• Elastomers and Composites
• /
• 제33권4호
• /
• pp.255-266
• /
• 1998

본 연구는 한대의 modular 치합형 동방향회전 이축 압출기에서 음이온 중합 mechanism을 이용하여 Lauryl lactam 단량체의 고분자합성 도중 EPDM을 투입하여 연속적 중합을 수행한 연구이다. PA 12의 반응 도중 EPDM과 반응블렌드(reactive blend)를 하고 기계적블렌드와 그 물성을 비교 측정하였다.

• 한국염색가공학회지
• /
• 제21권5호
• /
• pp.10-15
• /
• 2009

A mixed bi-functional reactive dye has been applied to the cotton and the cotton/hemp blend and their dyeing and fastness properties were compared. The cotton/hemp blend exhibited higher exhaustion values and better build-up property than cotton, presumably due to the lower crystallinity. Hence, the reproducibility of dyeing of hemp is expected to be excellent. Fastness properties of reactive dyes on cotton and cotton/hemp blend are found to be almost identical. The results obtained suggest that hemp in cellulosic fabric could be used as an important alternative to universal cotton in cellulose fabrics.

• Elastomers and Composites
• /
• 제40권3호
• /
• pp.159-165
• /
• 2005

반응성 모노머인 글리시딜메타크릴레이트 (GMA)를 과산화제를 이용하여 저밀도폴리에틸렌(LDPE)에 그라프트 한 후 이를 이용하여 나일론-6와 반응블렌드를 동방향 이축압출기를 사용하여 실시하였다. GMA의 그라프트는 FT-IR을 이용하여 확인하였으며, GMA의 그라프트율은 반응온도, 과산화제의 농도, 공단량체로 사용된 스티렌의 농도가 증가함에 따라 증가함을 알 수 있었다. LDPE/나일론-6 반응블렌드 보다는 LDPE-g-GMA/나일론-6 블렌드의 인장강도 및 신율이 향상됨을 알 수 있었으며, 스티렌이 첨가된 경우 보다 향상된 값을 나타냄을 알 수 있었다. 반응물의 모폴로지는 SEM을 이용하여 측정하였다.

• Fibers and Polymers
• /
• 제3권3호
• /
• pp.85-90
• /
• 2002

Five temporarily solubilized reactive disperse dyes were synthesized and characterized. They were applied to polyester/cotton blend fabric using one-bath dyeing method without dispersing agent. The dye that has azonaphthalene chro-mophore seemed to not only be exhausted on polyester but also react with cotton. But other dyes were selectively dyed on polyester and showed limited uptake on cotton. Good levelling as well as moderate to good colour fastness was obtained with the dyes on P/C blend fabric.

• 공업화학
• /
• 제3권3호
• /
• pp.499-506
• /
• 1992

모노머의 반응성비가 각각 $r_1=0.53$, $r_2=0.44$반응인 styrene과 GMA(glycidyl methacrylate)를 일정 몰비로 반응시켜서 styrene과 GMA의 공중합체인 PGS를 합성한 후, 에틸렌 디아민을 반응시켜서 공중합체내에 아민기를 도입시켰다. 아민기가 도입된 중합체인 NPGS는 PGMA와 블렌드시에 DSC분석 결과, 단일 Tg를 나타내므로 두 폴리머는 상용 성이 있다는 것이 관찰되었다. 이 NPGS-PGMA의 블렌드를 PS-PGMA블렌드물에 일정무게비로 첨가하여서 이에 따른 상용성의 변화를 관찰하였다. 즉, 비상용성인 PS-PGMA블렌드에, 에폭시기와 아민기와의 화학적 반응에 의하여 상용성을 나타내는 NPGS-PGMA블렌드의 첨가에 따른 상용성의 향상을 DSC분석을 통한 Tg변화와 SEM (Scanning electron microscopy)측정에 의한 morphology변화를 통하여서 관찰하였다. 측정 결과, PS-PGMA 블렌드는 NPGS-PGMA 블렌드가 첨가됨에 따라 Tg변화를 나타내었고, PGMA의 PS내에서의 분산은 향상되었다. 따라서, NPGS-PGMA의 블렌드는 PS-PGMA블렌드의 상용성을 향상시키는 상용화제로서의 작용을 하였다.

• Korea-Australia Rheology Journal
• /
• 제13권4호
• /
• pp.169-177
• /
• 2001

Morphological, thermal, rheological, and mechanical properties of reactive compatabilized blends of poly(butylene terephthalate) (PBT) and Polyamide-6 (PA) containing EGMA copolymer were investigated using scanning electron microscopy (SEM), differential scanning calorimetry (DSC), advanced rheometric expansion system (ARES), and universal testing machine (UTM). From the results of thermal analysis by DSC, the melting point of the 30/70 PBT-PA blend was broadened after EGMA was added in the blends, since the enthalpy of melting of the PBT-PA somewhat decreased with the increase of EGMA content. From this result, it is suggested that the EGMA affected to the crystallization behavior and crystallinity of the PBT-PA blends. From SEM micrographs of the 70/30, 50/50, and 30/70 PBT-PA blends, the droplet size of the 30/70 PBT-PA blend was about 0.8 ${\mu}{\textrm}{m}$ which was smaller than that of the 50/50 and 70/30 PBT-PA blends. The complex viscosity of the 30/70 PBT-PA blend observed to be higher than that of the 50/50 and 70/30 PBT-PA blends. From the results of the morphology and rheological properties for the PBT-PA blends, it is suggested that the compatibility is increased in the 30/70 PBT-PA blend than the 50/50 and 70/30 PBT-PA blends. From the results of mechanical properties, it was found that the tensile strength of the 30/70 PBT-PA blend increased with the increase of EGMA up to 2 phr, while tensile strength of the blend in which EGMA content was higher than 2 phr decreased with the increase of EGMA content. From the results of morphological, thermal, rheological, and mechanical properties for the PBT-PA-EGMA blends, it is suggested that the EGMA could be used as a compatibilization role in the blends.

• 한국염색가공학회지
• /
• 제19권3호
• /
• pp.18-25
• /
• 2007

The fixing behaviors of anthraquinone disperse dyes containing dimethylamino substituent, such as C. I. Disperse Violet 26(D.V.26) and C. I. Disperse Blue 14(D.V.14), or containing diamino substituent, such as C. I. Disperse Blue 73(D.B.73), and monochlorotriazinyl azo reactive dyes, such as C. I. Reactive Orange 13(R.O.13), C. I. Reactive Red 3(R.R.3). C. I. Reactive Yellow 2(R.Y.2) on polyester/cotton blend(P/C) fabrics were examined for the one-step printing of P/C fabrics. The high temperature steaming of $175^{\circ}C$ is the most satisfactory fixing method for P/C one-step printing with above disperse and reactive dyes among the four different fixing methods: $175^{\circ}C$ steaming, $102^{\circ}C$ steaming${\rightarrow}175^{\circ}C$ steaming, $190^{\circ}C$ thermosol, $102^{\circ}C$ steaming${\rightarrow}190^{\circ}C$ thermosol. $190^{\circ}C$ thermosol is unfit to fix R.R.3 and R.Y.2 whose heat stability is poor. It was found that D.V.26 and D.B.14 containing dimethylamino substituent are unstable for heat and alkali, but D.B.73 is stable for them to print P/C blend fabrics with R.O.13 which is also stable for heat. Therefore we found that D.B.73, R.O.13 and a pair of D.B.73 and R.O.13 were very suitable for one-step printing of P/C blend fabrics.

• 한국염색가공학회지
• /
• 제22권4호
• /
• pp.332-340
• /
• 2010

Nowadays natural textile materials should cope with the global warming. Soft, thin and light angora fibers which have two components. One is spiky hair and the other is soft hair. The spiky hairs have a disadvantage of pilling out. The soft hairs have promising properties comparable to cashmere goat hairs, which is cheap compared to very expensive cashmere goat hairs. In this study, we investigated the dyeing properties of angora/PET, Nylon blend fabrics to acid dyes and reactive dyes including various series of acid dyes and reactive dyes for the dyeing of the blended super soft angora fabrics and their potential for deep shade dyeing effects. Our focus is to get a relation between various kind of blend and their dyeability.

• 한국염색가공학회지
• /
• 제24권2호
• /
• pp.145-151
• /
• 2012

Polymer alloys of poly(ethylene terephthalate)(PET) and nylon6(PA6) which were not miscible each other by themselves were successfully prepared through melt compounding using a twin-screw extruder by utilizing epoxy as reactive compatibilizer. At the epoxy(DGEBA) amount of 0.5~2wt%, the domain size(average diameter) of the discontinuous phase could be reduced up to 0.2${\mu}m$ from 1-5${\mu}m$ that of the simple blend without epoxy. The reaction was presumed to happen mostly at interphase from the result of maximum increase of melt viscosity at the middle range of PET/PA6 blend ratio. It is expected that alloy fibers of PET/epoxy/PA6 with enough mechanical strength for use can be prepared.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2001년도 가을 학술발표회 논문집
• /
• pp.448-451
• /
• 2001

각각 소수성과 친수성을 나타내는 올레핀계 고분자인 PE 와 granule starch의 blend는 서로 다른 특성에 기인하여 거시적인 상분리 현상이 발현되며 두 물질간에 계면을 형성한다. 이와 같이 낮은 interfacial adhesion을 갖는 내부 구조는 외력에 대한 저항력이 급격히 저하되어 낮은 물성 특성을 나타낸다. (중략)