• KSBB Journal
• /
• v.8 no.2
• /
• pp.133-142
• /
• 1993

The effects of genetic and environmental factors on productivity of a cloned protein were studied in recombinant Saccharomyces cerevisiae. Plasmid stability and copy level were very high for a $REP^+$ system(at ca. 10 generations, stability: 65-90%, plasmid copy number per cell: 40-200), whereas these were very low for a yep- system(at ca. 10 generations, stability: 30%, plasmid copy number per cell 20). In plasmids containing the $2{\mu}m$ circle genome, a $[cir^o]$ strain was a preferred host cell since the plasmid stability and the copy number in a $[cir^o]$ strain were higher than in a $[cir^+]$strain. Cloned gene expression was dependent on plasmid copy number and stability. The inducer (galactose) level played a very important role in cloned lacZ gene expression, showing that a galactose concentration of 0.8% was sufficient for induction of gene expression. Induction rate was very fast in the case of plasmids exhibiting high stability and copy number by a factor of 4 to 25. The time to reach the peak value of gene expression was longer when galactose was added at the start of fermentation (ca. 26 hours) than at the mid-exponential phase (ca. 6 hours). Glucose repression was reduced by a factor of 2 to 5 as the relative inducer level increased.

• Microbiology and Biotechnology Letters
• /
• v.17 no.6
• /
• pp.606-610
• /
• 1989

For the purpose of improving glucoamylase productivity of Saccharomyces diastaticus, useful yeast in direct ethanol fermentation of starch, the effects of growth rate on the plasmid stability and glucoamylase productivity of S. diastaticus harboring recombinant plasmid pYES 18 containing glucoamylase gene STA 1 were investigated. In a selective medium, the recombinant plasmids were maintained stably at constant level but glucoamylase productivity was very low. On the other hand, in the complex medium containing starch, growth rate of the cell was stimulated by the supplementation of glucose and plasmid stability was improved by growth stimulation. We can conclude that glucoamylase productivity of S. diastaticus harboring the recombinant plasmid was increased as the maintaining of high plasmid stability in the cell.

• Microbiology and Biotechnology Letters
• /
• v.19 no.5
• /
• pp.433-438
• /
• 1991

The plasmid pSY130-14 for the high production of phenylalanine is a temperaturecontrollable expression vector composed of the $P_R$ and the $P_L$ promoter and a temperature sensitive repressor, $cI_{857}$ of bacteriophage lambda. Strain AT2471 harbouring plasmid pSY13O- 14 is induced the phenylalanine production by shifting up the incubation temperaure to $38.5^{\circ}C$. Plasmid stability of E. coli AT2471 harbouring pSY130-14 was very low, it was about 30% after 48 h cultivation at $38.5^{\circ}C$ without kanamycin. The plasmid disappeared immediately at $40^{\circ}C$ without kanamycin, and at $40^{\circ}C$ adding kanamycin, the plasmid stability decreased at the beginning, but rose with the extension of the culture time. For the improvement of plasmid stability, the plasmid obtaind was designated as pSY15O-1 by changing origin region (ori) pACYC 177 of pSY130-14 for ori pSC101. E. coli AT2471 harbouring pSY150-1 was stable at $38.5^{\circ}C$ without tetracycline, and the plasrnid stability was about 40% after 48 h cultivation at $40^{\circ}C$.

• Journal of Microbiology and Biotechnology
• /
• v.4 no.1
• /
• pp.1-6
• /
• 1994

Continuous culture was carried out with a recombinant Escherichia coli W3110/pCR185, which encodes trp-operon enzymes when the temperature is shifted from $37^{circ}C\;t;42^{\circ}C$. Under derepressed condition of $42^{\circ}C$. plasmlid stability and gene expression were analysed as function of the dilution rate. The stability of plasmid increased with the dilution rate, but maximal levels of gene expression (tryptophan concentration) and plasmid DNA content were obtained at the lowest dilution rate, $0.075\;hr^{-1}$. The plasmid instability, observed at low dilution rates, could be explained by the unbalanced biosynthetic state of the recombinant cell harboring a high copy number of plasmid.

• Korean Journal of Microbiology
• /
• v.31 no.1
• /
• pp.37-43
• /
• 1993

The effect of stb locus of E. COLI IncFII plasmid NR1 on the stability of chimeric plasmids was investigated. First, we have isolated the stability locus (stb) from E. coli NR1 plasmid and then inserted into the three different vectors, pUC8, YRp17 and YEp24. By examining their stability in E. coli and yeast, we showed that the recombinant plasmids containing stb locus were resonably stable. Also, by comparing the amounts of the rDNA fragments per haploid genome with those of the plasmid fragments, we showed they copy number of recombinant plasmids was not increased. Consequently, the stb locus of E. coli IncFII plasmid NR1 stabilized the chimeric plasmids but did not affect the replication or copy number of plasmids.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.2
• /
• pp.222-228
• /
• 2001

Vibrio metschnikovii strain RH530 is a non-pathogenic, industrially-important alkaline protease producer which has been isolated from wastewater. In this paper, we report on the transformation of this strain by using the method of electroporation. A field strength of $7.5\;kVcm^{-1}$ and $25\;{\mu}F$, and using a 0.2-cm cuvette, appeared to be the optimal conditions for electroporation of the cells with the recombinant pSBCm plasmid carrying the vapK alkaline protease gene and the ColE1 replicon. Cells were subjected to osmotic shock in order to remove extracelluar DNase, and adding 200 mM of sucrose to electroporation buffer cells showed an increased transformation efficiency. Maximum efficiency of transformation was obtained at an early exponential growth phase. Using all of the conditions mentioned above, we routinely obtained a transformation efficiency of more than $10^4{({\mu}g\;plasmid\;DNA)}^{-1}$. The stability of the plasmid pSBCm in V. metschnikovii RH530 was 25% after 18h of growth (27 generations) in the medium without antibiotic selection. The insertion of the par locus to the pSBCm increased the stability of the plasmid up to 42% without selective pressure. The increase in plasmid stability was accompanied by the increase in the productivity of alkaline protease in the recombinant V. metschnikovii strain RH530. Determining optimal conditions for the transformation of the industrially-important, nonpathogenic Vibrio strain, and the improvement of plasmid stability by introducing the par locus into the high copy number plasmid vector, will allow the development of procedures involved in the genetic manipulation of this strain, particularly for its use in the production of industrial enzymes such as alkaline protease.

• Journal of Microbiology and Biotechnology
• /
• v.4 no.1
• /
• pp.13-19
• /
• 1994

A model equation to describe the plasmid instability in recombinant Escherichia coli fermentation is proposed. The equation allows one to estimate easily the two model parameters; (1) the difference in the specific growth rates between plasmid-free cells and plasmid-harboring cells ($\delta$), and (2) the probability of plasmid loss by plasmid-harboring cells ($\rho$). The estimated values of $\delta and \rho$ were in the range of 0.02-0.07 and $10^{-3}-10^{-5}$, respectively, and were strongly dependent on the dilution rate. As another parameter, the ratio of specific growth rates of plasmid-free cells and plasmid-harboring cells ($\alha$) was calculated and the result showed the highest value of 1.28 at the lowest dilution rate of 0.075 $hr^{-l}$, examined in this work. By the sensitivity analyses on the estimates of $\delta and \rho$, it was found that the growth rate difference ($\delta$) affected the plasmid instability more seriously than the probability of plasmid loss ($\rho$). Furthermore, the profound instability of plasmid at low dilution rate could be explained by the high values of $\alpha and \rho$.

• Journal of Pharmaceutical Investigation
• /
• v.26 no.4
• /
• pp.291-297
• /
• 1996

Liposomes of $pSV-{\beta}-Galactosidase$ vector plasmid DNA with various lipid composition were prepared by the thin-film method. Size distribution, shape and the efficiency of plasmid DNA encapsulation were investigated. Effect of sonication time on the plasmid DNA entrapment in liposomes and stability at $4^{\circ}C$ were also examined. Sizes of neutral liposomes were about 100-200 nm and above $1\;{mu}m$, and those of cationic liposomes were about 400-600 nm and above $1\;{mu}m$. Shapes of liposomes entrapped plasmid DNA were spherical. Proper sonication time for better entrapment was below 15 minutes and stability at $4^{\circ}C$ was decreased rapidly after 1 day. Plasmid DNA entrapments of complex liposomes of various lipids were higher than those of liposomes made from one sort of lipid. Plasmid DNA entrapments of cationic liposomes were higher than those of neutral liposomes.

• Korean Journal of Microbiology
• /
• v.29 no.3
• /
• pp.149-154
• /
• 1991

Escherichia coli/Corynebacterium glutamicum shuttle vectors, pECCG1 and pECCG2 were constructed by joining a 3.00 kb cryptic plasmid pCB 1 from C. glutamicum and a 3.94 kb plasmid pACYC 177 from E. coli. By trimming unessential parts and introducing mulitiple cloning site into the plasmid pECCG 1, a plasmid pECCG122(5.1kb) was constructed. All the shuttle vectors were stably maintained in C. glutamicum up to about 40 generations irrespective of kanamycin addition in the medium. Threonine operon (homoserine dehydrogenase/homoserine kinase) and dapA gene (dihydrodipicolinate synthetase) of C. glutamicum were cloned into the plasmid pECCG122, and the resultant plasmids were designated pTN31 and pDHDP19, respectively. They were used to study the effect of cloned foreign gene on the stability of the plasmid pECCG122. Plasmids pTN31 and pDHDP19 were segregated rapidly from C. glutamicum when cultured in the medium without kanamycin. In medium with $50\mu${\g/ml} of kanamycin, their segregation rates were much slower than those in medium without kanamycin, but the danamycin addition didn't guarantee the complete maintenance of the plasmids in C. glutamicum.

• Journal of Microbiology
• /
• v.34 no.3
• /
• pp.241-247
• /
• 1996

The stability of the genetically engineered microorganisms and their recombinant plasmids released in natural environments has been regarded as one of the molecular ecological topics. In this study, the recombinant plasmids pCU103 in which the pcbCD genes involved in biodegradation of biphenyl and 4-chlorobiphenyl were cloned in pBluescript SK(+) vector, were examined for their structural and functional stability in different waters at 15 $^{\circ}C$ by the methods of electrophoresis, Southern hybridization, quantification with fluorescent dye, and transformation. The recombinant plamids maintained their stabilities for about 30 days in sterilized distilled water (SDW), 15 days in autoclaved creek water (AW), 25 days in filtered and autoclaved non-sterile creek water (FAW), 4 days in Luria-Bertani (LB) broth, and less than one day in filtered non-sterile creek water (FW). The covalently closed circular (CCC) form of the plasmid was decreased and open circular (OC) form was increased as a function of incubation time, and then linear (L) form was produced to be ultimately degraded out. The degradation rates of the plasmid were proportionally correlated to trophic level of the water, and the biological factor such as DNases was found to be one of the most critical factors affecting structural and functional stability of the plasmid in non-sterile natural water.