• Polymer(Korea)
• /
• v.29 no.5
• /
• pp.493-500
• /
• 2005

Polyhydroxyamides(PHAs) having poly(ethylene glycol)methyl ether (MPEG) and/or dimethylphenoxy pendant groups were synthesized by solution polycondensation at low temperature. The inherent viscosities of the PHAs measured at $35^{\circ}C$ in DMAC or DMAc/LiCl solution were in the range of $0.51\~2.31dL/g$. This precursor polymers were studied by FT-IR, $1H-NMR$, DSC, and TGA. Solubility of the precursors with higher MPEG unit was increased, especially the polymer having MPEG $(M_n=1100)$ was soluble or partially soluble in ethanol, methanol, and water as well as aprotic solvents, but the PBOs were nearly insoluble in a variety of solvents. PHAs were converted to polybenzoxazoles (PBOs) by thermal cyclization reaction with heat of endotherm. In case of the precursors having MPEG nit, the precursor polymers with a higher $M_n$ were fully cyclized at a lower temperature than one with a lower $M_n$.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.7
• /
• pp.1029-1031
• /
• 2003

• Elastomers and Composites
• /
• v.43 no.4
• /
• pp.271-280
• /
• 2008

Aromatic polyhydroxyamides (PHAs) having bulky groups and ether linkages in the polymer main chain were synthesized by the low temperature solution polycondensation reaction. FT-IR, $^{1}H-NMR$, DSC, and TGA were used to study the properties of these polymers. The PHAs were converted into polybenzoxazoles (PBOs) by a thermal cyclization reaction, and endothermic peaks were observed in the range of $220{\sim}400^{\circ}C$. The introduction of the ether and bulky groups in the main chain improved the solubility of the PHAs in aprotic solvents such as DMSO and DMF, but the PBOs were nearly insoluble in common solvents. All the PBOs, except for PBO 5 with 2,6-dimethylphenoxy pendant and 2,3-dihydroxyquinoxaline ring, and PBO 6 with 2,6-dimethylphenoxy pendant and 2,3-dihydroxyquinoxaline ring, exhibited $T_g's$ in the range from 149 to $217^{\circ}C$ by DSC. The thermogravimetric analyses indicated that most of the PBOs were thermally stable up to $400^{\circ}C$ in nitrogen. Maximum weight loss temperatures of PHA 5 and PBO 5 with 2,6-dimethylphenoxy pendant and 2,3-dihydroxyquinoxaline ring were $707^{\circ}C$ and $683^{\circ}C$, respectively, which were the hightest temperatures among the corresponding copolymers. The PBOs in nitrogen exhibited relatively high char yields in the range of $63{\sim}70%$ at $900^{\circ}C$.

• Elastomers and Composites
• /
• v.42 no.4
• /
• pp.238-248
• /
• 2007

A series of polyhydroxyamides(PHAs) having ether linkages in the polymer backbone were prepared via solution polycondensation at low temperature. These polymers were studied by FT-IR, $^1H-NMR$, DSC, TGA and PCFC. The PHAs exhibited inherent viscosities in the range of $0.5{\sim}1.1dL/g\;at\;35^{\circ}C$ in DMAc solution. Most of PHAs except PHA 3 were soluble in polar organic solvents such as N,N-dimethylacetamide(DMAc), N-methyl-2-pyrrolidone(NMP), and N,N-dimethylform-amide(DMF). Subsequent thermal treatment of PHAs afforded polybenzoxazols(PBOs). However, the PBOs were insoluble in a variety of solvents. Most of the PBOs except PBO 3 showed glass-transition temperature($T_g$) in the range of $200{\sim}246^{\circ}C$ by DSC and maximum weight loss temperature in the range of $597{\sim}697^{\circ}C$ in nitrogen by TGA. PBOs showed high char yields in the range of $51{\sim}64%$. PCFC results of the PBOs showed the heat release(HR) capacity, $8{\sim}65J/gK$ and total heat release(total HR), $2.4{\sim}4.7kJ/g$.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.347-350
• /
• 2002

Wholly aromatic polybenzoxazoles(PBO) are well established as high performance materials with excellent thermal stability and mechanical properties. Heterocyclic precursor polymers such as polyhydroxyamides(PHA) have been interested in the field of high performance flame retardant polymers.[1] Precusor polymers have the advantages that they are easier to process, don't require strong solvents and can adsorb large amounts of heat energy during the cyclization process. (omitted)

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.37-40
• /
• 1998

Aromatic polybenzoxazoles have been known since 1964 as a class of aromatic heterocyclic polymers that exhibit excellent thermal stability. Polyhydroxyamides (PHA), precursor polymers to PBO, can cyclize to farm stable heterocyclic polymers with the simultaneous release of small molecules, which can be expected to act as a fire quencher. (omitted)

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.41-44
• /
• 1998

Wholly aromatic polybenzoxazoles (PBO) are well established as high performance materials with excellent thermal stability and mechanical properties. Heterocyclic precursor polymers such as polyhydroxyamides (PHA) have been interested in the field of high performance flame retardant polymers. The PHAs can be converted to PBOs when ignited. (omitted)

• Fibers and Polymers
• /
• v.3 no.3
• /
• pp.91-96
• /
• 2002

Polyhydroxyamides derivatized with trifluorormethyl ether and trifluoromethyl ester groups were investigated as possible candidates for a new flame retardant polymer. Model compounds for these derivatized polyhydroxyamides were synthesized and their cyclization chemistry was investigated. The model compound study revealed that trifluorornethyl ester group containing model compounds can cyclize on heating, while trifluoromethyl ether group containing model compounds cannot. The non-fluorinated ether and ether derivatives behaved similarly. The trifluoromethyl ester derivatized polyhydroxyamides were synthesized according to the procedures for the model compounds. TGA characterization revealed that the fluorinated polymers have nearly same thermal stability as the underivatized PHA after cyclization.

• Macromolecular Research
• /
• v.16 no.5
• /
• pp.385-395
• /
• 2008

Synthesis and properties of novel excited-state intramolecular proton transfer (ESIPT) materials, recently developed in our group, are described. Highly efficient ESIPT reaction, achieved in polyquinolines, polybenzoxazoles, and oxadiazole and imidazole derivatives possessing an intramolecular tautomerizable hydrogen bond, has been investigated theoretically and experimentally. It is demonstrated that unique properties arising from the ESIPT process (large Stokes' shift, no self-absorption, and easy population inversion, etc.) make it possible to produce advanced polymer devices for lasing, optical storage, and electroluminescence.

• Elastomers and Composites
• /
• v.46 no.4
• /
• pp.295-303
• /
• 2011

A series of new aromatic polyhydroxyamides (PHAs) containing imide ring were prepared by direct polycondensation reaction of imide-diacids and two types of bis(o-aminophenol)s including 3,3'-dihydroxybenzidine and 2,2-bis(3-amino-4-hydroxyphenyl)hexafluoropropane. The polymers were characterized by FT-IR, FT-NMR, DSC and TGA. The inherent viscosities of the PHAs measured at $35^{\circ}C$ in DMAC solution were in the range of 0.49-1.13 dL/g. PHA 2 and 3, except PHA 1, were soluble in polar solvents such as DMAc, DMF and NMP. PHA 4, 5, and 6 containing 6F group showed a higher solubility in less polar solvents. But the polybenzoxazoles (PBOs,) were insoluble in a variety of solvents except partially soluble in sulfuric acid. The PBO 1, 2 and 3 showed maximum weight loss temperature in the range of $650-656^{\circ}C$ and relatively high char yields in the range of 57.4-61.9 % under a nitrogen atmosphere. These results suggested that the introduction of imide or diimide ring in the main chain was effective in improving the thermal stability of PHAs and PBOs.