• Bulletin of the Korean Chemical Society
• /
• v.23 no.1
• /
• pp.23-24
• /
• 2002

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.212-212
• /
• 2011

In addition to the catalysts' activity and selectivity, the deactivation of catalysts during use is of practical importance. It is crucial to understand the phenomena of the deactivation to predict the loss of activity during catalyst usage so that the high operational costs associated with catalyst replacement can be reduced. In this study, the activity of Ru catalysts, such as nanoparticles (3~6 nm) and polycrystalline thin film (50 nm), have been investigated under CO oxidation and oxidative/reductive reaction conditions at various temperatures with the ambient pressure X-Ray photoelectron spectroscopy (APXPS). With APXPS, the surface oxides on the catalyst are measured and monitored in-situ. It was found that the Ru film exhibited faster oxidation-and-reduction compared to that of nanoparticles showing mild oxidative-and-reductive characteristics. Additionally, the larger Ru nanoparticles showed a higher degree of oxide formation at all temperatures, suggesting a higher stability of the oxide. These observations are in agreement with the catalytic activity of Ru catalysts. The loss of activity of Ru films is correlated with bulk oxide formation, which is inactive in CO oxidation. The Ru nanoparticle, however, does not exhibit deactivation under similar conditions, suggesting that its surface is covered with a highly active ultrathin surface oxide. Since the active oxide is more stable as nanoparticles than as a film, the nanoparticles showed mild oxidative/reductive behavior, as confirmed by APXPS results. We believe these simultaneous observations of both the surface oxide of Ru catalysts and the reactivity in real time enable us to pinpoint the deactivation phenomena more precisely and help in designing more efficient and stable catalytic systems.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.4
• /
• pp.375-378
• /
• 2001

The palladium catalyzed dehalogenative homocoupling of haloarylsulfonates under reductive conditions has proceeded selectively depending on the type of the halogen. Thus, an iodo or a bromo leaving group of haloarylsulfonates was homocoupled to gi ve symmetrical biaryls in good yields with the sulfonate group intact, whereas a chloro leaving group gave no reaction under the conditions used. When the more reactive nickel catalyst was employed instead of the palladium catalyst in the reaction, both dehalogenative and desulfonative homocouplings of haloarylsulfonates occurred regardless of the type of the halogen used.

• Bulletin of the Korean Chemical Society
• /
• v.14 no.4
• /
• pp.461-465
• /
• 1993

Reductive transformations of gem-bromonitro compounds and ${\alpha}$-nitro ketones were carried out conveniently with sodium dithionite by using dioctyl viologen as an electron-transfer catalyst in dichloromethane-water two-phase system:the bromine atom in gem-bromonitro compounds and the nitro group in ${\alpha}$-nitro ketones are replaced by hydrogen.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.3
• /
• pp.582-587
• /
• 2010

A rhodium-catalyzed reductive cleavage reaction of carbon-cyano bonds is developed using hydrosilane as a mild reducing agent. A wide range of nitriles, including aryl, benzyl, and $\beta$-hydrogen containing alkyl cyanides are applicable to this decyanation reaction. The method is also applicable to organic synthesis, in which benzyl cyanide is used as a benzyl anion equivalent and a cyano group functions as a removable ortho-directing group.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.2
• /
• pp.401-410
• /
• 2016

The $Pt-Sn/Al_2O_3$ catalysts mixed with metal oxides for propane dehydrogenation were studied. $Cu-Mn/{\gamma}-Al_2O_3$, $Ni-Mn/{\gamma}-Al_2O_3$, $Cu/{\alpha}-Al_2O_3$ was prepared and mixed with $Pt-Sn/Al_2O_3$ to measure the activity for propane dehydrogenation. As standard sample, $Pt-Sn/Al_2O_3$ catalyst mixed with glassbead was adopted. In the case of catalytic activity test after non-reductive pretreatment of catalyst and metal oxide, $Pt-Sn/Al_2O_3$ mixed with $Cu-Mn/{\gamma}-Al_2O_3$ showed higher conversion of 15% and similar selectivity at $576.5^{\circ}C$, compared to conversion of 8% in standard sample. In the case of catalytic activity test after reductive pretreatment of catalyst and metal oxde, $Cu/{\alpha}-Al_2O_3$ showed higer yield than standard sample. But, increase of yield of most of samples after reductive pretreatment was not significant, so it was found that lattice oxygen of $Cu-Mn/{\gamma}-Al_2O_3$ is effective to propane dehydrogenation.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.2
• /
• pp.327-333
• /
• 2009

For the Pt-catalyzed nucleophilic addition of enones, Pt complexes were employed in the presence of various phosphine ligands and $H_2\;(or\;Et_3SiH),$ affording inter- and intra-molecular coupling products in good to modest yield. Depending on reaction protocols, different phosphine ligands were required to optimize the conditions. In the aldol reaction, the Pt catalyst involving $P(2,4,6-(OMe)_3C_6H_2)3\;or\;P(p-OMeC_6H_4)_3$ was chosen. Michael reaction proceeds in good yields in the presence of $P(p-CF_3C_6H_4)_3$. Regarding the activity of the reductants, $H_2$ exhibited superior activity to $Et_3SiH$, resulting in a shorter reaction time and higher yield in the aldol and Michael reaction. In light of the deuterium labeling studies, the catalytic cycle including the hydrometalation of the enones by the platinum hydride species was proposed.

• Advances in environmental research
• /
• v.3 no.2
• /
• pp.151-162
• /
• 2014

Among the combination of 4 different second metals and 3 different noble metals, Ni 10%-Pd 1%/hematite (Ni(10)-Pd(1)/H) showed best tetrachloroethylene (PCE) removal (75.8%) and production of non-toxic products (39.8%) in closed batch reactors under an anaerobic condition. The effect of environmental factors (pH, contents of Ni and Pd in catalyst, and hydrogen gas concentration) on the reductive dechlorination of PCE by Pd-Ni/hematite catalysts was investigated. PCE was degraded less at the condition of Ni(5)/H (13.7%) than at the same condition with Ni(10)/H (20.6%). Removals of PCE were rarely influenced by the experimental condition of different Pd amounts (Pd(1)/H and Pd(3)/H). Acidic to neutral pH conditions were favorable to the degradation of PCE, compared to the alkaline condition (pH 10). Increasing Ni contents from 1 to 10% increased the PCE removal to 89.8% in 6 hr. However, the removal decreased to 74.2% at Ni content of 20%. Meanwhile, increasing Pd contents to 6% showed no difference in PCE removal at Pd content of more than 1%. Increasing H2 concentration increased the removal of PCE until 4% H2 which was maximumly applied in this study. Chlorinated products such as trichloroethylene, 1,1-dichloroethylene, cis-1,2-dichloroethylene, trans-1,2-dichloroethylene, and vinyl chloride were not observed while PCE was transformed to acetylene (24%), ethylene (5%), and ethane (11%) by Ni(10)-Pd(1)/H catalyst in 6hr.

• Journal of Integrative Natural Science
• /
• v.8 no.4
• /
• pp.235-243
• /
• 2015

Rhodium(I)-complex of $[Rh(CO)_2I_2{^-}]$ catalyzed carbonylation of anhydrous-trimethylamine in the presence of methyl iodide to give DMAC (N,N-dimethylacetamide) in no solvent. The catalyst had been reused 20 times, the analyses and distillation of collected products showed that the yields of DMAC, MAA (N-methylacetamide), and DMF (N,N-dimethylformamide) were 82.3%, 12.6%, and 4.4%. The conversion rate of trimethylamine was 99 % and the selectivity of DMAC was 82.3% with TON (Turnover Number) of 700. Stepwise procedure of inner-sphere reductive elimination for the formation of DMAC was suggested instead of acyl iodide intermediate.

• Elastomers and Composites
• /
• v.50 no.4
• /
• pp.274-278
• /
• 2015

Nanosized gold particles were synthesized by microwave irradiation in a mixture composed of potassium tetrachloroaurate(III) n-hydrate, sodium citrate dihydrate and Tween 20. The synthesized gold particles were characterized by UV-vis spectrophotometer, scanning electron microscopy, and X-ray diffraction techniques. Using UV-vis spectroscopy, it was confirmed that gold nanoparticles act as a catalyst in the reduction of 4-nitroaniline with sodium borohydride to form 1,4-diaminobenzene. Additionally, we studied the kinetics of this reductive reaction in the presence of these gold nanoparticles under various conditions.