
• /
• pp.106-111
• /
• 1999

To investigate the effects of planting density and nitrogen level on growth and yield potential of newly bred heavy panicle japonica rice with large grain (Iksan 435 and Iksan 438) or many spikelets per panicle(HR14022-21-8-4 and HR14022-21-8-6), four heavy panicle type rices and two many panicle type rices(Dongjinbyeo and Donganbyeo) as the checks were planted under standard planting density (30$\times$15 cm) and dense planting density (15$\times$15 cm) with two nitrogen levels of standard nitrogen level(110 kg h $a^{-1}$) and heavy nitrogen level(165 kg h $a^{-1}$). Effective tiller rate decreased in dense planting or heavy nitrogen, when compared to standard nitrogen and planting, while leaf area index and to dry weight increased in dense planting or heavy nitrogen. Tiller numbers and panicle numbers were more increased by dense planting than heavy nitrogen, whereas spikelet numbers were more increased by heavy nitrogen than dense planting. Ripened grain ratio was slightly lower only in dense planting. 1,000 grain weight in brown rice was not significantly different in dense planting or heavy nitrogen. Milled rice yield was highest in heavy nitrogen with standard planting for heavy panicle type rice, while yield for many panicle type rice was highest in heavy nitrogen with dense planting, suggesting that many panicle type rice possesses higher adapt-ability for dense planting than heavy panicle type rice. Path coefficient analysis revealed that top dry weight, spikelet number and grain weight were the greatest positive contributors to yield, whereas tiller number was negative to yield.d.

• 한국초지조사료학회지
• /
• 제42권1호
• /
• pp.54-60
• /
• 2022

최근 봄 가뭄과 이모작 작부체계로 인하여 옥수수의 파종시기가 지연되고 있다. 따라서 본 시험은 옥수수 품종을 한 달 간격으로 조기파종(4월 12일), 만기파종(5월 10일)으로 파종하였을 때 사일리지용 옥수수 품종의 생육특성, 사초 생산성 및 사료가치를 비교하기 위하여 중부지방(충남 천안)에서 4월 12일부터 8월 20일까지 수행하였다. 옥수수의 착수고는 만기파종이 조기파종보다 높았으나(p<0.05), 초장은 품종간에 유의적 차이가 없었다. 내도복성은 품종간에 차이가 있었으나(p<0.01) 파종시기간에 차이가 없었다. 반면 내충성은 품종간에 차이가 없었으나 파종시가간에는 차이기 있었다(p<0.05). 흑조위축병(RBSDV) 이병률은 만기파종이 조기파종보다 낮았다(p<0.001). 암이삭 비율은 품종 간에 유의적 차이가 보였다(p<0.01). 건물 및 TDN 수량도 조기파종에 비해 만기파종이 유의적인 차이를 보였다(p<0.01). 조단백질은 파종시기간에 유의적 차이는 보였지만, 품종간에 유의적 차이는 나타나지 않았다. 만기파종의 ADF 함량은 조기파종보다 낮았으나(p<0.01), NDF 함량은 품종 간에 유의적 차이가 없었다. 조기파종보다 만기파종의 TDN 및 비유정미에너지(NE_L)가 높았다. 따라서 우리나라 각 지역별 기후와 강수량을 고려하여 이모작 작부체계에 적합한 동계사료작물을 재배 후 여름사료작물인 사일리지용 옥수수의 파종시기를 5월 중순까지 늦추어도 생산성 및 사료가치가 높을 것으로 사료된다.

• 한국자원식물학회지
• /
• 제2권2호
• /
• pp.252-258
• /
• 1989

This study was investigated to find out the optimum planting densities of Aptum graveolns L. about growth characters, yield components and yi-eld at 9 planting densities by transplanting cultureThe results obtained are summarized as follows ;1 . Studying the correlationship, the highly negative significances we-re found between planting densities and petiole weight , planting d-ensities and plant weight , respectively .2. Plant hight was longest in spacious planting, and was short in dense3 . Petiole yield was thinkest in planting densities(50$\times$35n), and wasthin in planting densities(40$\times$25n) .4. Yield of Petiole was increased in PLanting densities(50$\times$25cn) ,quality and yield of petiole were highest by optimum plantting densi-ties (50$\times$35cn ) .