• Korean Journal of Acupuncture
• /
• v.21 no.4
• /
• pp.31-41
• /
• 2004

Background : The cun measurement system, an essential and convenient method in locating acupoints, has been widely used in the practice of acupuncture. However, traditional cun measurement has been criticized for its lack of reliability. Objectives : The purposes of this study are to determine if one cun measured by the directional methods have a consistency with that of proportional methods and to investigate which factors are related with these differences, especially in forearm. Methods : The distance between the elbow crease and the wrist crease of forearm was compared to a reference value of one cun obtained by the directional method. In this method, one cun is one third of the distance between index finger and small finger of a subject, measured at proximal interphalangeal joint. In addition, to investigate the factors influencing the differences between these two methods, we measured the height and body weight and calculated body mass index (BMI). Finally we analyzed the factors correlated with these lengths by linear regression test. Results : The results showed that one cun obtained by the directional methods were significantly different from one cun by the proportional methods in forearm. It was demonstrated that the length acquired with the directional method was more correlated with body weight and body mass index, while the length obtained by the proportional method was more correlated with the height. Conclusion : These findings suggest that the directional method is less likely dependable in locating acupoints than the proportional method because the influencing factors are different.

• Journal of Korean Society on Water Environment
• /
• v.34 no.2
• /
• pp.183-201
• /
• 2018

The tolerance of Korean benthic macroinvertebrates to organic pollution has been analyzed since the early 1990s. However, considering the fact that there have been related studies carried out in some European countries since the early 20th century, the history of the research in Korea is very short and there is still much knowledge to supplement. We revised the saprobic valency, the saprobic value and the indicator weight value of 190 benthic macroinvertebrates taxa through the data of water quality and individual abundance collected from 7,086 sampling units in Korea from 2008 to 2014. The individual abundance of Uracanthella (Ephemeroptera) as a representative, one of the most common and abundant taxa in Korea, showed a typical lognormal distribution to 5-day biochemical oxygen demand (BOD5) concentration, and a normal distribution to the class interval of BOD5 concentration according to saprobic series. The value combining the mean individual abundance and the relative frequency of occurrence was a more efficient indicator value than that of each property alone. Benthic Macroinertebrates Index (BMI) was newly proposed as a modification of the saprobic index of Zelinka and Marvan (1961). BMI showed extremely significant correlation (determination coefficient $r^2$ > 0.6, n = 569 sites) with the concentration of BOD5, and the coefficient was a little higher than those of the previous indices. Until now, there has been very little research on the assessment of biological integrity of benthic macroinvertebrates community in Korea. While continuing researches into improve the reliability of BMI, it is necessary to develop multimetric indices for evaluating the integrity, including the composition of species and functional guilds, and the richness and diversity of the community.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.11
• /
• pp.1443-1451
• /
• 2008

This study was performed to develop menu satisfaction index in Business & Industry (B&I) food service and to survey customer's menu satisfaction using the index. The menu satisfaction index included 16 items with Likert 5 point. Cronbach's alpha to assess the internal reliability of the developed scales was 0.8917, which indicated highly reliable. Construct validity was assessed by principal components analysis and then four factors explaining 65.964% of the total variance were found. Among the 15 items of menu satisfaction, the average scores of all items were above 3.0 out of 5. As a result of analysis on menu satisfaction factors, 'propriety of food temperature' (3.52 out of 5) was the highest consideration followed by 'sufficiency of format' (3.46), 'excellence in food' (3.35) and 'well-being orientation' (3.31). It could be said that customer's perception on the menu quality was very positive. Four factors were correlated with overall menu satisfaction positively. Especially, 'excellence in food', and 'well-being orientation' and 'sufficiency of format' affected significantly on overall menu satisfaction. It concluded that customers were satisfied with portion size, temperature, price but their needs for taste and health/nutrition-related service would be increased. The menu satisfaction developed in this study should be applied to other B & I food service operation by type.

• Korea Journal of Hospital Management
• /
• v.10 no.4
• /
• pp.23-50
• /
• 2005

The main objectives of this study are to compare the regional differences and to analyse the affecting factors of customer satisfaction. The subjects are 9 hospitals(5 Daegu region, 4 Seoul region) patient satisfaction index that were surveyed the 2004 Hospital Accreditation Program performed by KHIDI(Korea Health Industry Development Institute) and MOHW(Ministry of Health and Welfare). The sample used in this study consisted of 450 inpatients and 454 outpatients. The survey instrument is composed of physical environment items, physician factors, nursing staff factors, ancillary staff factors, administrative procedure items, and quality of hospital stay items. And overall satisfaction, intent to revisit, and intent to recommend as dependent variables are measured. Basically, the reliability and validity of survey items was evaluated. And the T-test was performed to compare regional differences of customer satisfaction. Finally to analyse the affecting factors on overall satisfaction, and customer loyalty(intent to revisit and intent to recommend), the multiple regression analysis was used. This study shows firstly, the Daegu region's patient satisfaction level of inpatients and outpatients is lower than Seoul region. Especially, nursing staff factors and quality of hospital stay items are very low on inpatient's satisfaction. Also all independent variables except the sufficiency of goods in hospital stand are very low on outpatient's satisfaction. Secondly, as a result of multiple regression analysis, ancillary staff factors(Beta=0.281) have a significant effect on overall satisfaction of inpatient cases in Daegu region. In regard to intent to revisit and intent to recommend, physical environment factors have a significant effect. Thirdly, in Seoul region, physical environment factors(Beta=0.430) have a significant effect on overall satisfaction of inpatient cases. In regard to intent to revisit and intent to recommend, administrative procedure items and nursing staff factors have a significant effect, respectively. In conclusion, these results indicate that hospitals in Daegu region make an effort to improve the customer satisfaction level, especially, of physical environment factors on inpatients and administrative procedure factors on outpatients

• Korean Journal of Applied Biomechanics
• /
• v.25 no.4
• /
• pp.441-451
• /
• 2015

Objective : The purpose of the study was to investigate and compare the differences between Parkinson's disease rating, balance, fall and gait scales. Results : Parkinson's disease rating scales include the Hoehn-Yahr Scale and the Unified Parkinson's Disease Rating Scale (UPDRS). The Hoehn-Yahr Scale can measure disease rates easily; however it is not sensitive enough to evaluate the disease's process and management. UPDRS's advantage is in it's higher inter-reliability score; however it is more complicated to use. Parkinson's balance scales are comprised of the Berg Balance Scale (BBS) and the Activities-Specific Balance Confidence Scale (ABC). BBS has the advantage in that it is cheaper to measure and simple in use. ABC's advantage is especially in it's ability to measure higher functional levels; however it is more difficult measure responses due to scores appearing in both extremes. The Fall Efficacy Scale (FES) and The Survey of Activities and Fear of Falling in the Elderly (SAFE) are Parkinson's fall scales. FES's leverage over SAFE is that it is simpler to measure; however it does not coincide with responses which proves disadvantageous in measuring balance loss in high-level Parkinson's patients. SAFE's advantage is in it's simpler use and ability to be utilized without encountering the fear of fall; however it's at a disadvantage in regards to its use with multilateral aspects providing insufficient inspection. Lastly, the Dynamic Gait Index (DGI) and the Functional Gait Assessment (FGA) are Parkinson's gait scales. DGI is advantageous in its ability to test gait ability when exposed to a variety of external environments; however it is disadvantageous in that it registers higher scores with activities. FGA's advantage is in it's dynamic balance test; however it at a disadvantage with those unable to walk. Conclusion : A researcher of Parkinson's patients must choose each scale while considering their positive and negative characteristics.

• Structural Engineering and Mechanics
• /
• v.47 no.5
• /
• pp.643-660
• /
• 2013

In the present work, the capacity ratings of steel truss bridges have been carried out incorporating dynamic effect of moving vehicles and its accumulating effect as fatigue. Further, corrosion in the steel members has been taken into account to examine the rating factor. Dynamic effect has been considered in the rating procedure making use of impact factors obtained from simulation studies as well as from codal guidelines. A steel truss bridge has been considered to illustrate the approach. Two levels of capacity ratings- the upper load level capacity rating (called operating rating) and the lower load level capacity rating (called inventory rating) were found out using Load and Resistance Factor Design (LRFD) method and a proposal has been made which incorporates fatigue in the rating formula. Random nature of corrosion on the steel member has been taken into account in the rating by considering reduced member strength. Partial safety factor for each truss member has been obtained from the fatigue reliability index considering random variables on the fatigue parameters, traffic growth rate and accumulated number of stress cycle using appropriate probability density function. The bridge has been modeled using Finite Element software. Regressions of rating factor versus vehicle gross weight have been obtained. Results show that rating factor decreases when the impact factor other than those in the codal provisions are considered. The consideration of fatigue and member corrosion gives a lower value of rating factor compared to those when both the effects are ignored. In addition to this, the study reveals that rating factor decreases when the vehicle gross weight is increased.

• Journal of Korean Ophthalmic Optics Society
• /
• v.10 no.4
• /
• pp.267-272
• /
• 2005

We deposited thin films of organic light-emitting-material $Alq_3$(alumina quinoline) on silicon and slide-glass substrates using thermal evaporation method, and measured spectra of ellipsometry angles ${\Delta}$ and ${\Psi}$ in the photon-energy range of 1.5~5.0 eV using a variable angle spectroscopic ellipsometer. The optical constants, refractive index and extinction coefficient, of $Alq_3$ were determined via the dispersion parameters extracted from the curve-fitting process based on Jellison-Modine dispersion function. The reliability of determined optical constants were verified through the comparison of measured and simulated transmittance curves and the good agreement between simulated absorption-coefficient curves and absorbance spectra measured using a spectrophotometer.

• Journal of the Korean Chemical Society
• /
• v.55 no.5
• /
• pp.733-740
• /
• 2011

Multiple regression analysis was used for the calculation of pKa values of 15 substituted benzaldoximes by using various types of descriptors as parameters. These descriptors are based on quantum mechanical treatments. They were derived by employing semi-empirical calculation represented by the PM3 model and an Abinitio method expressed by Hartree-Fock(HF) model performed at the 6-311 G(d, p) level of theory. The parameters tested for their ability to represent the variations observed in the experimental pKa(s) are atomic and structural properties including Muliken charges on the atoms of hydroxyl group and C=N bond, the angle $C_6-C_1-C_7$, and length of O-H bond. Molecular properties are also used like energies of HOMO and LUMO, hardness(${\eta}$), chemical potential(${\mu}$), total energy(TE), dipole of molecule(DM), and electrophilicity index(W). The relation between pKa values and each of these parameters of the studied compounds is investigated. Depending on these relations, two sets of parameters were constructed for comparison between the PM3 and HF methods. The results obtained favor the Abinitio method for such applications although both models proved to have high predictive power and have sufficient reliability to describe the effect of substituents on pKa values of benzaldoxime compounds under consideration which is clear from the values of correlation coefficient $R^2$ obtained and the consistency between the experimental and the calculated values.

• Journal of Digital Convergence
• /
• v.12 no.1
• /
• pp.405-414
• /
• 2014

It is very important to IT users that the Cloud service provides dynamic extension of IT resources and cost-saving. However, the reliability for Cloud service hinders utilizing Cloud service actively. Existing studies on assessment program for Cloud Service are executed by extracting information security assessment articles and adding features of cloud services by referencing ISO/IEC 27001:2005. This paper will review the recently released ISO/IEC 27001:2013 for the addition, reduction, and changing of articles for Controls and Control objectives. Comparative analysis for the Controls of ISO/IEC 27001:2013 with those of CSA CCMv.3, FedRAMP which is an assessment program for Cloud service will suggest Control Objects of Information Security Management System for related Cloud service. The suggestion of Controls will be an important reference index for the security policy of companies which manage the information security management system based on Cloud service.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.3
• /
• pp.18-29
• /
• 2016

For most organizations, a security infrastructure to protect company's core information and their technology is becoming increasingly important. So various approaches to information security have been made but many security accidents are still taking place. In fact, for many Korean companies, information security is perceived as an expense, not an asset. In order to change this perception, it is very important to recognize the need for information security and to find a rational approach for information security. The purpose of this study is to present a framework for information security strategies of companies. The framework classifies companies into eight types so company can receive help in making decisions for the development of information security strategy depending on the type of company it belongs to. To develope measures to classify the types of companies, 12 information security professionals have done brainstorming, and based on previous studies, among the factors that have been demonstrated to be able to influence the information security of the enterprise, three factors have been selected. Delphi method was applied to 29 security experts in order to determine sub items for each factor, and then final items for evaluation was determined by verifying the content validity and reliability of the components through the SPSS analysis. Then, this study identified characteristics of each type of eight companies from a security perspective by utilizing the developed sub items, and summarized what kind of actual security accidents happened in the past.