• ETRI Journal
• /
• v.28 no.5
• /
• pp.656-659
• /
• 2006

This letter presents a new polarizer which has a simple comb structure inside a circular waveguide. The electrical performance of the proposed comb polarizer is optimized by a circular waveguide radius and by the physical parameters of the comb plates. This polarizer is suitable for providing good performance in millimeter-band application because of its simple structure and low fabrication cost. In our experiments the dual-band comb polarizer designed in band 1(K) and band 2(Ka) showed good electrical performance without any tuning elements.

• Journal of Astronomy and Space Sciences
• /
• v.26 no.3
• /
• pp.345-354
• /
• 2009

A stepped septum polarizer has been designed and fabricated for the 43 GHz band KVN receiver system. The dual-circular polarizer converts left and right hand circularly polarized signals into linear polarizations in two separated rectangular waveguides. Measurements show that the performance of the designed septum polarizer covering 42-48 GHz frequency band is adequate to meet the requirement of KVN receivers. Especially, a polarizer for the KVN receiver of 85-95 GHz frequency band can be fabricated by scaling the dimensions of the septum polarizer developed in this paper.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.383-384
• /
• 2010

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.661-663
• /
• 2009

This paper describes a fabrication method for high transmittance panel using newly designed polarizer and liquid crystal with a high dielectric anisotropy (${\Delta}{\varepsilon}$). To enhance the transmittance of the panel without contrast ratio reduction, new polarizer with high transmittance and high ${\Delta}{\varepsilon}$ liquid crystal were used. The transmittance of the liquid crystal display (LCD) panel employed by a new polarizer was increased by 6% over that of the panel with a conventional polarizer and liquid crystal in LCD industry.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.1
• /
• pp.63-67
• /
• 2015

In this study, we demonstrate the change of optical characteristic by thickness of metal deposition on nano metal grid polarizer film fabrication. Nano metal grid polarizer film consists of aluminium grid polarizer layer on PET (Polyethylene phthalate) substrate. We aim at metal grid layer formation for the large nano wire grid polarizer fabrication. we draw process conditions of the nano metal grid polarizer film fabrication to improve transmittance and extinction ratio and Nano wire grid polarizer film (NWGP) film is fabricated with 140 nm pitch, 70 nm width, and 70 nm depth of metal grid on optimum design conditions. As a result, we get high optical properties of nano wire grid polarizer which is the maximum transmittance of 80% and the extinction ratio of $10^6$ at 600 nm wavelength respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.293-296
• /
• 2007

Gamma curve is one of the most important optical performance characteristics of a liquid crystal display. we present investigations on the relationship between gamma and polarizer. The gamma curve is affected by the angle of the polarizer absorption axis. When the crossed angle between the two polarizers turns larger, gamma values will decrease. The gamma variation caused from each polarizer variation could be improved by monitoring and controlling the axial direction of the polarizers.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.443-446
• /
• 2002

In this paper, we present a new design method for a square iris polarizer to be used in dual-band (Ka-band; 20.8 ~21.2 ㎓, 30.6~31 ㎓) antenna feeds. Principles of operation of a square iris polarizer, its design concepts and methods are proposed. Based on proposed methods, a Ka- band polarizer with -35 dB return loss and 0.3 dB axial ratio is designed using the commercial software HFSS.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.687-690
• /
• 2006

Influence of polarizer with different haze value on the optical properties of TFT-LCD TV has been investigated. According to the results, a optimum optical performance can be achieved by using the polarizer with proper haze value.

• Journal of electromagnetic engineering and science
• /
• v.2 no.2
• /
• pp.128-131
• /
• 2002

A circular polarizer structure of a reflection type, which consists of two sheets of photoetched diople array, is investigated theoretically and experimentally.

• Journal of Information Display
• /
• v.9 no.4
• /
• pp.11-14
• /
• 2008

A highly efficient organic light-emitting diode (OLED) with an in-cell polarizer made of an imprinted liquid crystalline polymer (LCP) layer doped with dichroic dye molecules is presented. The in-cell polarizer was found to be capable of effectively polarizing the emission light of the OLED and of significantly improving the luminance through the periodic microstructures fabricated using an imprinting method. This type of OLED with an imprinted in-cell polarizer is useful for efficient light source applications in liquid crystal displays (LCDs).