• ETRI Journal
• /
• 제28권5호
• /
• pp.656-659
• /
• 2006

This letter presents a new polarizer which has a simple comb structure inside a circular waveguide. The electrical performance of the proposed comb polarizer is optimized by a circular waveguide radius and by the physical parameters of the comb plates. This polarizer is suitable for providing good performance in millimeter-band application because of its simple structure and low fabrication cost. In our experiments the dual-band comb polarizer designed in band 1(K) and band 2(Ka) showed good electrical performance without any tuning elements.

• Journal of Astronomy and Space Sciences
• /
• 제26권3호
• /
• pp.345-354
• /
• 2009

A stepped septum polarizer has been designed and fabricated for the 43 GHz band KVN receiver system. The dual-circular polarizer converts left and right hand circularly polarized signals into linear polarizations in two separated rectangular waveguides. Measurements show that the performance of the designed septum polarizer covering 42-48 GHz frequency band is adequate to meet the requirement of KVN receivers. Especially, a polarizer for the KVN receiver of 85-95 GHz frequency band can be fabricated by scaling the dimensions of the septum polarizer developed in this paper.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.383-384
• /
• 2010

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.661-663
• /
• 2009

This paper describes a fabrication method for high transmittance panel using newly designed polarizer and liquid crystal with a high dielectric anisotropy (${\Delta}{\varepsilon}$). To enhance the transmittance of the panel without contrast ratio reduction, new polarizer with high transmittance and high ${\Delta}{\varepsilon}$ liquid crystal were used. The transmittance of the liquid crystal display (LCD) panel employed by a new polarizer was increased by 6% over that of the panel with a conventional polarizer and liquid crystal in LCD industry.

• 마이크로전자및패키징학회지
• /
• 제22권1호
• /
• pp.63-67
• /
• 2015

본 연구에서는 대면적 나노 금속 격자형 편광 필름 제작에서 증착 두께에 따른 광 특성 연구를 수행하였다. 나노 금속 격자형 편광필름은 PET(Polyethylene phthalate)기판 위에 알루미늄 선 격자 구조로 구성된다. 본 연구에서는 대면적 편광필름 제작을 위한 증착공정을 통한 금속 격자 형성을 목표로 하였으며, 금속 격자형 편광 필름 제작에 있어 최적의 투과율과 소광비를 가지는 금속 박막 형성 조건을 도출하였다. 최적화 공정에 의해 나노 금속 격자형 편광필름은 140 nm 주기, 70 nm 선폭, 70 nm의 금속층 높이를 가지는 금속 격자 구조로 제작 되었다. 분석결과 600 nm 파장에서 80% 이상의 최고 투과율 및 $10^6$ 이상의 소광비를 가지는 나노 금속 격자 편광필름의 높은 광 특성을 확인하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.293-296
• /
• 2007

Gamma curve is one of the most important optical performance characteristics of a liquid crystal display. we present investigations on the relationship between gamma and polarizer. The gamma curve is affected by the angle of the polarizer absorption axis. When the crossed angle between the two polarizers turns larger, gamma values will decrease. The gamma variation caused from each polarizer variation could be improved by monitoring and controlling the axial direction of the polarizers.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
• /
• pp.443-446
• /
• 2002

In this paper, we present a new design method for a square iris polarizer to be used in dual-band (Ka-band; 20.8 ~21.2 ㎓, 30.6~31 ㎓) antenna feeds. Principles of operation of a square iris polarizer, its design concepts and methods are proposed. Based on proposed methods, a Ka- band polarizer with -35 dB return loss and 0.3 dB axial ratio is designed using the commercial software HFSS.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.687-690
• /
• 2006

Influence of polarizer with different haze value on the optical properties of TFT-LCD TV has been investigated. According to the results, a optimum optical performance can be achieved by using the polarizer with proper haze value.

• Journal of electromagnetic engineering and science
• /
• 제2권2호
• /
• pp.128-131
• /
• 2002

A circular polarizer structure of a reflection type, which consists of two sheets of photoetched diople array, is investigated theoretically and experimentally.

• Journal of Information Display
• /
• 제9권4호
• /
• pp.11-14
• /
• 2008

A highly efficient organic light-emitting diode (OLED) with an in-cell polarizer made of an imprinted liquid crystalline polymer (LCP) layer doped with dichroic dye molecules is presented. The in-cell polarizer was found to be capable of effectively polarizing the emission light of the OLED and of significantly improving the luminance through the periodic microstructures fabricated using an imprinting method. This type of OLED with an imprinted in-cell polarizer is useful for efficient light source applications in liquid crystal displays (LCDs).