• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.840-843
• /
• 2002

The dry pulverizing/Mixing device is used to deal with the spent fuels for the safe disposal. The separated pellets from hulls by a slitting device are put and oxidized from UO$_2$ solid pellet to U$_3$O$\_$8/ powder in the device. The device have been developed based on a voloxidation method which is one of several dry de-cladding methods. We have benchmarked dry de-cladding methods, analyzed applicability to the advanced spent fuel management process, integrated and compared several configuration, and finally derived detailed specifications proper to requirements for the device. Also, thermal characteristics of the device such as thermal stress and strain have been analyzed by the commercial software, 1-DEAS, and the reliability of the results have been verified by the KOLAS(Korea Laboratory Accreditation Scheme). The UO$_2$ solid pellets are put in the device which has a capacity of 20 kgHM per a batch, heated up about 600$^{\circ}C$ in the air environment. Then, the UO$_2$ solid pellets are oxidized into the U$_3$O$\_$8/ powder, and the powder is collected in a special vessel. The device has been designed and developed as fellows: the multi-staged fine hole meshes are used to reduce the size of the powder gradually, heat and air(oxygen) are supplied continuously to reduce the reaction time, and slight vibration effect are applied to collect powder cling to the device.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.6
• /
• pp.790-797
• /
• 2011

We evaluated the antioxidant compounds and activity of the methanolic extracts of foxtail millet (FM), proso millet (PM), and sorghum (SG) using different pulverizing methods (pin mill and ultra fine). The particle size of the FM, PM, and SG were 102.12, 89.52, and $102.25\;{\mu}m$, respectively, using the pin mill pulverizer. The sizes were 9.43, 9.52, and $10.18\;{\mu}m$, respectively, using the ultra fine pulverizer. There was no difference in moisture, crude fat, ash, or protein content between the two different pulverizing methods. The total ${\gamma}$-oryzanol content of the FM using the pin mill and ultra fine pulverizers was 116.07 and $145.30\;{\mu}g$/g, respectively. The total polyphenol content of the SG using the pin mill and ultra fine pulverizers was 14.58 and 15.03 mg/g extract residue, respectively. There was no difference in total flavonoid or tannin content of the methanol extracts between the two different pulverizing methods. The major phenolic compounds in FM were pyrogallol, gallic acid, (+)-catechin, salicylic acid, ferulic acid, and rutin; in PM, they were pyrogallol, rutin, gallic acid, kaempfrol, and salicylic acid; in SG, they were (+)-catechin, salicylic acid, pyrogallol, myricetin, hesperidin and chlorogenic acid. SG had a higher radical scavenging activity than FM or PM extracts. The DPPH and ABTS radical scavenging activities of the SG extracts using the ultra fine pulverizer were 178.10 and 251.56 mg TE/g extract residue, respectively. We noted a significant correlation between free radical scavenging activity and polyphenolic compound.

• Journal of Biosystems Engineering
• /
• v.37 no.3
• /
• pp.140-147
• /
• 2012

Purpose: This study was conducted to understand the work performance of crank-type rotavators and compare them with those of rotary-type rotavators in Korean farmland conditions. Methods: Tillage operations were carried out using both rotavators with the same nominal rotavating width and rated power. During the operations, PTO speed and torque, actual work speed, and rotavating width and depth were measured. To evaluate work performance, pulverizing ratio, inversion ratio, and specific volumetric tilled soil were calculated and compared for each rotavator. Results: It is found that the crank-type rotavator has better specific volumetric tilled soil performance and deep tillage, while the pulverizing ratio is worse. Conclusions: Crank-type and rotary type rotavator have diffenent properties each other in several work performances. It's important, therefore, to choose a suitable type of rotavator that satisfy the farmer's requirements in accordance with the condition of field and the purpose of tillage operation.

• Journal of Powder Materials
• /
• v.2 no.2
• /
• pp.135-141
• /
• 1995

As the first step of study on fabrication of ceramic powders from phytoliths in rice, especially in rice husks, pulverization method of rice husks and the properties of milled rice husks were investigated. Impact methods, such as ball milling, were not meaningful for pulverizing elastic and thin fabric structure of rice husks. The most effective one was cutting method. In the present work, a rotating knife cutting method was applied to pulverizing rice husks. A 40-mesh screen was inserted under the rotating knives. The most portion of the milled powder was found in -50/+100 mesh section. Morphology of the milled rice husks revealed that the husks larger than 70 mesh were flake-like shape, at -70/+100 mesh section relatively equi-axed shape, at -170/+325 mesh section rod-like shape, and below 325 mesh section dust-like shape. Tap density of raw rice husks was about 0.1 $g/cm^3$, while those of milled rice husks were over $0.4 g/cm^3$. This meant that, for a given volume of reactor, raw material charge can be increased more that 4 times when using milled rice husks than unmilled one. True densities of unmilled and milled rice husks were higher than $1.4 g/cm^3$, and increased with decreasing milled sizes.

• Journal of Biosystems Engineering
• /
• v.37 no.5
• /
• pp.279-286
• /
• 2012

Purpose: This study has been conducted to investigate the applicability of motion analysis of tillage blade for estimation of tillage characteristics of crank-type and rotary-type rotavators. Methods: The interrelation between tillage traces from motion analysis and field test results including rotavating depth, pulverizing ratio and inversion ratio at the same work conditions were analyzed for both crank-type and rotary-type rotavators. The work conditions include working speed of prime mover tractor and PTO speed of rotavators. For the motion analysis, joint conditions of main connecting component were specified considering the actual working mechanism of rotavator. Results: There were important correlations for the trend between motion analysis and field test results. Conclusions: Although further study is needed for applying motion analysis to estimate the accurate tillage related parameters such as rotavating depth, the soil pulverizing ratio and inversion ratio, it could be used to compare the tillage characteristics of various rotavators quickly and simply.

• Journal of Animal Science and Technology
• /
• v.62 no.6
• /
• pp.884-892
• /
• 2020

Corticosterone is known as a biological stress index in many species including birds. Feather corticosterone concentration (FCC) has increasingly been used as a measure for chronic stress status in broiler chickens. As sample preparation is the first step of analytical process, different techniques of feather matrix disruption need to be validated for obtaining better result in analysing corticosterone extraction. The current study was a validation of pulverizing the feather by bead beater (BB) and surgical scissors (SS) processing prior to corticosterone extraction in feather of broiler chickens. The type of feather processing prior to the hormone extraction may alter the final output. Thereby, finding a standard method according to laboratory facilities is pivotal. This study carried out to determine the effects of feather pulverization methods on the extraction amount of corticosterone in broiler chickens. Feathers were sampled from four weeks old Ross 308 broiler chickens (n = 12 birds). All broiler chickens were kept under the same environmental condition and had access to feed and water. Feather samples were assigned to one of the following processing methods 1) using a BB for pulverizing and 2) using a SS for chopping into tiny pieces. Each sample was duplicated into two wells during enzyme immunoassay (EIA) analysis to improve the accuracy of the obtained data. The results showed lower standard errors and constant output of FCC by using the BB method compared with the SS method. Overall comparison of FCC showed a significantly higher (p < 0.001) amount of the FCC in the BB compared with the SS. Overall, using the BB method is recommended over the SS method for feather processing due to the ability to homogenize a large number of samples simultaneously, ease of use and greater extraction of feather corticosterone.

• Journal of Biosystems Engineering
• /
• v.38 no.2
• /
• pp.73-80
• /
• 2013

Purpose: This study was conducted to compare tillage and loads characteristics of three types of rotavators in farmland working condition of Korea. Methods: Tillage operations using three types of rotavators, i.e. rotary-type, crank-type and plow-type, were carried out in a dry field of Korea. The same prime mover tractor was used for driving three types of rotavators, and under several operational conditions, tillage characteristics such as actual working speed, rotavating depth, rotavating width, actual field capacity, flow of tilled soil, soil inversion ratio, and pulverizing ratio were measured. In addition, loads characteristics like torque and required power of Power Take-Off (PTO) shaft were calculated. Results: The average rotavating depth was smaller than the nominal value for all rotavators, and the difference was the greatest in the plow-type rotavator. Nevertheless, the plow-type rotavator showed the largest rotavating depth. The rotavating width was the same as the nominal value of all rotavators. The flow of tilled soil at the same operational conditions was the greatest in the plow-type rotavator and was the smallest in the rotary-type rotavator. In the most commonly used gear conditions of L2 and L3, the average soil pulverizing ratio was the greatest in the rotary-type rotavator, and followed by crank-type and plow-type rotavators in order. In the gear L2 and L3, the plow-type rotavator also had the lowest average soil inversion ratio while the rotary-type and crank-type rotavators had the same soil inversion ratio each other. The average torque and power of PTO shaft in the gear L2 and L3 were the highest in the plow-type rotavator. The load spectra of PTO shaft applying rain flow counting method and Smith-Waston-Topper equation to the measured torque showed that the modified torque amplitude was the greatest in the crank-type rotavator. This may come from the large torque fluctuation of crank-type rotavator during tillage operations. Conclusions: The three types of rotavators had different tillage and loads characteristics. The plow-type rotavator had the deepest rotavating depth, the smallest soil inversion ratio, the largest soil pulverizing ratio and required PTO power. Also, the crank-type rotavator showed a large torque fluctuation because of their unique operational mechanism. This study will help the farmers choose a suitable type of rotavator for effective tillage operations.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.109-110
• /
• 2021

An attempt has been made on a constructive approach to evaluate the performance of snail shell ash (SSA) for its corrosion performance under marine environments. Corrosion performance of steel rebar in chloride contaminated SSA with (0% to 50%) replacement levels of cement extract medium was examined through electrochemical and weight loss techniques. Initially, snail shell powder (SSP) is made by pulverizing and subsequently SSA is by thermal decomposition methods. A critical level of 20 % SSA improved both corrosion resistance properties of cement extracts. SSA is a suitable replacement material for natural limestone in cement productions.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.4
• /
• pp.353-358
• /
• 2012

This study was carried out to evaluate antioxidant and anticancer activity of crudes extracts from colored corn (Zea mays. L.) among particle size with different pulverizing methods (pin mill and ultra fine pulverizer). In cytotoxicity test using extracts from the flours grounded by pin mill and ultra fine pulverizer respectively, it showed that A-549 was the highest anticancer activity among in vitro using 4 cancer cell line types (Hep-G2, A-549, HCT-116 and MCF-7). Assessing the antioxidant activities of crude extracted from different pulverizing methods was measured by trolox equivalent antioxidant capacity (TEAC) and ferric reducing antioxidant power (FRAP). Higher scanvening activity against free radical was observed in the crude extracted from small particle size flours of colored corn than in those of the big particle size.

• Journal of Ginseng Research
• /
• v.26 no.2
• /
• pp.79-84
• /
• 2002

In this study, cell cracker method as a non-collision method was evaluated for the possibility in manufacturing red ginseng powder. In color value of red ginseng powder, the L values indicating brightness were 68.18 for hammer mill (group A) and 72.08 for cell cracker (group B). The a values (redness) and b values (yellowness) were 4.21 26.56 for group A and 5.73, 28.36 for group B, respectively. As an extraction time increased, the absorbances at 420 nm of water extract of both groups were increased. In the loose bulk density, tapped bulk density and volume reduction radio indication the of powder in group A were less than those in group B. In both groups, the angles of side of red ginseng powder were shown less value than the angles of side of the powder. These two angles in group A were lets than those in group B. In sensory evaluation, the touchness between both groups was, not observed significant difference. In the contrary, the color and flavor, main factors affecting the overall quality of red ginseng powder product of group B were shown superior to those of group A. The overall preference of group B was shown higher than that of group A.