• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.2_1
• /
• pp.79-89
• /
• 2021

Poly(lactic acid) (PLA) is considered as one of the most promising bio-based polymers due to its high strength, high modulus, good processability, transparency after processing, and commercial availability. This study aimed to investigate the mechanical, thermal, and migration properties of poly(lactic acid)/zeolite (10 phr) composites prepared with various biocompatible plasticizers, such as triethyl citrate(TEC), tributyl citrate(TBC), and poly(ethylene glycol)(PEG400), through differential scanning calorimetry(DSC), thermo-gravimetric analysis(TGA) and standard tensile testing. The incorporation of PEG400 significantly increased the elongation at break, and DSC results showed that the addition of plasticizers drastically decreased the T_g of PLA/zeolite composites and improved the melt flow and processability. Besides, it was found from TGA results that PLA/zeolites composites plasticized by TEC and TBC were more easily to be thermally degraded than the composites plasticized by PEG400.

• Journal of the Korean Magnetic Resonance Society
• /
• v.9 no.2
• /
• pp.103-109
• /
• 2005

New PVC plasticizer, 2,2,4-trimethyl-1,3-pentanediol-1-butyrate-3-isobutyrate was synthesized via simple esterification with butyric acid and Texanol(a trademark of Eastman Chemicals), the mixture of 2,2,4-trimethyl-1,3-pentanediol-3-isobutyrate and 2,2,4-trimethyl-1,3-pentanediol-1-isobutyrate. The analysis of $^1H-1D,\;^{13}C-1D$ NMR and HMBC spectra identified internal-ester-transfer of 2,2,4-trimethyl-1,3-pentanediol-1-isobutyrate during the reaction. 2,2,4-trimethyl-1,3-pentanediol-1-butyrate-3-isobutyrate gave better properties in PVC than 2,2,4-trimethyl-1,3-pentanediol diisobutyrate(TXIB, a trademark of Eastman Chemicals) such as lower viscosity, higher tensile strength and better elongation. In particular, remarkably reduced migration compared with TXIB suggested a reduced emission of VOC(volatile organic compound) from PVC.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.3
• /
• pp.345-349
• /
• 2003

The quantity, process and kinetics of di-(2-ethylhexyl)phthalate (DEHP) migration in the 30/70 and 40/60 poly(vinylchloride) (PVC)/DEHP blends were investigated using gas chromatograph. A thin and flexible PVC sheet was soaked in surrounding medium (SM) of water/ethanol mixture and acetonitrile with constant stirring to release DEHP. By observed concentration of DEHP in the SM, it is found that acetonitrile is more intense in DEHP migration than water/ethanol mixture. In addition the amount of extracted DEHP is proportional to the leaching temperature and added ratio of DEHP. The behavior of DEHP migration from flexible PVC sheets was described by the Ficks's law with $2.72-10.1\;{times}\;10^{-10}$ cm²/s of the diffusion coefficients.

• Proceedings of the Korean Society of Food Hygiene and Safety Conference
• /
• 2002.05a
• /
• pp.127-131
• /
• 2002

Migration of di-(ethylhexyl)phthalate (DEHF) from PVC food packaging materials detected plasticizer into food simulanting solvents(4% Acetic acid, 8% Ethanol, 50% Ethanol, 95% Ethanol, Heptane) were studied. For executing this study ,2 PVC food packaging materials detected DEHP were used. Analysis was by GC-FID and GC-MSD(selected ion monitoring) for DEHP, and optimized for quantification of plasticizer. The recovery of DEHP into food simulanting solvents were min. 87.4${\pm}$ 3.6 ∼ max. 109.9 ${\pm}$ 10.7% respectively. Following exposure to food simulants 95% Ethanol for 24hours at 60$^{\circ}C$ the migration results of 1020.90 ${\pm}$ 10.15$\mu\textrm{g}$/g, 563.54 ${\pm}$ 5.60$\mu\textrm{g}$/dm$^2$and 73.51 ${\pm}$ 5.09$\mu\textrm{g}$/g 149.22 ${\pm}$ 10.34$\mu\textrm{g}$/dm$^2$were detected from the container for lunch and for stock fish respectively.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.15 no.2
• /
• pp.61-65
• /
• 2009

This study was conducted to investigate the safety status of gasket of glass bottle being used for the Bulgogi sauce. The content of plasticizers in the gasket and their migrated amounts into Bulgogi sauce were determined. Among the plasticizers analyzed, only di-isodecyl phthalate (DIDP) was detected in the range between 30.6 and 35.9% from 6 samples. None of the plasticizers was detected in the sauce. Therefore, it can be concluded that the safety status of the gasket tested met the requirement of limit values as prescribed for the migration test of food packaging utensils, containers and packages of the Korea Food Code.

• Composites Research
• /
• v.35 no.4
• /
• pp.232-241
• /
• 2022

Plasticizers are chemical additives added to polymers to have a desirable effect on mechanical properties such as processability and ductility. In this paper, we explore the use and market of eco-friendly plasticizers that can replace phthalate-based plasticizers that have been traditionally used in the plastics market. Bio plasticizers are derived primarily from biomass sources, including agricultural products, by-products and wastes. Regardless of the source of biomass, an ideal eco-friendly plasticizer should be non-toxic, have high resistance to volatilization, extraction, and migration, have good compatibility and compatibility, and be economical. The global bio plasticizer market is expected to reach USD 2.1 billion by 2030 from USD 1.3 billion in 2020, growing at a CAGR of 5.31% from 2021 to 2030.

• Analytical Science and Technology
• /
• v.23 no.4
• /
• pp.357-362
• /
• 2010

Phthalate plasticizer is not human carcinogens which has been classified as environmentally hazardous substance. Phthalates are absorbed into the body and cause tumors and ecological mutation to human potentially as reproductive toxic substances. For this reason, in some countries the use of phthalates in products for children has been banned. In this study, we proposed the analytical method of phthalate content and migration rate for children's product which was compared and reviewed to the analytical method of various countries, United States, Japan, European Union. The children's product on the proposed analytical method was analysed to consider of the correlation between the phthalate content and migration rate, but there was no correlation both of them.

• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.42-49
• /
• 2017

To replace phthalate plasticizer for PVC, acetylated monoglyceride (AMG) plasticizers were prepared from plant oil and their plasticization effects were also investigated. Transesterification of coconut oil by glycerol followed by acetylation with acetic anhydride gave AMG-CoCo (Coco : Coconut Oil). In addition, AMG-GMO (GMO : Glycerol monooleate) and AMG-GMO-Epoxy were synthesized by acetylation and epoxidation with glycerol monooleate. It was found that the thermal stability of AMG plasticizers increased in the following order: AMG-GMO-Epoxy > AMG-GMO > AMG-CoCo and all three plasticizers were thermally more stable than those of common petroleum-based plasticizer DOP (Dioctyl phthalate). The tensile strain values of the PVC containing AMG compounds were ca. 770~810%, while tensile strength values were ca. 19~22 MPa, which were higher than those of PVC containing DOP. DMA (Dynamic Mechanical Analysis) results showed that the miscibility of AMG-GMO-Epoxy in PVC was excellent and the $T_g$ of PVC containing AMG-GMO-Epoxy at 50 phr decreased down to $24^{\circ}C$. Finally, the leaching experiment result showed that the weight loss values of PVC containing AMG-GMO and AMG-GMO-Epoxy at 50 phr were as low as 2 and 1%, respectively, indicating that they have high water migration resistance. The above findings suggested that AMG-GMO-Epoxy could be one of plant oil-based PVC plasticizers to replace DOP.

• Analytical Science and Technology
• /
• v.15 no.1
• /
• pp.72-79
• /
• 2002

Di-(2-ethylhexyl)phthalate (DEHP) may be released from plasticized poly(vinyl chloride) (PVC) articles. In the cases of various methods for the quantitative analysis of migrating DEHP, there are much differences in migrating quantity according to the experimental methods. It is therefore important to make the comparison and analysis between these two results. A study of DEHP migration from blood and infusion bags has been carried out in different methods to evaluate the amount of DEHP migration using gas chromatograph and UV-vis spectrophotometry. Five PVC bags were cut into plane sheets in size of $40{\times}10{\times}0.4mm$, then were immersed in extraction solvent for an hour to release DEHP. It was determined by a gas chromatograph that $23.2{\sim}70.9{\mu}g/mL$ of DEHP was extracted. While extraction solvent was injected into PVC bags which were then placed for an hour to leach DEHP out. It was checked by a UV-vis spectrophotometer that the concentration of DEHP in extraction solvent was $24.8{\sim}41.3{\mu}g/mL$. Two results show different values according to the extraction conditions and experimental methods and the gas chromatographic results were converted into UV-vis spectroscopic results on condition that DEHP would be extracted equally per unit time and unit contact area. It was concluded that DEHP migrating amounts are approximately equal in two analytical methods.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.3
• /
• pp.60-70
• /
• 2001

The study of compatible liner with ADP-505 propellant based PCP was performed. HTPB/DDl was chosen as a binder of liner in order to prohibit migration of nitroester plasticizer from propellant. The possible formulations for liner were screened by peel test of EPDM insulation/liner, propellant/liner and insulation/liner/propellant. Also, the adhesion tests including tension and shear were conducted. The adhesion of liner and propellant fumed out to be very good. The peel value was shown 1.5∼1.8 daN/cm, tensile force was 5.5∼6.0bar and shear force was 4.2∼5.0bar. In the samples of insulation/liner/propellant, they also have shown good adhesion properties. The peel, tensile and shear strength were 1.8 daN/cm, 5.0∼6.0bar and 4.5∼5.0bar, respectively.