• 한국환경과학회지
• /
• 제16권5호
• /
• pp.623-632
• /
• 2007

The objective of this study is analysis of Andong-Dam lake water quality with water quality model. Model parameters of the WASP applied to Lake Andong-Dam were estimated. The methodology is based on grouping water quality constituents and relevant parameters and successively estimating parameters by a trial-and-error procedure. Water qualify system for modeling consisted of BOD, DO, T-N, T-P. The results of water quality modelling using WASP. T-N was maximum affected by K71C(Organic nitrogen mineralization rate) parameter. T-P was maximum affected by K83C(Dissolved organic phosphorus mineralization) parameter, and It did not show a difference almost from the parameter of others and it omitted. BOD was maximum affected by Temperature parameter, it was visible of the reaction due to the KDC(Deoxygenation rate) in afterwords, and it did not show a difference from the parameter of others and it omitted. DO was maximum affect by Temperature parameter, and It did not show a difference almost from the parameter of others and it omitted. The parameter which it presumes from the this study uses a water quality modeling and Actual value and the result with which it compares, error rate the parameter presumption which is appropriate with 1% interior and exterior is investigated, It will reach and it uses and it will be able to apply to the suitable parameter in water quality modelling of the objective area which can be feeded by it becomes.

• 품질경영학회지
• /
• 제26권2호
• /
• pp.17-26
• /
• 1998

Taguchi's parameter design is a method for quality improvement by making the performance fo a system robust to noise. Parameter design with dynamic characteristics has been recently the subject of much interest. This paper is concerned with a review and a generalization of the Signal-to-Noise (SN) ratio, a quality measure for parameter design with dynamic characteristics, proposed by Taguchi. We present a method for determination and analysis of the generalized SN ratio and illustrate its implementation by example.

• 대한전자공학회논문지SP
• /
• 제45권3호
• /
• pp.93-102
• /
• 2008

본 논문에서는 동영상의 화질을 일정하게 하기 위한 실시간 비트율 제어 기법을 제안한다. 일정 화질을 만족하기 위한 기존의 비트율 제어 알고리즘은 프레임의 부호화 복잡도를 잔여 신호인 MAD(mean absolute of difference)로 추정하여 비트 할당을 수행하였다. 그러나 MAD는 영상의 특성이나 부호화 파라미터에 따라 동일한 MAD라도 다른 비트를 생성하므로 영상의 부호화 복잡도를 적절히 나타내기 어렵다. 본 논문에서는 이 문제를 해결하기 위해 비트와 MAD사이의 기울기인 모델 파라미터를 프레임의 복잡도의 측도로 보고 이전 프레임과 현재 프레임의 모델 파라미터의 비율로 비트 할당을 수행한다. 또한 기존의 비트-복잡도 모델에서 구한 모델 파라미터는 양자화 파라미터가 변함에 따라 그 값이 크게 변하여 영상의 내재적 복잡도를 나타내기 어렵다. 따라서 본 논문에서는 비트-복잡도 모델에 양자화 파라미터를 추가하여 양자화 파라미터가 변하더라도 영상의 복잡도의 측도인 모델 파라미터는 변하지 않게 하였다. 광범위한 실험결과는 제안한 알고리즘이 기존의 알고리즘에 비해 비슷한 평균 화질을 유지하면서 화질의 변동을 큰 폭으로 줄였음을 보여준다.

• International Journal of Quality Innovation
• /
• 제6권2호
• /
• pp.105-115
• /
• 2005

In recent years, high-speed recording CD-R has already become the mainstream of CD-R market. Therefore, to promote the efficiency of recording CD-R is of significant importance. This study uses Taguchi's parameter design to improve the yield rate for the process of CD-R substrate. We have found 13 three-level controllable factors from the fishbone diagram, repeated 10 times the experiment with the L27(313) orthogonal array, and measured seven quality characteristics. We employ four general methods to find the optimal parameter conditions individually. Then, we perform the confirmation experiment and compare the results. Finally, we obtain the optimal parameter conditions. According to the analysis of benefits, the optimal parameter conditions can reduce the quality loss of CD-R substrate to about 21%. In the future, the results can be extended to other research of DVD-R substrate.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 1998년도 The 12th Asia Quality Management Symposium* Total Quality Management for Restoring Competitiveness
• /
• pp.610-621
• /
• 1998

In parameter design introduced by Taguchi, we analyze a signal-to-noise(SN) ratio. The SN ratio is a function of the expected loss due to the variation of quality characteristic. In this paper, an easy way for developing SN ratios is presented, which can be used to several quality characteristics simultaneously in parameter design. To develop such multivariate SN ratios, the transformation method of the expected loss and combining techniques are employed. And the analysis of real empirical data for an application of the proposed method is also presented.

• 품질경영학회지
• /
• 제27권3호
• /
• pp.67-78
• /
• 1999

In parameter design introduced by Taguchi, we analyze a performance measure, so called SN ratio. The SN ratio is a function of the expected loss due to the variation of quality characteristic. In this paper, an easy way for developing performance measures is presented, which can be used to control several quality characteristics simultaneously in parameter design. To develop such multivariate performance measures, the transformation method of the expected loss and combining techniques are employed. And the analysis of real empirical data for an application of the proposed method is also presented.

• 한국데이터정보과학회:학술대회논문집
• /
• 한국데이터정보과학회 2004년도 춘계학술대회
• /
• pp.131-139
• /
• 2004

Robust parameter design is to identify appropriate settings of control factors that make the system's performance robust to changes in the noise factors that represent the source of variation. In this paper, we introduce a factor analysis approach to simultaneously optimize multiple quality characteristics in the robust parameter design. An example is illustrated to compare it with already proposed method.

• 제어로봇시스템학회논문지
• /
• 제14권11호
• /
• pp.1174-1179
• /
• 2008

Many modeling and calibration methods have been developed to analyze and design the biological wastewater treatment process. For the systematic use of activated sludge model (ASM) in a real treatment process, a most important step in this usage is a calibration which can find a key parameter set of ASM, which depends on the microorganism communities and the process conditions of the plants. In this paper, a standardized calibration protocol of the ASM model is developed. First, a weighted effluent quality index(WEQI) is suggested far a calibration protocol. Second, the most sensitive parameter set is determined by a sensitive analysis based on WEQI and then a parameter optimization method are used for a systematic calibration of key parameters. The proposed method is applied to a calibration problems of the single carbon removal process. The results of the sensitivity analysis and parameter estimation based on a WEQI shows a quite reasonable parameter set and precisely estimated parameters, which can improve the quality and the efficiency of the modeling and the prediction of ASM model. Moreover, it can be used for a calibration scheme of other biological processes, such as sequence batch reactor, anaerobic digestion process with a dedicated methodology.

• 한국통신학회논문지
• /
• 제21권6호
• /
• pp.1480-1489
• /
• 1996

In ATM networks there are two methods in traffic control as schemes advancing the quality of service. One is reactive control after congestion and the other which is generally recommended, is preventive control before congestion, including connection admission control on call leel and usage parameter control, network parameter control, priority control and congestion control on cell level. In particular, usage parameter control is required for restricting the peak cell rate of bursy tracffic to the parameter negotiated at call set-up phase since the peak cell rate significantly influences the network quality of service. The scheme for progressing quality of service by usage parameter control is themethod using VSA(Virtual Scheduling Algorlithm) recommended ITU-T. The method using VSSA(Virtual Scheduling Suggested Algorlithm) in this paper is suggested by considering cell delay variation and token rate of leaky bucket, compared VSA and VSANT(Virtual Scheduling Algolithm with No Tolerance) with VSSA which polices violated cell probability of conformed peak cell rate and intentionally excessive peak cell rate. VSSA method using IPP(Interruped Poisson Process) model of input traffic source showed more quality of service than VSA and VSANT methods as usage parameter control because the suggested method reduced the violated cell probability of contformed peak cell rate and intentionally excessive peak cell rate.

• 품질경영학회지
• /
• 제21권1호
• /
• pp.96-107
• /
• 1993

In parameter design Taguchi analyzed a statistic which he called signal-to-noise(SN) ratio by using the experimental design technique. However he gave no justification for using SN ratios in the optimization procedure of parameter design. In this paper we discuss the validity of such SN ratios as proper statistics to be analyzed in parameter design. Moreover, using the real empirical data we examine the appropriateness of SN ratios, and we explain how transformation technique can be applied in parameter design as an alternative method of analysis.