• Journal of Adhesion and Interface
• /
• v.23 no.1
• /
• pp.8-16
• /
• 2022

In this study, self-healable waterborne polyurethane (SH-WPU) as shoes and coating materials with self-healable disulfide functionalities was synthesized by mixing polyether polyol to impart excellent durability and heat resistance and polycarbonate polyol to impart excellent mechanical properties. The synthesized SH-WPU was characterized by fourier transform-infrared spectroscopy (FT-IR), and physical and self-healing properties were confirmed through universal testing machine (UTM) and scanning electron microscope (SEM) measurements. Tensile strength and hardness were increased and elongation was decreased by using polycarbonate polyol. In addition, as a result of comparison of thermal properties, thermal stability has been increased as the content of polycarbonate polyol increased. The healing efficiency showed the highest efficiency when poly(tetramethylene ether)glycol : polycarbonate polyol = 0.75 : 0.25, and it was confirmed that the damaged part was healed through surface observation using a microscope and SEM.

• Clean Technology
• /
• v.25 no.2
• /
• pp.114-122
• /
• 2019

The synthesis of bio polyol from renewable resources has attracted attention in recent years. In particular, it is important to take advantage of bio polyols in the synthesis of polymers. In this study, a series of dimethylformamide (DMF) based polyurethanes were synthesized using polycarbonate polyol/bio polyol (PO3G: polytrimethylene ether glycol prepared from 1, 3-propanediol produced by fermentation from corn sugar), methylene diphenyl diisocyanate (MDI) and 1,4-butandiol (BD). The properties of prepared polyurethane films and the cell structure of wet type artificial leather were investigated. As the bio polyol content increased, the tensile strength of polyurethane films decreased, however, the elongation at break increased significantly. As a result of thermal characteristics analysis, the glass transition temperature of polyurethanes increased when increasing the content of polycarbonate polyol. As a result of comparing the cell characteristics of wet type artificial leathers prepared in this study, it was found that the number and uniformity of cells formed in the artificial leather samples increased when increasing the content of polycarbonate polyol in polycarbonate polyol/bio polyol. From these results, it was found that DMF-based polyurethane containing an appropriate amount of bio polyol could be used for wet type artificial leather. The bio textile analysis system according to ASTM standard was used to measure the bio carbon content of polyurethane. The content of bio carbon increased proportionally with the increase of bio polyol content used in polyurethane synthesis.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.2
• /
• pp.187-192
• /
• 2016

Chemical utilization of $CO_2$ is recognized as the technology for the reduction of greenhouse gas as well as the use of carbon to resources. Although various chemicals are commercially produced, the innovative development is still necessary to utilize large quantity of $CO_2$. In this report, the current status of technology to preserve -CO-O- linkage into the molecules was introduced, particularly for the synthesis of dimethyl carbonate (DMC) and polyols, which are raw materials of polycarbonate and polyurethane, respectively. RIST developed the novel process for the DMC production via urea methanolysis and the new catalytic system for polyol synthesis. Because of high contents of $CO_2$ in both chemicals, it is expected that they are able to contribute for the reduction of greenhouse gas.

• Journal of Adhesion and Interface
• /
• v.22 no.2
• /
• pp.39-46
• /
• 2021

Waterborne polyurethanes (WPU) was synthesized using polyester polyol and polycarbonate polyol containing 3-Methyl-1,5-pentanediol (MPD) in a branched structure. To compare physical properties, WPUs were synthesized using polyester polyol obtained from 1,4-butanediol (BD) and adipic acid and polycarbonate polyol obtained from 1,6-hexane diol (HD)/ 1,4-butanediol (BD). This study investigated the effect of polyol molecular structure (molecular structure in soft segments) on the physical properties of WPUs. In the case of WPUs synthesized using polyols containing MPD, 100% modulus and tensile strength were lower than that without MPD, and elongation was higher. The transparency of WPU films with MPD were slightly better than WPU films without MPD.

• Elastomers and Composites
• /
• v.55 no.1
• /
• pp.20-25
• /
• 2020

The effect of the isocyanate index (NCO index) on the particle size and particle size distribution of a waterborne polyurethane dispersion (WPUD) with polycarbonate-diol was determined. The WPUDs were prepared using a conventional acetone process with polycarbonate-polyol (M_n = 2028), 4,4'-methylenebis(cyclohexyl isocyanate) (H₁₂MDI), 2,2-bis(hydroxymethyl) propionic acid (DMPA), and dibutyltin dilaurate catalyst. At NCO index values below 1.5, the number average particle diameter of the WPUDs significantly increased with the NCO index, whereas the particle diameter slightly varied at higher NCO indexes. The dependency of the WPUD viscosity on the NCO index exhibited similar behavior to that of the particle size. The relative values of the full width at half maximum of the WPUD particle distribution curves at various NCO indexes were not influenced by the NCO index.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.4
• /
• pp.628-634
• /
• 2014

In this study, a new paint which is able to resist the cavitation erosion is tried to be developed by using urethane added with polyol such as poly propylene glycol(PPG), poly carbonate diol(PCD), polycaprolactone polyol (PCL-1), and poly caprolactone-tetramethylene gylcolether polyol(PCL-2). The new paint synthesized by adding polyol was characterized with physical properties and resistivity to cavitation erosion. Among polyol, the prepolymer added with PCD showed high hardness and wear resistance. However, due to too high in viscosity, the prepolymer added with PCL-1 was selected as a paint. The paint added with PCL-1 showed high resistivity to cavitation erosion and its surface was monitored by using Scanning Electron Microscope.

• Clean Technology
• /
• v.24 no.3
• /
• pp.190-197
• /
• 2018

Various waterborne polyurethanes (WPU) with three different types of polyol such as ester type polyol [adipic acid (A)/BD/3-methyl-1,5-pentandiol (MPD) and A/BD]//carbonate type polyol (C/HD/MPD, C/HD, C/BD)//ether type polyol (PTMG) were prepared in this study. This study focused on the effect of polyol type on the properties of WPU. Soft segment Tg (Tgs), 100% elastic modulus and tensile strength were highest when using carbonate polyol, followed by ester polyol and ether polyol, while those of elongation showed the opposite trend. The WPU synthesized with MPD - containing polyol showed lower Tgs, 100% elasticity and strength, and higher elongation than MPD - free WPU. The % transmittance and transparency of the WPU film containing the MPD component was superior to that of the WPU film containing no MPD component, and it was found that the film based on carbonate polyol was slightly better than the film based on ester polyol and ether polyol.

• Journal of Adhesion and Interface
• /
• v.12 no.2
• /
• pp.47-55
• /
• 2011

UV-curable coatings have been used in various industries due to their advantages such as high mechanical property, good solvent resistance, fast curing process and low volatile organic compounds. However, a lack of flexibility of UV-cured films is a weak point for the pre-coated system of roll-to-roll process. In this study, UV-curable polycarbonate-based methacrylates were synthesized with polycarbonate diol, isophorone diisocyanate and 2-hydroxyethylmethacrylate to improve flexibility of the UC-cured films. The effects of polyol molecular weight, content of photoinitiator and monomers on the UV-curing behavior, flexibility and properties were investigated. The UV-curing behavior was measured by a photo-DSC, the pendulum hardness, tensile strength, viscoelastic properties were also evaluated.

• Applied Chemistry for Engineering
• /
• v.1 no.1
• /
• pp.52-62
• /
• 1990

Cationic polycarbonate type polyurethane was prepared from the quaternization reaction of N-methyldiethanolamine(MDEA) in urethane backbone which was obtained from the reaction of polycarbonate polyol, MDI and MDEA(chain exetender). Tensile strength and modulus of the cationic urethane resins were increased sharply with increasing the ionic content in urethane backbone. But hydrolysis resistance was decreased with increasing ionic contents. The selectivity of the cationic polycabonate urethane membrane for water/ethanol separation by pervaporation was about 20. The carrier mediated transport mechanism was considered the most probable separation mechanism for these membranes.

• Journal of Adhesion and Interface
• /
• v.23 no.4
• /
• pp.137-143
• /
• 2022

In this study, the polyurethane acrylates (PUA) resin with good adhesive and flexibility for adhesive for shoes and clothing were synthesized using that poly(tetramethylene adiphate glycol) (PTAd), poly(tetramethylene ether glycol) (PTMG) as polyester polyol and polyether polyol respectively, including 4,4'-methylene diphenyl diisocyanate (MDI), isophorone diisocyanate (IPDI), 1,4-butandiol (1,4-BD), 2-hydroxyethyl methacrylate (2-HEMA) and dibutyl amine (DBA). The effect of polyol blend in the polyurethane acrylate on thermal and mechanical properties, adhesion strength and flexural strength were studied. The glass transition temperature (T_g) of PUA was confirmed in range of -70~-40 ℃. In addition, the glass transition temperature (T_g), decomposition temperature (T_d), tensile strength adhesion strength and heat resistance were increased as increasing of PTAd amount while the elongation, water resistance and flexural properties were decreased. The synthesized polyurethane acrylate with 5:5 ratio of PTAd and PTMG indicated the highest adhesion strength and flexural properties.