• Journal of Forest and Environmental Science
• /
• v.35 no.4
• /
• pp.223-231
• /
• 2019

Castanopsis indica (Sil Batna) is an ecologically valuable multipurpose indigenous tree species of Bangladesh. Considering its high value but poor natural regeneration due to seed dormancy, the authors conducted an experiment at the Institute of Forestry and Environmental Sciences Chittagong University (IFESCU) during 2012-2013 to find out effective pre-sowing treatments. Ten pre-sowing seed treatments were applied on mature, even-sized seeds namely-control; sandpaper rubbing; nail clipping; immersion in normal water (at room temperature: 24℃) for 24 hrs., 48 hrs. and 72 hrs.; immersion in hot water (80℃) for 1 minute; soaking in 10% dilute H₂SO₄; soaking in 10% HCl for 5 minutes; and sowing in propagator house. Seeds sown after sandpaper rubbing at the distal end revealed best performances by providing highest germination percent (66.7%), germination energy (30%), germination index (0.17), germination rate (0.0145), germination value (30%) and plant percent (66.7%) within shortest period (38 days). The treatment also produced most vigor seedlings with 20.9 cm shoot height, 15 node number, and largest leaves (11.1 cm×2.9 cm). Hence, it is recommended to adopt sandpaper rubbing method for maximum germination and quality seedlings.

• Korean Journal of Food Science and Technology
• /
• v.39 no.3
• /
• pp.289-294
• /
• 2007

This study was performed to investigate the effects of pre-soaking methods on the preparation of Rehmannia radix Preparata (R.P). The R. radix L (R.L) was soaked in distilled water and traditional Korean wine for 24 hr, then the soaked R.L was treated with a traditional nine-time steaming process. Next, catalpol, 5-hydroxymethyl-2-furaldehyde (5-HMF), polyphenols, flavonoids, antioxidant activities, and ACE inhibition activity were analyzed for the R.P produced by the different methods. The catalpol content of the R.L was 631.4 ppm, but the content decreased as steaming increased to 8-9 times. The 5-HMF, polyphenol, and flavonoid contents of the R.L were 0.12 mg/g, 5.09 mg/g, and 0.83 mg/g, respectively, and these increased gradually with increasing steaming times. As the steaming times of the distilled soaking water increased, the antioxidant activities of 1 mg/mL increased from 19.44% to 75.60% at 14 times of steaming. The ACE inhibition activities of 1 mg/mL of the distilled soaking water increased from 28.70% to 94.78% at 10 times of steaming, but decreased afterward.

• Food Science and Preservation
• /
• v.11 no.1
• /
• pp.17-21
• /
• 2004

The antimicrobial effect of mixed solution of botanical antimicrobial agent-citrus product (BAAC) and such a natural additive as aloe, ginseng or Prunus mume extract on the spoilage microorganisms of soybean sprouts were investigated by paper disk method. The mixture (BAAG) of BAAC and ginseng extract showed the remarkable antimicrobial activity in the result of the experiment. Therefore, we used BAAG as pre-soaking and cultivating solution of soybean sprouts. Total bacterial and Escherichia coli cell count of soybean sprouts pre-soaked and cultivated in the BAAG-diluted solution (50 ppm) showed 2.5 ${\times}$ 10 CFU/mL and 1.3 ${\times}$ 10 cfu/mL in comparison with 3.5 ${\times}$ 10$^3$ cfu/mL and 5.8 ${\times}$ 10$^3$ cfu/mL of the control, respectively. BAAG-treated soybean sprouts also showed no slimy brown product and undesirable odor characterized in the control. It was confirmed that BAAG could be a proper pre-soaking and cultivating solution of soybean sprouts.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2006.04a
• /
• pp.380-381
• /
• 2006

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.6
• /
• pp.36-42
• /
• 2012

The empty fruit bunch fibers(EFB) of oil palm were examined for optimal utilization of the EFB fibers. The EFB fibers were obtained by shredding EFB, followe by removal of fines. The surface properties of the fibers were modified with various pre-treatments, such as hot water extraction, the soaking treatments with NaOH, $ClO_2$ and n-hexane. The changes in the fiber surface were examined with FT-IR method, which showed the changes in chemical compositions such as pectin, lignin, and etc. according to the pre-treatment methods. And the z-directional tensile testing of the fiber mold made of the treated EFB fibers showed the changes in the bonding strength by the pre-treatments. The fiber mold made of EFB fibers treated with $ClO_2$ showed the greater increase in the tensile energy absorption although the NaOH treatment resulted in the severer impact on the EFB fibers.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.265.1-265.1
• /
• 2013

Nanoporous anodic aluminum oxide (AAO), a self-ordered hexagonal array has various applications for nanofabrication such as nanotemplate, and nanostructure. In order to obtain highly-ordered porous alumina membranes, Masuda et al. proposed a two-step anodization process however this process is confined to small domain size and long hours. Recently, alternative methods overcoming limitations of two-step process were used to make prepatterned Al surface. In this work, we confirmed that there is a specific tendency used a PDMS stamp to obtain a pre-patterned Al surface. Using the nanoindentaions of a PDMS stamp as chemical carrier for wet etching, we can easily get ordered nanoporous template without two-step process. This chemical etching method using a PDMS stamp is very simple, fast and inexpensive. We use two types of PDMS stamps that have different intervals (800nm, 1200nm) and change some parameters have influenced the patterning of being anodized, applied voltage, soaking and stamping time. Through these factors, we demonstrated the patterning effect of large scale PDMS stamp.

• The Korean Journal of Food And Nutrition
• /
• v.16 no.3
• /
• pp.218-223
• /
• 2003

This study is proceeded on the development of standard method for making soybean paste by Korean traditional method. Fermentation condition of Meju was 1) Pre-fermentation : 30 days in about 20$^{\circ}C$ room, 2) Main fermentation : 5 days in 30$^{\circ}C$ or upper temperature, 3) Post fermentation and drying : 30 days in well sunlightened room in January. Meju was soaked in 18% salt solution(Meju 7kg/salt solution 20L) for 35～40 days (from late February to early April) and after soaking Meju was filtered as unsoluble solute and crushed and put into traditional Korean receptacle(named 'Dok'). Crushed Meju was stored from early April to mid September and Meju was changed into soybean paste(Doen-jang). During fermentation amino acid nitrogen in Doen-jang was slightly increased in early period and decreased lately. It has been proved that by panel test soybean paste made by the method suggested in this study was more excellent than commercially fermented soybean paste. This study has presented the possibility of commercial production of soybean paste made by traditional method.

• Korean Journal of Plant Resources
• /
• v.29 no.3
• /
• pp.339-346
• /
• 2016

This study was carried out to develop an effective seed propagation method for Thalictrum rochebrunianum var. grandisepalum (H. Lev.) Nakai by analyzing seed dormancy types and germination characteristics. Seeds were collected between September to October at Gangwon province, and well-selected seeds were used while being dry-stored at 4±1℃. The seed size ranged 4.52 × 1.58 ㎜ and the weight of thousand seeds were 1,603.5 ± 0.02 ㎎. The moisture content was 7.2%. Seeds were achene type, and morphology characters showed an elliptical shape and rough texture, and light brown in color. Moist-chilling treatment was conducted for dormancy breaking because the seeds had an undeveloped embryo of liner type. The embryo had developed during a moist-chilling period, constantly, and fully developed in 10 weeks. Consequently, it seemed to be non-deep complex or intermediate complex type of morphophysiological dormancy, and embryo dormancy was broken by wet-chilling for 10 weeks. After 10 weeks of wet-chilling treatment, seed germination began. Germination percentage was higher in dark condition raher than light condition and recorded the maximum at 25℃ in the dark (16.3%). A pre-soaking treatment with a combined plant growth hormones promoted germination and shortened T₅₀. Specifically, seed germination of 84.5% was achieved by pre-soaking of seeds with a combined solution of 500 ㎎/L GA₃ and 10 ㎎/L kinetin for 24 h after a wet-chilling treatment for 10 weeks. Thus the effect of plant growth hormones coupled with chilling temperature on seed breaking dormancy provide asubsequent growth of seedlings for successful plantation.

• Korean Journal of Plant Resources
• /
• v.30 no.1
• /
• pp.50-57
• /
• 2017

This study aimed to investigate the morphological characteristics and optimal germination conditions in seeds of Arabis pendula L., a traditionally edible and medicinal plant. The external seed shape was circular-obovate with narrow wings and dark brown. The seed length and width were 1.25 mm and 1.47 mm, respectively. The seeds were exalbuminous and the embryo was a bent type. Seed germination was the highest (49.7%) at $20^{\circ}C$ under dark conditions among the various temperature and light conditions applied. However, under the dark condition, the seedling was weak, overgrown, and the cotyledons were small and folded. To improve the germination and growth of seedlings, the seeds were pre-treated with $GA_3$ solutions of varying concentrations (0, 200, 500, and 1,000 mg/L). The seed germination and seedling growth were effectively improved by $GA_3$ pre-treatment. The germination rate was the highest (97.3%), mean germination time was the shortest (8.1 days), and a vigorous growth of seedlings was observed upon pre-soaking the seeds in 500 mg/L $GA_3$ solution. In conclusion, the best method for germination was pre-soaking in 500 mg/L $GA_3$ ($4^{\circ}C$, dark, 24 h) and incubating the seeds at $20^{\circ}C$ for 15 days.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.12
• /
• pp.1653-1661
• /
• 2007

The research aimed to establish the standard extraction procedure for examining brazilin, the major chromophoric substance of Sappanwood, using GC-MS with the ultimate goal of identifying the sappanwood dye in severely faded archaeological textiles. The amount of brazilin represented by the GC abundance was the largest when acetone was used as the extraction medium, followed by methanol. Shaking plate operated at room temperature was more effective than the waterbath shaker which was operated at $30^{\circ}C$. In both cases, the extraction method which incorporated one hour pre-soaking before the 12 hours of actual extraction resulted in a larger amount of brazilin detection than the extraction procedure without the one hour pre-soaking. In case of water extraction, pH 5 resulted in the most effective pH level for the extraction of brazilin, The best GC-MS parameter for detecting brazilin was to set the column temperature initially at $50^{\circ}C$. gradually increase to $210^{\circ}C$ at a $23^{\circ}C/min$ rate, finally increase to $305^{\circ}C$ at $30^{\circ}C/min$ rate, and hold for 14 minutes, and the MSD scan range at $75{\sim}400m/z$.