• 한국초등과학교육학회지:초등과학교육
• /
• 제24권1호
• /
• pp.86-101
• /
• 2005

In this study, a brain-basrd model for science teaching and learning was developed based on the natural processes which human acquire knowledge about a natural object or on event, the major domains of science educational objectives of the national curriculum, and the human brain's organizational patterns and functions. In the model, each educational objective domain is related to the brain regions as follows: The affective domain is related to the limbic system, especially amygdala of human brain which is involved in emotions, the psychomotor domain is related to the occipital lobes of human brain which perform visual processing, temporal lobes which perform functions of language generating and understandng, and parietal lobes which receive and process sensory information and execute motor activities of body, and the cognitive domain is related to the frontal and prefrontal lobes which are involved in think-ing, planning, judging, and problem solving. The model is a kind of procedural model which proceed fiom affective domain to psychomotor domain, and to cognitive domain of science educational objective system, and emphasize the order of each step and authentic assessment at each step. The model has both properties of circularity and network of activities. At classrooms, the model can be used as various forms according to subjects and student characteristics. STS themes can be appropriately covered by the model.

• 마이크로전자및패키징학회지
• /
• 제6권2호
• /
• pp.23-30
• /
• 1999

이성질체에 따른 폴리이미드 박막의 잔류응력 영향과 모폴로지와의 상관관계가 조사되었다. 이를 위해, Poly(phenylene biphenyltetracarboximide) (BPDA-PDA)와 poly (oxydiphenylene biphenyltetracar-boximide) (BPDA-ODA)를 여러 다른 diamine인 1, 3-phenylene diamine (1, 3-PDA), 1.4-phenylene diamine (1,4-PDA)과 3.4'-oxydiphenylene diamine (3,4'-ODA) , 4,4'-oxydiphenylene diamine (4.4'-ODA)으로부터 제조하였다. 이들 박막에 대하여, Thin Film Stress Analyzer (TFSA)를 이용하여 공정온도 (25~$400^{\circ}C$)하에서 전구체의 열적 이미드화에 따라 실시간으로 폴리이미드 박막의 잔류응력 거동을 측정하였다. 폴리이미드 박막의 잔류응력은 면 방향 배향성과 사슬 질서도가 우수한 BPDA-1,4-PDA가 7MPa로 가장 낮게 나타났으며 BPDA-1,3-PDA, BPDA-3,4'-ODA, BPDA-4,4'-ODA의 경우 40~50Mpa 범위에 있었다. 이성질체에 따른 폴리이미드 박막의 잔류응력은 모폴로지 (사슬 강직도, 질서도, 배향성) 변화 및 유리전이 거동과 관련된 사슬 운동성을 이용하여 분석되었다.

• 전기학회논문지
• /
• 제61권5호
• /
• pp.744-752
• /
• 2012

In this study, the Polynomial-based Radial Basis Function Neural Networks is proposed as an one of the recognition part of overall face recognition system that consists of two parts such as the preprocessing part and recognition part. The design methodology and procedure of the proposed pRBFNNs are presented to obtain the solution to high-dimensional pattern recognition problems. In data preprocessing part, Principal Component Analysis(PCA) which is generally used in face recognition, which is useful to express some classes using reduction, since it is effective to maintain the rate of recognition and to reduce the amount of data at the same time. However, because of there of the whole face image, it can not guarantee the detection rate about the change of viewpoint and whole image. Thus, to compensate for the defects, Linear Discriminant Analysis(LDA) is used to enhance the separation of different classes. In this paper, we combine the PCA&LDA algorithm and design the optimized pRBFNNs for recognition module. The proposed pRBFNNs architecture consists of three functional modules such as the condition part, the conclusion part, and the inference part as fuzzy rules formed in 'If-then' format. In the condition part of fuzzy rules, input space is partitioned with Fuzzy C-Means clustering. In the conclusion part of rules, the connection weight of pRBFNNs is represented as two kinds of polynomials such as constant, and linear. The coefficients of connection weight identified with back-propagation using gradient descent method. The output of the pRBFNNs model is obtained by fuzzy inference method in the inference part of fuzzy rules. The essential design parameters (including learning rate, momentum coefficient and fuzzification coefficient) of the networks are optimized by means of Differential Evolution. The proposed pRBFNNs are applied to face image(ex Yale, AT&T) datasets and then demonstrated from the viewpoint of the output performance and recognition rate.

• 전기학회논문지
• /
• 제58권5호
• /
• pp.1025-1034
• /
• 2009

In steel making production line, steel slabs are given a unique identification number. This identification number, Slab management number(SMN), gives information about the use of the slab. Identification of SMN has been done by humans for several years, but this is expensive and not accurate and it has been a heavy burden on the workers. Consequently, to improve efficiency, automatic recognition system is desirable. Generally, a recognition system consists of text localization, text extraction, character segmentation, and character recognition. For exact SMN identification, all the stage of the recognition system must be successful. In particular, the text localization is great important stage and difficult to process. However, because of many text-like patterns in a complex background and high fuzziness between the slab and background, directly extracting text region is difficult to process. If the slab region including SMN can be detected precisely, text localization algorithm will be able to be developed on the more simple method and the processing time of the overall recognition system will be reduced. This paper describes about the slab region localization using SIFT(Scale Invariant Feature Transform) features in the image. First, SIFT algorithm is applied the captured background and slab image, then features of two images are matched by Nearest Neighbor(NN) algorithm. However, correct matching rate can be low when two images are matched. Thus, to remove incorrect match between the features of two images, geometric locations of the matched two feature points are used. Finally, search rectangle method is performed in correct matching features, and then the top boundary and side boundaries of the slab region are determined. For this processes, we can reduce search region for extraction of SMN from the slab image. Most cases, to extract text region, search region is heuristically fixed [1][2]. However, the proposed algorithm is more analytic than other algorithms, because the search region is not fixed and the slab region is searched in the whole image. Experimental results show that the proposed algorithm has a good performance.

• 전기학회논문지
• /
• 제58권10호
• /
• pp.2071-2078
• /
• 2009

In this paper, we proposed a non-contact respiration measurement system with ultrasonic proximity sensor. Ultrasonic proximity sensor approach of respiration measurement which respiration signatures and rates can be derived in real-time for long-term monitoring is presented. 240 kHz ultrasonic sensor has been applied for the proposed measurement system. The time of flight of sound wave between the transmitted signal and received signal have been used for a respiration measurement from abdominal area. Respiration rates measured with the ultrasonic proximity sensor were compared with those measured with standard techniques on 5 human subjects. Accurate measurement of respiration rate is shown from the 50 cm measurement distance. The data from the method comparison study is used to confirm the performance of the proposed measurement system. The current version of respiratory rate detection system using ultrasonic can successfully measure respiration rate. The proposed measurement method could be used for monitoring unconscious persons from a relatively close range, avoiding the need to apply electrodes or other sensors in the correct position and to wire the subject to the monitor. Monitoring respiration using ultrasonic sensor offers a promising possibility of non-contact measurement of respiration rates. Especially, this technology offers a potentially inexpensive implementation that could extend applications to consumer home-healthcare and mobile-healthcare products. Further advances in the sensor design, system design and signal processing can increase the range of the measurement and quality of the rate-finding for broadening the potential application areas of this technology.

• 한국실내디자인학회논문집
• /
• 제8호
• /
• pp.44-57
• /
• 1996

Now interior designers have to meet this challenge by rising to the occasion and taking advantage of opportunities while strengthening their skills which have not kept pace with the increasing emphasis on design. furthermore, they are hampered by the lack of a general working design methodology. Interior designers in Korea have been slow to recognize the need for developing a specification methodology manual which could be adapted to meet varying requirements and modified to reflect designers experiences. The design process in Korean interior design often involves utilizing drawing document methods based on architectural prototypes rather than upon drawing methods developed by design firms as a result of work experience s and unique needs. However, these unique nees are nearly always limited by traditional working drawing methods. This has led to confusion and inaccuracies due to the lack of a single starndardized and universally acceptable working drawing methodology which is capable of reflecting the needs of all parties involved , partiality those of interior designers. This thesis is an attmepted to establish the necessity for developing a better working drawing methodogoy or technical mans of satisfying the information sorting and processing need s of interior design professionals, a five step suggestion for developing such a methodology follows. First, arrange pertinent design research information by means of a process which can be employed throughout the design process, from inception through to working drawing stage. The end result should be an interior architectural design process culminating in a pattern skillfully blending architecture, vision and product with environment . The design process should be manifested into a series of definable steps and yet sufficiently flexible and variable in order to provide the most apropos design solution. Secondly , motify the design methodology systematically according to site conditions and prevailing construction technology and manifest the design process in a booklet form so that it reflects a desired pattern. Thirdly, this methodology should incorporate a stand-ardized and functional process capable of being utilized to impact clear design concepts and objectives with preci-sion and efficiency in a manual form.

• 한국정보전자통신기술학회논문지
• /
• 제10권2호
• /
• pp.141-146
• /
• 2017

본 논문에서는 저전력 영상 특징 추출 하드웨어 설계를 위한 하드웨어 폴딩 기법 기반 저면적 Gradient magnitude 연산기 구조를 제안한다. 하드웨어 복잡도를 줄이기 위해 Gradient magnitude 벡터의 특징을 분석하여 기존 알고리즘을 하드웨어를 공유하여 사용할 수 있는 알고리즘으로 변경하여 Folding 구조가 적용될 수 있도록 했다. 제안된 하드웨어 구조는 기존 알고리즘의 특징을 최대한 이용했기 때문에 데이터 품질의 열화가 거의 없이 구현될 수 있다. 제안된 하드웨어 구조는 Altera Quartus II v16.0 환경에서 Altera Cyclone VI (EP4CE115F29C7N) FPGA를 이용하여 구현되었다. 구현 결과, 기존 하드웨어 구조를 이용하여 구현한 연산기와의 비교에서 41%의 logic elements, 62%의 embedded multiplier 절감 효과가 있음을 확인했다.

• 한국정보전자통신기술학회논문지
• /
• 제10권2호
• /
• pp.192-197
• /
• 2017

본 논문은 저전력 영상 특징 추출 하드웨어 설계를 위한 공통 부분식 제거 기법 기반 이미지 필터 하드웨어 최적화 기법을 제안한다. 저전력 및 고성능 물체인식 하드웨어는 공장 자동화를 위한 산업용 로봇에 필수 모듈로 채택되고 있다. 따라서 물체인식 하드웨어의 영상 특징 추출 알고리즘에 다양하게 적용되는 Gaussian gradient 필터 하드웨어의 저면적 설계가 필수적이다. Gaussian gradient 필터의 하드웨어 복잡도를 줄이기 위해 필터에 사용되는 계수의 Symmetric한 특징과 Transposed form FIR 필터 하드웨어 구조를 이용했다. 제안된 이미지 필터의 하드웨어 구조는 알고리즘에 적용된 계수의 변형 없이 구현되었기 때문에 윤곽선 검출 알고리즘에 적용했을 때 검출 데이터의 열화 없이 구현될 수 있다. 제안된 이미지 필터 하드웨어 구조는 기존 구조와 비교했을 때 곱셈기의 수를 50% 절감할 수 있음을 확인했다.

• 조명전기설비학회논문지
• /
• 제15권1호
• /
• pp.70-77
• /
• 2001

본 논문에서는 고도정수처리설비에 활용되는 오존접촉조의 반응 특성을 퍼지 모델 형태로 표현하는 방법을 제안한다. 퍼지모델에 사용될 입력 및 출력 변수들은 오존처리의 목적과 정수장의 수질관리항목을 기준으로 선정하였다. 제안된 입력 변수들은 용존유기탄소농도, $UV_{254}$흡광도, 과망간산칼륨소비량, 주입오존농도, 수온 및 접촉시간이며, 출력변수들은 용존유기탄소농도, $UV_{254}$흡광도 및 과망간산칼륨소비량이다. 입력변수들에 대한 소속도 함수들은 삼각형 형태로 설계하였으며, 파이롯플랜트에서 취득한 조업데이터를 참고하여 소속도를 결정했다. 퍼지모델의 결론부는 선형식 형태로 설계하였으며, 선형식에 포함되는 상수들은 조업데이터를 이용하여 최소자승법으로 구했다. 또한 출력 변수들간에 상호 영향이 없다는 특성으로부터 전체 퍼지모델로을 각 변수별로 독립적인 기능을 갖는 3개의 부분 퍼지모델로 분할하여 설계함으로서 계산과 이해의 편리를 도모하였다. 모의실험을 통해 제안된 퍼지모델의 타당성을 확인해 본 결과, 모델의 튜닝시에 사용한 입력 데이터에 대해 퍼지모델의 출력이 조업데이터와 거의 동일함을 알 수 있었다.

• 한국안전학회지
• /
• 제27권6호
• /
• pp.192-204
• /
• 2012

For a severe accident of nuclear power plant, an approach to estimation of the radiological source term using a severe accident code(MELCOR) has been proposed. Although the MELCOR code has a capability to estimate the radiological source term, it has been hardly utilized for the radiological consequence analysis mainly due to a lack of understanding on the relevant function employed in MELCOR and severe accident phenomena. In order to estimate the severe accident source term to be linked with the radiological consequence analysis, this study proposes 4-step procedure: (1) selection of plant condition leading to a severe accident(i.e., accident sequence), (2) analysis of the relevant severe accident code, (3) investigation of the code analysis results and post-processing, and (4) generation of radiological source term information for the consequence analysis. The feasibility study of the present approach to an early containment failure sequence caused by a fast station blackout(SBO) of a reference plant (OPR-1000), showed that while the MELCOR code has an integrated capability for severe accident and source term analysis, it has a large degree of uncertainty in quantifying the radiological source term. Key insights obtained from the present study were: (1) key parameters employed in a typical code for the consequence analysis(i.e., MACCS) could be generated by MELCOR code; (2) the MELOCR code simulation for an assessment of the selected accident sequence has a large degree of uncertainty in determining the accident scenario and severe accident phenomena; and (3) the generation of source term information for the consequence analysis relies on an expert opinion in both areas of severe accident analysis and consequence analysis. Nevertheless, the MELCOR code had a great advantage in estimating the radiological source term such as reflection of the current state of art in the area of severe accident and radiological source term.