• 한국세라믹학회지
• /
• 제34권7호
• /
• pp.693-698
• /
• 1997

The refractive index and dispersion in the (100-x)(0.6CaO.0.4Al2O3).xSiO2(x=0~30) glasses were investigated. As the amount of SiO2 increased, the refractive index decreased. The change of refractive index was attributed to the change of the molar refraction rather than the molar volume. When the amount of SiO2 was smaller than 20 mol%, the average electronic transition energy gaps(E0) and the electronic oscillator strengths(Ed) were about 10.9($\pm$0.1) nd 18($\pm$0.5)eV, respectively. However E0 and Ed of the glass (CAS30) with 30 mol% SiO2 increased to 12.63 and 19.89eV, respectively. The similar results was observed in the variation of Abbe Number. Abbe number of the glass in the range of 0~20 mol% SiO2 was about 46 and that of CAS30 increased to 60. The zero-material dispersion wavelength({{{{ lambda }}0) of pure calcium aluminate glass was 1.8 ${\mu}{\textrm}{m}$. As the amount of SiO2 increased, the zero-material dispersion wavelength shifted to a shorter wavelength. {{{{ lambda }}0 of CAS30 was 1.5 ${\mu}{\textrm}{m}$, that is currently using for the optical telecommunication system.

• Transactions on Electrical and Electronic Materials
• /
• 제13권4호
• /
• pp.196-199
• /
• 2012

CdS thin film was prepared on glass substrate by chemical bath deposition in an alkaline solution. The optical properties of CdS thin film were investigated using spectroscopic ellipsometry. The real (${\varepsilon}_1$) and imaginary (${\varepsilon}_2$) parts of the complex dielectric function ${\varepsilon}(E)={\varepsilon}_1(E)+i{\varepsilon}_2(E)$, the refractive index n(E), and the extinction coefficient k(E) of CdS thin film were obtained from spectroscopic ellipsometry. The normal-incidence reflectivity R(E) and absorption coefficient ${\alpha}(E)$ of CdS thin film were obtained using the refractive index and extinction coefficient. The critical points $E_0$ and $E_1$ of CdS thin film were shown in spectra of the dielectric function and optical constants of refractive index, extinction coefficient, normal-incidence reflectivity, and absorption coefficient. The dispersion of refractive index was analyzed by the Wemple-DiDomenico single-oscillator model.

• 한국세라믹학회지
• /
• 제46권1호
• /
• pp.10-15
• /
• 2009

We have fabricated silicon-rich silica thin films via RF magnetron sputtering using a SiO target. Thickness evolution and microstructure change of such $SiO_x$ (1$SiO_x$ thin films turned out to be mainly responsible for the increase of refractive index.

• 한국재료학회지
• /
• 제27권1호
• /
• pp.1-7
• /
• 2017

Zirconia nanoparticles were widely used as filler in order to get high refractive index layer. However, dispersion of nanoparticles is difficult due to their agglomeration in solvent. In this study, the dispersibility of the zirconia suspension is promoted by controlling the steric hindrance and electrostatic interactions through the adsorption of PEI according to alkali treatment time. Also, to induce improved dispersibility on suspension, we changed the dispersion conditions variously and fabricated an ink formulation method for the coating layer. Zirconia suspension was characterized by dynamic light scattering (DLS), Zeta potential measurement, Transmission Electron Microscope (TEM) and FT-IR. We were able to confirm that good dispersion of zirconia suspension by alkali treatment and PEI led to high refractive index.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.230-230
• /
• 2006

Density functional theory (DFT) calculations using the B3LYP hybrid functional and the 6-311++G(d,p) basis set have been performed to predict the wavelength dispersion of optical absorbance and refractive indices for organic compounds and polymers in the range between the vacuum UV (${\sim}157\;nm$) and near-IR (${\sim}850\;nm$). The DFT calculations can reproduce the experimental dispersions of absorbance and refractive indices with high accuracy and low costs. The calculated dispersions demonstrate that the judicious introductions of $-F\;and\;-CF_{3}$ into alicyclic and heterocyclic compounds are effective in reducing the absorption at shorter wavelengths. In addition, the calculated Abbe numbers that represent the refractive index dispersion in the visble region are linearly proportional to the calculated refractive indices at 589 nm.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 춘계학술대회 논문집
• /
• pp.73-76
• /
• 1995

In this study, the slab waveguide was fabricated using potassium-nitride(KNO$_3$) or silver-nitride (AgNO$_3$) molten sources by ion-exchange process. The effective refractive indices of waveguide were measured by Prism-Coupling method. and The characteristics of waveguide(mode dispersion, effective diffusion depth. surface refractive index, diffusion coefficient, and refractive index profile etc,) were investigated by WKB method, In the case of potassium ion-exchange, the computer calculation showed that the refractive index profile of waveguide followed Gaussian function, the surface refractive index increased with ion-exchange time and the effective diffusion depth increased a little as ion-exchange time increased, while the surface refractive index of silver ion-exchanged waveguide decreased with ion-exchange time because of the ion depletion on the surface of waveguide, and the effective diffusion depth seriously with ion-exchange tim. Double ion-exchanged waveguide was fabricated by performing silver ion-exchange after potassium ion-exchange. Double ion-exchanged waveguide had a tight mode binding force since the surface refractive index was larger than single step ion-exchanged waveguide.

• 한국광학회지
• /
• 제14권3호
• /
• pp.266-271
• /
• 2003

수 $\mu\textrm{m}$ 이상의 두께를 가지는 비교적 두꺼운 박막의 경우 박막에 의한 간섭효과로 인하여 나타나는 반사율 스펙트럼에서의 진동주기로부터 막의 두께를 얻는다. 대개 빠른 데이터 처리를 위해서 고속 푸리에 변환(Fast Fourier Transformation, FFI)을 사용하여 진동주기(또는 진동수)를 구한다. 본 연구에서는 반사율 또는 투과율 스펙트럼을 빛의 에너지 축상에서 푸리에 변환하는 종래의 방법을 개선하여 박막의 굴절률 분산을 반영하는 수정된 고속 푸리에 변환 방법을 최초로 도입하였다. 이 새로운 방법은 굴절률 분산에서 유래하는 유효굴절률 결정에서의 오차를 줄여주고 푸리에 변환 피크의 폭 넓어짐을 막아줌으로써 막 두께 결정의 정밀도를 크게 향상시킨다. 수정된 고속 푸리에 변환방법을 80 $\mu\textrm{m}$의 덮게층과 13 $\mu\textrm{m}$의 사이층이 있는 시료의 반사 스펙트럼에 적용하여 고 타당성을 확인하였다.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1987년도 춘계학술발표회 논문집
• /
• pp.180-183
• /
• 1987

In this paper mimimm desperaioms of atep index single mode sptical fibers manufzctrured by the phase madulatiem method.From them we find that the caloulated data agree closely with the resulte measured at the wavelength around 1.3 um and that a method to shift sere dispersion wavelength at the wavelenghth around 1.55 um is to control refractive index profile and relative refractive difference

• 한국광학회지
• /
• 제8권4호
• /
• pp.277-282
• /
• 1997

광학소자나 전자소자의 코팅에 많이 이용되고 있는 Diamond-like Carbon(DLC) 박막의 복소굴절율을 광학적 방법을 사용하여 구하였다. PECVD(Plasma enhanced CVD)법에 의해 Si(100)기판과 비정질실리카 기판위에 각각 성장시킨 DLC 박막을 분광타원해석기와 분광광도계를 이용하여 타원해석 스펙트럼과 광투과율 스펙트럼을 측정하고, Sellmeier 분산관계식과 양자역학적 진동자 모델을 이용하여 분석하였다. 비정질실리카 위에 증착된 DLC 박막의 광투과영역에서 분광타원해석분석으로 굴절률 및 박막의 유효두께를 구하고 광흡수영역에서 투과스펙트럼을 역방계산하여 소광계수를 구한 뒤, 이 소광계수 스펙트럼에 최적 근사하는 양자역학적 분산식의 계수들을 회귀분석법으로 결정하여 복소굴절율을 구하였다. 그리고 모델링방법을 타워해석 스펙트럼에 적용하여 Si기판과 비정질이산화규소 기판위에 증착된 DLC 박막의 조밀도, 표면거칠기 등 박막상수를 박막의 성장조건에 따라 분석하였다.

• 한국전기전자재료학회논문지
• /
• 제27권3호
• /
• pp.195-198
• /
• 2014

In this paper, a measurement method to obtain the optical properties of a liquid base on a side-polished single mode fiber was proposed and demonstrated. The device showed periodic resonance coupling against wavelengths. The refractive index and dispersion characteristics of a liquid were calculated by use of the spacings of periodic resonance wavelengths of the device. The thermo-optic coefficient of the liquid was obtained by monitering the shift of resonance wavelengths of the devices with change of environmental temperature.