• Korean journal of applied entomology
• /
• v.23 no.4 s.61
• /
• pp.242-246
• /
• 1984

Results obtained from the experiment conducted to find out e relationships between tuber decay, and water potential and bruising in or on the tubers, are summerized as follows ; 1) When potato tubers were bruised or injected with bacterial inoculum, the tubers with high water potential rotted more easily than the tubers with low potential. A big difference in the development of decay between high and low water potential tubers was found. 2) In tubers injected with different levels of inoculum. high water potential tubers were more susceptible to soft rot than low water potential tubers. 3) $ED_{50}$ of inoculum concentration was 8.5(log) at high water potential tubers and 9.8(log) at low water potential. A small difference between low and high water potential was detected. The results of this experiment show that potatoes should be handled carefully and must be dried after harvest to reduce decay development in shipment and storage.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1987.05a
• /
• pp.7.2-7
• /
• 1987

Waver 와 Bray (1930) 가 cochlear microphonic을 처음 발견한 이래 Derbyshire 와 Davis (1935)는 summating potential을 각각 처음 기술하여 이 세가지 전위를 electrocochleogram 이라 칭하였고 이는 감음신경성 난청의 감별진단 및 청각생리연구에 이용되어 왔다. 저자들은 정상 guinea pig 10 마리를 대상으로 DANAC 7E ERA청각계기를 사용하여 정원창에서 action potential과 summating potential을 측정하였으며 주파수에 따른 역치 자극간 간격 및 두 potential의 상호관계를 분석하여 다음과 같은 결과를 얻었다. 1) 주파수가 증가함에 따라 그 역치는 점차 감소하였다. 2) 자극음의 강도와 action potential의 $N_1$ component 진폭은 상호 비례관계를 보여 주었으며 주파수 증가에 따라 $N_1$ component 진폭은 점차 증가하였다. 3) Action potential 의 $N_1$ component latency는 주파수가 증가할수록 역비례 관계를 보여 주었다. 4) N$_1$ component의 진폭과 자극간 간격(interstimulus interval, ISI)과의 관계는 ISI가 80~160m sec사이에서 plateau를 형성하였다. 5) summating potential은 자극음의 강도가 증가함에 따라 그 진폭이 증가하였으며 action potential도 증가하였으나, SP/AP는 감소하는 경향을 보였다.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.5 no.4
• /
• pp.339-346
• /
• 2005

Artificial potential field (APF) is a widely used method for local path planning of autonomous mobile robot. So far, many different types of APF have been implemented. Once the artificial potential functions are selected, how to choose appropriate parameters of the functions is also an important work. In this paper, a detailed analysis is given on how to choose proper parameters of artificial functions to eliminate free path local minima and avoid collision between robots and obstacles. Two kinds of potential functions: Gaussian type and Quadratic type of potential functions are used to solve the above local minima problem respectively. To avoid local minima occurred in realistic situations such as 1) a case that the potential of the goal is affected excessively by potential of the obstacle, 2) a case that the potential of the obstacle is affected excessively by potential of the goal, the design guidelines for selecting appropriate parameters of potential functions are proposed.

• Geomechanics and Engineering
• /
• v.7 no.6
• /
• pp.589-612
• /
• 2014

This study includes determination of liquefaction potential in Erzincan city center. Erzincan Province is situated within first-degree earthquake zone on earthquake map of Turkey. In this context, the earthquake scenarios were produced using the empirical expressions. Liquefaction potential for different earthquake magnitudes (6.0, 6.5, 7.0) were determined. Liquefaction potential was investigated using Standard Penetration Test (SPT). Liquefaction potential analyses are determined in two steps: geotechnical investigations and calculations. In the first steps, boreholes were drilled to obtain disturbed and undisturbed soil samples and SPT values were obtained. Laboratory tests were made to identify geotechnical properties of soil samples. In the second step, liquefaction potential analyses were examined using two methods, namely Seed and Idriss (1971), Iwasaki et al. (1981). The liquefaction potential broadly classified into three categories, namely non-liquefiable, marginally liquefiable and liquefiable regions. Additionally, the liquefaction potential index classified into four categories, namely non-liquefiable, low, high and very high liquefiable regions. In order to liquefaction analysis complete within a short time, MATLAB program were prepared. Following the analyses, liquefaction potential index is investigated by Iwasaki et al. (1982) methods. At the final stage of this study, liquefaction potential maps and liquefaction potential index maps of the all study area by using IDW (inverse distance weighted) interpolation method in Geostatistical Analyst Module of ArcGIS 10.0 Software were prepared for different earthquake magnitudes and different depths. The results of soil liquefaction potential were evaluated in ArcGIS to map the distributions of drillings with liquefaction potential. The maps showed that there is a spatial variability in the results obtained which made it difficult to clearly separate between regional areas of high or low potential to liquefy. However, this study indicates that the presence of ground water and sandy-silty soils increases the liquefaction potential with the seismic features of the region.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.1
• /
• pp.15-19
• /
• 2009

This paper presents the potential field for mobile robot path planning. The proposed repulsive potential has weighted parts, which consists of conventional repulsive potential and goals nonreachable with obstacles nearby repulsive potential. It ensures the global minimum of the total potential when the robot approaches goals near obstacle and the robot passes the adjacent obstacles. Simulation results shows that the proposed potential is better than conventional potentials.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.9
• /
• pp.945-947
• /
• 2001

The He-Xe interaction potential has been determined using a direct inversion of the experimentally reduced-viscosity collision integrals obtained from the corresponding states correlation. The potential is in a good agreement with the previously determined potential. The potential predicts viscosity and diffusion coefficients and they are found to be in a good agreement with experiment.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.238-240
• /
• 2007

This paper present adaptation method of rail potential test to verify DC railway system's performance and safety. For protection of person and utility caused by rail potential rise, international standard to limit rail potential rise is made and rail potential is tested at the time of plan and construction of DC railway system in foreign country. So, we need rail potential test at the opening time and prepare a continuous monitoring technique of rail potential and a limitation method of rail potential rise. For these, we describe cause of rail potential rise, international standard about rail potential, protection principle, an example of calculation and measurement, and adaptation method for performance test.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.12
• /
• pp.88-93
• /
• 2011

When the ground current is injected into the adjacent ground electrode, the potential interference is caused between ground electrodes, the ground potential interferences have been largely studied with power frequency fault currents. Many attempts to find the frequency-dependent grounding impedance report that the high frequency grounding impedance is very different with the ground resistance. This paper presents experimental data on the frequency-dependent potential interference effects in the vicinity of ground rod. The ground potential rises around the test ground rod of 4 or 6[m] were measured and discussed. As a result, the ground potential rises and potential interference factor are decreased with decreasing the grounding impedance. It was found that the lowering of grounding impedance is critical to reduce the ground potential interference effects.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.5
• /
• pp.531-537
• /
• 1999

This paper presents the evaluaton procedures and the estimation model for DSM potential on commercial sector in Korea. In general, the evaluation process of the potential savings for DSM measures or programs consists of baseline electricity consumption forecast and potential evaluation such as technical potential(TP), economic potnetial(EP), and achievable potential(AP). A library of energy conservation measures applicable to each end-use or apparatus is developed, and energy savings and other factors are applied to the baseline demand estimates of consumption to produce potential savings estimates. The purpose of this paper is to establish the evaluation process of those DSM potential for commercial sector. In case study, we applied it to commercial sector for horizon years by end-use.

• International Journal of Computer Science & Network Security
• /
• v.21 no.6
• /
• pp.54-60
• /
• 2021

Monte-Carlo GO is a computer GO program that is sufficiently competent without using knowledge expressions of IGO. Although it is computationally intensive, the computational complexity can be reduced by properly pruning the IGO game tree. Here, I achieve this by using a potential model based on the knowledge expressions of IGO. The potential model treats GO stones as potentials. A specific potential distribution on the GO board results from a unique arrangement of stones on the board. Pruning using the potential model categorizes legal moves into effective and ineffective moves in accordance with the potential threshold. Here, certain pruning strategies based on potentials and potential gradients are experimentally evaluated. For different-sized boards, including an official-sized board, the effects of pruning strategies are evaluated in terms of their robustness. I successfully demonstrate pruning using a potential model to reduce the computational complexity of GO as well as the robustness of this effect across different-sized boards.