• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.709-714
• /
• 2002

Recently, the applications of corrugated plates(or folded plates) are increasing due to economic and structural advantages in certain situations. And, because of the higher strength of corrugated plates than flat plates, the usage of the corrugated plates is increasing. So there are many necessities for specifications of corrugated plates. For flat plates, there are many design details in almost specifications. However, there are no detail design guides such as shear strength except the bending strength and the normal strength. So, it is difficult for engineers to design structures consist of corrugated plates. Therefore, a provision is necessary for engineers to refer for designing corrugated plates. The conclusion of this study shows a formula that helps to determine the shear strength of corrugated plates under various geometric conditions ; the size of corrugation ; the curvature of corrugation and ; the thickness of the corrugated plate. Also, it shows that corrugated plates have higher shear buckling strength than flat plates.

• 오토저널
• /
• 제15권3호
• /
• pp.68-74
• /
• 1993

The mixed convection heat transfer has been studied numerically for misaligned and parrallel arrays of two flat plates at 100.leg.Re.leg.700, 0.1.leg.B.leg.1.0, 0.2.leg.leg.PHI.$_{R}$.leg.1Gr=10$^{4}$ and Pr=0.71. For misaligned plates and parallel plates, the optimum plate spacings move to the narrow spacing as Reynolds number and .PHI.$_{R}$ increase and can be expressed by the correlation equations at Gr=10$^{4}$. The optimum plate spacings for parallel plates sharply move to the narrow spacing compared with misaligned plates. The maximum mean Nusselt number of parallel plates shows higher value than that of misaligned plates and can be expressed by the correlation equations at Gr=10$^{4}$.EX>.

• Structural Engineering and Mechanics
• /
• 제12권3호
• /
• pp.283-295
• /
• 2001

The postbuckling behaviour of thin plates is an important phenomenon in the design of thin plated structures. In reality plates possess small imperfections and the behaviour of such imperfect plates is of great interest. To numerically study the postbuckling behaviour of imperfect plates explicit incremental or secant matrices have been presented in this paper. These matrices can be used in combination with any thin plate element. The secant matrices are shown to be very accurate in tracing the postbuckling behaviour of thin plates.

• 한국산학기술학회논문지
• /
• 제4권2호
• /
• pp.76-80
• /
• 2003

본 연구에서는 직교이방성 박판 및 후판의 휨문제에 대한 해석결과를 제시하였다. 수치해석방법으로는 유한요소법을 사용하였으며, 직교이방성판 휨문제에 대한 지배방정식은 Kirchhoff가정에 의한 박판이론과 Mindlin 가정에 의한 후판이론을 이용하여 유도하였으며 판의 폭-두께비의 변화에 따른 해석결과를 비교 검토하였다.

• 복합신소재구조학회 논문집
• /
• 제1권4호
• /
• pp.1-5
• /
• 2010

In this study, it is presented analysis results of bending problems in the anisotropic cantilever thick plates and the anisotropic laminated cantilever thin plates bending problems. Finite element method in this analysis was used. Both Kirchoff's assumptions and Mindlin assumptions are used as the basic governing equations of bending problems in the anisotropic laminated plates. The analysis results are compared between the anisotropic laminated cantilever thick plates and the anisotropic laminated cantilever thin plates for the variations of thickness-width ratios.

• Structural Engineering and Mechanics
• /
• 제7권3호
• /
• pp.289-302
• /
• 1999

An approximate method for analyzing the bending problems of irregular-shaped plates is proposed. In this paper irregular-shaped plates are such plates as plate with opening, circular plate, semi-circular plate, elliptic plate, triangular plate, skew plate, rhombic plate, trapezoidal plate or the other polygonal plates which are not uniform rectangular plates. It is shown that these irregular-shaped plates can be considered finally as a kind of rectangular plates with non-uniform thickness. An opening in a plate can be considered as an extremely thin part of the plate, and a non-rectangular plate can be translated into a circumscribed rectangular plate whose additional parts are extremely thin or thick according to the boundary conditions of the original plate. Therefore any irregular-shaped plate can be replaced by the equivalent rectangular plate with non-uniform thickness. For various types of irregular-shaped plates the convergency and accuracy of numerical solution by proposed method are investigated.

• 대한두개안면성형외과학회지
• /
• 제20권5호
• /
• pp.297-303
• /
• 2019

Background: Absorbable plates are widely used in open reduction and internal fixation surgeries for facial bone fractures. Absorbable plates are made of polyglycolic acid (PGA), polylactic acid (PLA), polydioxane (PDS), or various combinations of these polymers. The degradation patterns of absorbable plates made from different polymers and clinical courses of patients treated with such plates have not been fully identified. This study aimed to confirm the clinical courses of facial bone fracture patients using absorbable plates and compare the degradation patterns of the plates. Methods: A retrospective chart review was conducted for 47 cases in 46 patients who underwent open reduction and internal fixation surgery using absorbable plates to repair facial bone fractures. All surgeries used either PLA/PGA composite-based or poly-L-lactic acid (PLLA)/hydroxyapatite (HA) composite-based absorbable plates and screws. Clinical courses were confirmed and comparisons were conducted based on direct observation. Results: There were no naturally occurring foreign body reactions. Post-traumatic inflammatory responses occurred in eight patients (nine cases), in which six recovered naturally with conservative treatment. The absorbable plates were removed from two patients. PLA/PGA compositebased absorbable plates degraded into fragments with non-uniform, sharp surfaces whereas PLLA/HA composite-based absorbable plates degraded into a soft powder. Conclusion: PLA/PGA composite-based and PLLA/HA composite-based absorbable plates showed no naturally occurring foreign body reactions and showed different degradation patterns. The absorbable plate used for facial bone fracture surgery needs to be selected in consideration of its degradation patterns.

• 한국강구조학회 논문집
• /
• 제17권5호통권78호
• /
• pp.593-604
• /
• 2005

본 논문에서는 개단면 리브를 갖는 보강판에 대하여 직교이방성 강성비를 매개변수로 하여, 집중하중이 작용하는 경우 발생하는 보강판의 국부 처짐 및 국부 모멘트에 대한 연구를 수행하였다. 보강판의 국부 거동을 파악하기 위하여 리브 사이에 위치한 판의 중앙점에 하중이 작용하는 경우를 고려하였으며, 전체적인 거동을 산정하기 위하여, 판의 중앙에 위치한 리브 위에 하중이 작용하는 경우를 해석하였다. 여러 가지 보강판에 대한 국부 거동을 분석한 결과, 국부 모멘트의 증가 비율은 리브 간격과 상관없이 리브 크기에 따라 일정함을 알 수 있었으며, 또한, 보강판의 전체 처짐에 대한 국부 처짐의 비율은 리브 간격과 강성비의 함수로 표현할 수 있음을 알 수 있었다. 이러한 관계식을 예제에 적용한 결과, 실제 국부 처짐이 발생하는 경우와 상당한 정확도를 나타내었으며, 또한 직교이방성 판 해석에 적용한 결과, 상당한 정확도의 증가를 나타내었다. 따라서, 본 연구에서 제안한 함수식을 이용하면, 개단면 리브를 갖는 보강판의 전체 거동으로부터 간편하게 국부 거동 결과를 예측할 수 있을 것으로 판단된다.

• 한국강구조학회 논문집
• /
• 제14권4호
• /
• pp.529-538
• /
• 2002

최근, 경제적 이점과 전단강도의 증가효과로 인하여, 파형판의 사용이 증가하고 있다. 하지만, 일반적인 평판에 대해서는 현재거의 모든 시방서에 설계기준이 제시되어 있으나, 파형판의 전단강도에 대한 규정은 제시되지 않은 실정이다. 따라서 설계자가 파형판을 설계할 수 있도록 참고할 수 있는 규정이 필요하다 할 수 있다. 본 연구에서는 수치해석 방법에 의해 파형판의 여러기하 조건에 따른 전단강도의 관계를 알아보았으며, 수치해석에는 8절점 박판 쉘요소를 사용했다. 수치해석을 통하여 파형판에 있어서 파형의 크기, 곡률, 파형판의 두께에 따라 전단강도를 결정할 수 있는 식을 제안하였으며, 제안식은 파형판이 일반적인 평판에 비해 상당히 큰 전단강도를 갖는다는 것을 보여준다.

• Structural Engineering and Mechanics
• /
• 제44권6호
• /
• pp.735-751
• /
• 2012

Although being one of the most popular strengthening techniques in reinforced concrete beams, the use of steel plates bonded to the soffit raises problems of ductility. This study aims at investigating the influence of the use of perforated steel plates instead of solid steel plates on the ductility of reinforced concrete beams. A total of nine reinforced concrete beams were tested. In addition to an unplated beam, eight beams with perforated steel plates of two different thicknesses (3 mm and 6 mm) were subjected to monotonic loading. Effect of bonding the plates to the beams with anchor bolts and with additional side plates bonded to the sides of the beam with and without anchors is also investigated. The use of bolts in addition to epoxy was found to greatly contribute to the ductility and energy absorption capacity of the beams, particularly in specimens with thick plates (6 mm) and the use side plates in addition to the bottom plate was found to be ineffective in increasing the ductility of a concrete beam unless the side plates are attached to the beam with anchors bolts. The thickness of the plate was found to have little effect on the bending rigidity of the beam.