The proper nozzle spacings have been tried to determined the better evenness of distribution on the development of the boom type nozzle system with three nozzles made in Korea-disk type, cap type and bolt type. The operating pressure has been changed in 7 levels ($2kg/cm^2-8kg/cm^2$) and the operating height in 3 levels (30, 40, 50cm) to find characteristics of deposit pattern and the proper spacing of each nozzle was examined and computed. The results of this study were as follows; 1. The CU(%) of the deposit distribution was improved with the operating pressure of $5kg/cm^2$ or $6kg/cm^2$ in Nozzle A with 80% and Nozzle C with 83%, and $7kg/cm^2$in Nozzle B with 80% 2. The better deposit distribution was got ten at operating height 40cm with CU 86% in Nozzle A, and 50cm in both Nozzle B, C with 80% 3. The spray deposit distribution was getting of improvement with decrease of nozzle spacing, nevertheless about half diameter of the spraying circle was recommended in regard to the cost and the work performance. 4. Improvement of quality of nozzles tested in this research may be required not to be less than their CU 90% in the use as boom-type nozzle system.
The purpose of this study was to analyze a trend of profitability classified by characteristics of hospitals and to analyze related factors. The data for this study were derived from survey material conducted by the Korean Hospital Association on 33 hospitals in Korea between 1993 and 2002. Profitability was measured in the aspect of investment profit rate and operation profit rate with net profit to total assets, normal profit to total assets and operating margin to gross revenue as dependent variables. Independent variables were classified by general factors (ownership, number of beds, period of establishment, region), financial factors (total asset turnover, liabilities to total assets, current ratio, fixed ratio, inventories turnover, personnel costs per operation profit, material costs per operation profits), composition of manpower and facilities(personnel and area per beds), productivity index(the number of daily patients per medical doctor, the number of daily patients per nurse), the score of quality assurance activities. First, Concerning the specialists per beds or area per beds and profitability of hospitals there was not statistically significant. Second, Those hospitals having the most daily patients per nurse had significantly higher profitability than the others, but the number of daily patients per medical doctor had little effect on the profitability. Thirds, Those hospitals having a higher proportion total asset turnover tended to show significantly higher profitability compared to other hospitals, but the liabilities to total assets and liquidity ratio had a little difference to the profitability. Those hospitals having a higher proportion personnel costs per operation profit and material costs per operation profits tended to show significantly lower hospital profitability compared to other hospitals. Fourth, In regression analysis, hospital profitability had negative relationship with personnel costs per operation profit or material costs per operation profits. While it had positive relationship with total asset turnover, the number of daily patients per nurse. In conclusion, private hospitals had higher profitability than that of public hospitals. Though factors related to profitability of hospital were different according to ownership, it is important for securing appropriate profitability by operating appropriate number of nurse, raising total asset turnover, and reducing personnel costs, material costs per operation profits. This study can be used as a baseline data for planning of hospital management. But the study may be limited in that the results cannot be generalized due to its small sample size. However, this longitudinal observation of 33 hospitals over ten year period has significant merit alone.
This study is to recognize the relationship between better life index, nursing performance and intents to leave among hospital nurses by comparison. From July 1to July 20, 2012. we collected survey results subjecting on total 700 nurses by random sampling of hospital-class medical institutes over 200 beds located on Busan & Gyeongnam, and analyzed final 677 copies. We recognized the degrees and the differences of happiness index, professionalism, intents to leave among hospital nerses and analyzed the factors impacting on intents to leave among hospital nerses through correlation analysis and multiple regression analysis between variables. The main result is as follows: First, the average of the item related to happiness index of nurse was 3.03 (5 points of scale) and the average score of professionalism was 3.09 (medium degree) but the average score of turnover intention was 3.35 (relatively high); Second, professionalism and turnover intention according to characteristics of subjects were significant statistically (p<0.05) and turnover intention indicated a significant negative relation with happiness index and professionalism; Third, a factor which mostly impact on turnover intention indicated a significant level (p<0.05) in professionalism, happiness index, general hospital, 2.01 to 2.5 million of average pay. Based on such results, as happiness index and professionalism are indicated as major factors to turnover intention, multi-dimensional viewpoint of follow-up study including further variables is required and the plan to apply nursing intervention program for reducing turnover intention is also required.
Information types and display methods according to the relation between frequency of exposure and degree of cognition was suggested by this study as a way to enhance effective communication by information in aspect of user cognition. First of all, we ascertained the relation between frequency of exposure and degree of cognition by literature research for cognitive psychology and cognitive engineering psychology, results are as follows based in it. First, we suggested information types and attributes for visualization as 'Framework' which helps designers understand cognitive demands of users. Specifically, there are 4 types(STM, STA, LTM, LTA) of information according to the relation between frequency of exposure and degree of cognition, cognitive characteristics for each types and 'attributes matrix for visualization' which is consisted of 14 attributes of high -quality information and resorted by the types. Second, we suggested a guideline for display methods according to depth of information in the design process of information contents. For display methods of STM, STA information as primary information, we suggested "Attribution theory of Distinctiveness", "Advance Organizer", "Progress Closure", "Affordance", for display methods of LTM information as multidimensional information, we suggested "Modularity", "Consistency", "Mimicry", "Mnemonic Device". We had found from this study that there are distinction of status for attributes of information visualization according to information types or depth, and various display methods by them.
The textural properties of breads containing midified starches such as pregelatinized waxy corn starch, acetylated potato starch and hydroxypropylated tapioca starch, were investigated to determine the optimum addition level of modified starches. Effects of modified starches on dough properties were investigated through a farinogram and amylogram based on the different additional levels of modified starches (3%, 6%, 9%, 12% and 15% of flour content). Moisture contents and firmness values were measured to investigate the degree of retrogradation at 0 h, 36 h and 72 h after production. The levels of moisture contents were highest upon addition of pregelatinized waxy corn starch followed by acetylated potato starch and lowest upon addition of hydroxypropylated tapioca starch. Overall, higher moisture contents resulted in lower firmness levels. The preference scores by type of modified starch were highest upon addition of 9% hydroxypropylated tapioca starch, 3% pregelatinized waxy corn starch, and 6% acetylated potato starch, respectively. Preference scores were significantly correlated with textural properties such as volume, absorption, stability and weakness (p<0.01).
Journal of the Institute of Electronics Engineers of Korea TE
/
v.39
no.3
/
pp.51-58
/
2002
The conventional code division multiple access(CDMA) detector shows severe degradation in communication quality as the number of users increases due to multiple access interferences(MAI). This problem thus restricts the user capacity. Various multiuser detection algorithms have been proposed to overcome the MAI problem. The existing detectors can be generally classified into one of the two categories : linear multiuser detection and subtractive interference cancellation detectors. In the linear multiuser detection, a linear transform is applied to the soft outputs of the conventional detector. In the subtractive interference cancellation detection, estimates of the interference are generated and subtracted out from the received signal. There has been great interest in the family of the subtractive interference cancellation detection because the linear multiuser detection exhibits the disadvantage of taking matrix inversion operations. The successive interference cancellation (SIC) and the parallel interference cancellation (PIC) are the two most popular structures in the subtractive interference cancellation detector. The SIC structure is very simple in hardware complexity, but has the disadvantage of increased processing delay time, while the PIC structure is good in performance, but shows the disadvantage of increased hardware complexity. In this paper we propose a mixed structure form of SIC and PIC in order to achieve good performance as well as simple hardware complexity. A performance analysis of the proposed scheme has been made, and the superior characteristics of the mixed structure are demonstrated by extensive computer simulations.
Journal of the Institute of Electronics and Information Engineers
/
v.52
no.5
/
pp.3-9
/
2015
The wireless communication system adopts an appropriate retransmission scheme on each system protocol layer to improve reliability of data transmission. In each system protocol layer, the retransmission scheme operates in independently other layers and operates based on the parameters without reference to end-to-end performance of wireless communication system. For this reason, it is difficult to design the optimal system parameters that satisfy the QoS requirements for each service class. Thus, the performance analysis of wireless communication system is needed to design the optimal system parameters according to the end-to-end QoS requirements for each service class. In this paper, we derive the mathematical model to formulate the end-to-end performance of wireless communication system. We also evaluate the performance at the MAC and transport layers in terms of average spectral efficiency and average transmission delay. Based on the results of performance evaluations, we design the optimal system parameters according to the QoS requirements of service classes. From the results, the HARQ combined with AMC is appropriate for the delay-sensitive service and the ARQ combined with AMC is appropriate for a service that is insensitive to transmission delay. Also, the TCP can be applied for the delay-insensitive service only.
The concept of Smart home is receiving a huge attention as a future living environment because of its advantages for elderly and disabled to maintain their quality of life. Smart home is a place equipped with integration of technology and services and closely intertwined with occupant's lifestyle. Therefore it is critical to consider the user's actual needs for ensuring satisfaction. However despite growing researches on user values for smart home, there have been few studies clearly categorizing smart home service and stating user values depending on characteristics of service. Thus, the aim of this research is to classify smart home services on user's perspective, and reveal user values for each smart home services. Through the in-depth literature review, we elicited technology-related user values and service-related user values, and state classification for smart home service. Also the relationship between user values and each smart home services were revealed. The results of this research should help to reflect user's actual needs for designing smart home services.
Journal of the Korean Society for Marine Environment & Energy
/
v.19
no.1
/
pp.25-36
/
2016
Heavy metals in the stream sediments around Shihwa Lake were studied not only to investigate the characteristics of spacio-temporal distribution but also to assess the pollution degree and ecological risk using various pollution indices. Among metals, Zn had the highest values (1,311 mg/kg) and Hg showed the lowest value (0.261 mg/kg). The order of mean concentrations (mg/kg) of metals was Zn>Cu>Pb>Cr>Ni>Co>As>Cd>Hg in stream sediments around Shihwa Lake. Metal concentrations showed different pollution pattern with industrial region, indicating that these metals originated from different sources and industrial region had higher metal concentration than rural/urban regions. The results of geoaccumulation index (Igeo) showed that the stream sediments were significantly polluted with Cd, Cu, Zn and Pb, indicating moderately to highly polluted by these metals. According to PLI consideration, industrial region was more seriously polluted by metals whereas an rural/urban region was not polluted. About 85% of sampling site for Cr, Ni, Cu, Zn and Pb from industrial regions were exceeded the PEL values. The mPELQ and SQI values derived from PEL of industrial region were classified as 'highly toxic' and 'very poor' and metal pollution level tend to be worse in wet season. This indicates that the industrial activities and stromwater runoff represents an important sources of heavy metals around Shihwa Lake.
The results on the chemical characteristics of the pork fed with fermented feeds are summarized as follows; 1) The pork treated with fermented feeds had lower fat and higher protein content than control pork in proximate compositions. It is considered to be the improvement of the quality. 2) It was not recognized to the difference of oxidation level among the sample porks. 3) Oleic acid was the highest concentration in the components of fatty acid of pork. The rate of the saturated and unsaturated fatty acids is 38.8 % : 59.9 % in the ordinary meat, 40.8 % : 57.8 % in the a high-grade meat, and 36.3 % : 62.0 % in the pork treated with fermented feeds. In addition, the essential fatty acid content of them is 14 %, 11.2 %, and 16.7%, respectively. 4) Glutamic acid was the highest composition in total amino acids and the essential amino acid content was 39% in both an ordinary meat and the pork treated with fermented feeds, and 14 % in high-grade meat. 5) It was no difference in the inorganic content among the samples. The water holding capacity by extraction meat juice was higher to 92 % in the pork treated with fermented feeds and 15.6 % in a loss in quantity by heating than others. Thus, the pork bred with fermented feeds was evaluated to be good in terms of processing and cooking.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.