• 제목/요약/키워드: power spectral density function

검색결과 131건 처리시간 0.029초

전력밀도함수를 이용한 노면형상 생성에 관한 연구 (Generation of Road Surface Profiles with a Power Spectral Density Function)

  • 김광석;유완석
    • 한국자동차공학회논문집
    • /
    • 제5권1호
    • /
    • pp.136-145
    • /
    • 1997
  • To analyzed ride quality and to predict durability in vehicle dynamics, it is essential to describe a road surface profile precisely. This paper presents a technique to generate road surface profiles in a spatial domain by using a power spectral density function. A single track power spectral density function is proposed to describe a road surface profile, which is also applicable for multi-track vehicle response analysis, The derived road surfaces are compared to ISO(International Organization for Standardization) standards and classifications, proposed by the MIRA(Motor Industry Research Association). The methodology in this paper is also proposed to generate road roughness description with a limited external data. A small amount of external curve data is combined with an internal PSD function to generate road surface roughness in a spatial domain.

  • PDF

도로교 내진설계 스펙트럼에 부합하는 표준 PSD함수의 제안 (A Proposal of Reference Power Spectral Density Functions Compatible with Highway Bridge Design Specta)

  • 최동호;이상훈;고정훈
    • 대한토목학회논문집
    • /
    • 제28권1A호
    • /
    • pp.59-67
    • /
    • 2008
  • 원전 구조물의 내진해석에서 사용하는 시간이력 함수는 적절한 하중을 보장하기 위하여 설계응답스펙트럼에 부합할 뿐만 아니라 최소 PSD함수 이상의 PSD함수를 갖도록 함으로서 각각의 진동수에서 일정 크기 이상의 에너지를 갖고 있어야 한다. 도로교 구조물에서도 구조물의 대형화와 정교화로 인한 구조물의 공공 기능의 안전성이 더욱 강조되어, 설계 목적의 PSD함수의 규정이 필요하지만 적절한 절차가 개발이 되지 않아 현실적으로 적용하기 어려운 실정이다. 본 연구에서는 다수의 인공지진을 이용하여 표준 PSD함수를 계산하는 절차를 제시하고 현재의 도로교 내진설계 스펙트럼에 부합하는 표준 PSD 함수를 제안하였다.

A structural model updating method using incomplete power spectral density function and modal data

  • Esfandiari, Akbar;Chaei, Maryam Ghareh;Rofooei, Fayaz R.
    • Structural Engineering and Mechanics
    • /
    • 제68권1호
    • /
    • pp.39-51
    • /
    • 2018
  • In this study, a frequency domain model updating method is presented using power spectral density (PSD) data. It uses the sensitivity of PSD function with respect to the unknown structural parameters through a decomposed form of transfer function. The stiffness parameters are captured with high accuracy through solving the sensitivity equations utilizing the least square approach. Using numerically noise polluted data, the model updating results of a truss model prove robustness of the method against measurement and mass modelling errors. Results prove the capabilities of the method for parameter estimation using highly noise polluted data of low ranges of excitation frequency.

Power spectrum density analysis for the influence of complete denture on the brain function of edentulous patients - pilot study

  • Perumal, Praveen;Chander, Gopi Naveen;Anitha, Kuttae Viswanathan;Reddy, Jetti Ramesh;Muthukumar, Balasubramanium
    • The Journal of Advanced Prosthodontics
    • /
    • 제8권3호
    • /
    • pp.187-193
    • /
    • 2016
  • PURPOSE. This pilot study was to find the influence of complete denture on the brain activity and cognitive function of edentulous patients measured through Electroencephalogram (EEG) signals. MATERIALS AND METHODS. The study recruited 20 patients aged from 50 to 60 years requiring complete dentures with inclusion and exclusion criteria. The brain function and cognitive function were analyzed with a mental state questionnaire and a 15-minute analysis of power spectral density of EEG alpha waves. The analysis included edentulous phase and post denture insertion adaptive phase, each done before and after chewing. The results obtained were statistically evaluated. RESULTS. Power Spectral Density (PSD) values increased from edentulous phase to post denture insertion adaption phase. The data were grouped as edentulous phase before chewing (EEG p1-0.0064), edentulous phase after chewing (EEG p2-0.0073), post denture insertion adaptive phase before chewing (EEG p3-0.0077), and post denture insertion adaptive phase after chewing (EEG p4-0.0096). The acquired values were statistically analyzed using paired t-test, which showed statistically significant results (P<.05). CONCLUSION. This pilot study showed functional improvement in brain function of edentulous patients with complete dentures rehabilitation.

Empirical formulations for evaluation of across-wind dynamic loads on rectangular tall buildings

  • Ha, Young-Cheol
    • Wind and Structures
    • /
    • 제16권6호
    • /
    • pp.603-616
    • /
    • 2013
  • This study is aimed at formulating an empirical equation for the across-wind fluctuating moment and spectral density coefficient, which are needed to estimate the across-wind dynamic responses of tall buildings, as a function of the side ratios of buildings. In order to estimate an empirical formula, wind tunnel tests were conducted on aero-elastic models of the rectangular prisms with various aspect and side ratios in turbulent boundary layer flows. In this paper, criteria for the across-wind fluctuating moment and spectral density are briefly discussed and the results are analyzed mainly as a function of the side ratios of the buildings. Finally, empirical formulas for the across-wind fluctuating moment coefficient and spectral density coefficient according to variation of the aspect ratio are proposed.

경부고속도로와 88고속도로에 대한 트럭수송시의 진동 특성 측정 및 분석 연구 (Measurements and Analysis of Truck Transport Vibration Characteristics on the Gyungbu and 88 Highway)

  • 박인식
    • 한국포장학회지
    • /
    • 제12권1호
    • /
    • pp.21-25
    • /
    • 2006
  • Measurements of accelerometer levels transmitted from the floor in commercials truck shipments were carried out transportation of 300 Kg-load from Gyungbu Highway(Waegouan-Seoul) to 88 Highway(Gwangju-Daegu). Different characteristics were observed the values measured the vibration levels with directions in the two Highway's as a function of road condition and truck speed. The results showed that the vibration levels of the Gyungbu Highway is much higher than those of the 88 Highway. A following analysis on the obtained values was used to get the acceleration spectral density (ASD) and power spectral density (PSD). For the entire transit route, the results showed that the level of vibration to vertical direction was significant effects for damaging the products carried compared to other directions such as longitudinal and transverse. This paper provides an updated history of measured characteristics of vibration levels for highways using mainly in domestic area.

  • PDF

Seismic design of structures using a modified non-stationary critical excitation

  • Ashtari, P.;Ghasemi, S.H.
    • Earthquakes and Structures
    • /
    • 제4권4호
    • /
    • pp.383-396
    • /
    • 2013
  • In earthquake engineering area, the critical excitation method is an approach to find the most severe earthquake subjected to the structure. However, given some earthquake constraints, such as intensity and power, the critical excitations have spectral density functions that often resonate with the first modes of the structure. This paper presents a non-stationary critical excitation that is capable of exciting the main modes of the structure using a non-uniform power spectral density (PSD) that is similar to natural earthquakes. Thus, this paper proposes a new method to estimate the power and intensity of earthquakes. Finally, a new method for the linear seismic design of structures using a modified non-stationary critical excitation is proposed.

개선된 선 스펙트럼 특성을 갖는 비이진 PPM 기반 초광대역 무선전송 시스템 (Ultra-Wide Bandwidth Systems Using a Non-Binary Pulse Position Modulation with Preferable Line Spectrum Properties)

  • 홍윤표;송홍엽
    • 한국통신학회논문지
    • /
    • 제31권6C호
    • /
    • pp.569-574
    • /
    • 2006
  • PPM(Pulse Position Modulation)을 기반으로 하는 초광대역(ultra-wide bandwidth) 무선전송 시스템의 일반적인 전력 밀도 함수(power spectral density function)를 유도한다. 또한 개선된 선 스펙트럼(line spectrum) 특성과 우수한 BER(Bit Error Rate) 성능을 갖는 초광대역 무선전송 시스템을 제안한다.

2중판 오리피스를 이용한 기액 2상유량계의 개발 (Development of a 9as-liquid two-phase flowmeter using double orifice plates)

  • 이상천;이상무;남상철
    • 설비공학논문집
    • /
    • 제10권5호
    • /
    • pp.619-629
    • /
    • 1998
  • An experimental work was conducted to investigate a feasibility of simultaneous measurement of gas-liquid two-phase flowrates with double orifice plates using air and water. The tests were carried out under the atmospheric pressure and at the ambient temperature using two different tube sizes. Qualities of an air-water flow in the present study have values less than 0.1 and thus the mixed flow showed bubbly, plug, slug flow regimes. The probability density function (PDF) and the power spectral density function (PSDF) of the instantaneous pressure drop traces for the flow regimes were obtained. It is found that some distinctive features exist in the distribution of these functions, depending upon the two-phase flow pattern. The time-averaged value of the instantaneous pressure drop increases with increasing gas and liquid flowrates, showing a single-valued function for the total mass flowrate and the quality. It is also found that the two-phase discharge coefficient exhibits a consistent trend for variation of dimensionless parameters such as the superficial velocity ratio and the gas Reynolds number. The results indicate that simultaneous measurement of two-phase flowrate may be possible based upon a statistical analysis of the instantaneous pressure drop curves monitored using double orifice plates.

  • PDF

노면 상관도를 고려한 3차원 노면형상 생성에 관한 연구 (Generation of Three Dimensional Road Surface Profiles with Considering Coherence Relation)

  • 김광석
    • 한국산학기술학회논문지
    • /
    • 제10권5호
    • /
    • pp.917-922
    • /
    • 2009
  • 본 연구에서는 ISO, MIRA, 그리고 Wong에 의해 제안된 노면 PSD 함수를 기초의 3차원 노면의 생성 방법에 대해 연구하였다. 주어진 노면 거칠기 특성이 PSD 함수를 사용하여 2차원 노면을 생성한 뒤 상관도를 고려하여 횡방향으로 연속적으로 배치함으로써 실제 노면 특성에 유사한 3차원 노면을 생성하였다. 생성된 노면의 상관도를 평가한 결과 실제 노면의 상관도 특성과도 잘 일치함을 확인하였다. 또한, 3차원 노면을 자동으로 생성하기 위하여 반복적으로 횡방향 노면을 생성시켜 주는 프로그램을 개발하였다.