• Journal of the Optical Society of Korea
• /
• v.20 no.6
• /
• pp.799-806
• /
• 2016

We present a polarization-dependent prism array film for controlling the viewing angle distribution of liquid crystal (LC) display panels without loss of light efficiency. On a directional backlight unit, our polarization-dependent prism array film, made into a stacked bilayer with a well-aligned liquid crystalline reactive mesogen (RM) layer on the UV-imprinted prism structure, can continuously control the light refraction function of the prism array by electrically switching incident polarization states of a polarization-controlling layer prepared by a twisted nematic LC mode. The viewing angle control properties of the polarization-dependent prism array film are analyzed under different prism angle and refractive index conditions of the RM layer. A simple analytic model is also presented to describe the intermediate viewing angle distributions with continuously varying applied voltages and incident polarization states.

• Journal of the Optical Society of Korea
• /
• v.13 no.4
• /
• pp.478-483
• /
• 2009

An optical sheet with a cone array is designed, simulated, and fabricated in order to substitute the dual crossed prism sheets in the edge-type LCD backlight. The optimum structure of cone textures that is compatible with the dual crossed prism sheets was obtained by simulating the backlight installed with the cone array optical sheet. A SU-8 photoresist films of thickness $30{\sim}50{\mu}m$ were spin-coated on a polyethylene terephtalate film (PET), and the cone texture array was formed by using the diffuse lithography that employed a photomask with circular patterns and an optical diffuser.

• Korean Journal of Optics and Photonics
• /
• v.16 no.3
• /
• pp.217-224
• /
• 2005

A light-guide plate of an LCD backlight coupled with a microfresnel lens array (MFLA) is designed and analyzed. Computer simulated results of optical characteristics of our MFLA-type light-guided plate compared with the conventional prism-type one are presented. We show that the MFLA-type light-guide plate can replace well the conventional prism-type plate.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.12
• /
• pp.1135-1142
• /
• 2007

STSAT-2 has an on-board satellite retroreflector array for precise orbit determination. Satellite retroreflector array reflects photon emitted from laser and uses to determine precisely the distance from ground station to satellite by the round-trip travel time of photon. The retroreflector array of protoflight model has been developed and verified through environmental tests. This paper describes the protoflight model of retroreflector array and reports environmental test results. The environmental tests of protoflight model retroreflector array were performed successfully without damage of corner cube prism occurred in engineering model development.

• Journal of Sensor Science and Technology
• /
• v.26 no.2
• /
• pp.91-95
• /
• 2017

Recently, infrared (IR) spectrometers have been required in various fields such as environment, safety, mobile, automotive, and military. This IR dispersive sensor detection method of substances is widely used. In this study, we fabricated a silicon (Si) prism-based near infrared (NIR) spectrometer utilizing micro electro mechanical system (MEMS) technology. Si prism-based NIR spectrometer utilizing MEMS technology consists of upper, middle, and lower substrates. The upper substrate passes through the incident IR ray selectively. The middle substrate, acting as a prism, disperses and separates the incident IR beam. The lower substrate has an amorphous Si (a-Si)-based bolometer array to detect the IR spectrum. The fabricated Si prism-based NIR spectrometer utilizing MEMS technology has the advantage of a simple structure, easy fabrication steps, and a wide NIR region operating range.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1427-1429
• /
• 2008

In this paper, an illumination system design using two lamps was proposed to improve the brightness of the projector. The proposal is based on the results from optical simulation. The prism array was applied to maintain the same optical properties, such as brightness distribution for the divergence angle and the composed beam size of the system. These were compared to those of the one UHP lamp system. The brightness of the two-lamp system, having a panel size of 0.74" and an f/2.9, increased by a factor of 1.7 when compared to the brightness of one UHP lamp system.

• Journal of the Optical Society of Korea
• /
• v.4 no.1
• /
• pp.62-65
• /
• 2000

A new type of multi-viewing zone screen for multiview 3-D display is described. The screen is made by stacking a Fresnel lens and a reflective prism array plate. The screen performs both focusing and beam dividing functions and directs very narrow light beams to three viewing zones for three spectators. The results of experimental testing of the screen have demonstrated that current technology of Fresnel lens and prism grooves on PMMA(Ploymethyl Methacrylate) allows manufacture of screen having a pixel size of about 1-2 mm. This size is reasonable enough for a screen with dimensions about 1m size. Optical qualities of Fresnel lenses and grooved prism arrays achieve an angular resolution for the screen of several angular minutes.

• Korean Journal of Optics and Photonics
• /
• v.20 no.2
• /
• pp.118-122
• /
• 2009

An optical sheet with microlens array (MLA) is designed and fabricated as a substitute for the prism sheets of LCD backlight. Using photoresist thermal reflow, MLAs were fabricated on PET film with thickness of $100{\mu}m$, and we measured the change of MLA profile in terms of exposure time, reflow temperature and reflow time.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.1
• /
• pp.92-99
• /
• 2008

KOMSAT-5 will attach an laser retroreflector array for precise orbit determination. Laser retroreflector array was developed by DFZ in Germany and have pyramid type composed of four corner cube prisms. In this paper, the performance analyses as effective area of retroreflector and photons measured by link budget and position of ground station were performed.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.2
• /
• pp.1-7
• /
• 2006

A light guided plate coupled with the micro Fresnel lens array(MFTA) is designed to improve the efficiency of the LCD backlight unit. Blazed Frenel lens and binary multi-level Fresnel lens are adapted for the MFLA. This type of MFLA can replace the prism sheet and diffuser sheet which are used for the conventional type of the LCD backlight unit. The luminance and uniformity are calculated to verify the performance of the MFLA type LCD backlight unit.