• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.7
• /
• pp.1293-1298
• /
• 2011

This paper presents an Unified Index which can evaluate a performance of a distribution system based on value-based methodology. Reliability cost and voltage sags cost are calculated for each load point using Reliability Sector Customer Damage Function(SCDF). Aging cost is calculated for each load point using Aging SCDF. Power loss cost and operation cost are calculated for the system. By summation of each cost of load point and system, power quality cost can be obtained. Finally, this paper developed an unified index which can show the performance of a distribution system. Presented method has been applied to a real system, the usefulness of the method has been verified.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.10
• /
• pp.61-76
• /
• 2015

Recently, geotechnical engineering researches have been conducted on the Limit State Design (LSD) for deep and shallow foundations; however, there are very few studies on the retaining wall. As a basic study for the introduction of the LSD of a railway retaining wall, this study evaluates whether the reliability index satisfies the target reliability index for each failure mode in the standard drawing of the retaining wall. It also analyzes the feasibility of the LSD method by using the Load and Resistance Factor Design (LRFD) for the standard drawing of a retaining wall. In a portion of the standard drawing of the railway retaining wall, the reliability indices of the sliding and bearing capacity failure modes did not satisfy the target reliability index, and could not satisfy the limit state by the LRFD. Hence, the standard drawing of the railway retaining wall will need to be revised if the LSD is to be applied.

• Proceedings of the KIEE Conference
• /
• 1999.11b
• /
• pp.213-215
• /
• 1999

This paper presents a transmission cost allocation through application of a new reliability index in transmission pricing in competitive electric industry. The proposed method allocates a fair use of transmission system charge given separately to individual generator by capacity usage, based on the contribution of individual generator considering N-1 contingency in reliability margin of transmission capacity, and offers more alternatives of pricing in using transmission capacity and transmission margin.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1994.04a
• /
• pp.199-208
• /
• 1994

One of the main objectives of the study is to propose a practical but realistic limit state model considering combined effect of axial and bending load for reliability analysis and safety assessment of cable-stayed bridge under vehicle traffic loads. This paper is intended to propose a new approach for the evaluation of reserved load carrying capacity of cable-stayed bridge under vehicle traffic loads in terms of equivalent strength, which may be defined as a bridge strength corresponding to the reliability index of the bridge. This can be derived from an inverse process based on the concept of FOSM form of reliability index. AFOSM and IST methods are used for the reliability analysis of the proposed models. The proposed reliability model and methods are applied to the safety assessment of Jindo Bridge which is one of major two cable-stayed bridges in Korea.

• Journal of Magnetics
• /
• v.17 no.1
• /
• pp.46-50
• /
• 2012

A reliability-based optimization method for electromagnetic design is presented to take uncertainties of design parameters into account. The method can provide an optimal design satisfying a specified confidence level in the presence of uncertain parameters. To achieve the goal, the reliability index approach based on the firstorder reliability method is adopted to deal with probabilistic constraint functions and a double-loop optimization algorithm is implemented to obtain an optimum. The proposed method is applied to the TEAM Workshop Problem 22 and its accuracy and efficiency is verified with reference of Monte Carlo simulation results.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.1
• /
• pp.46-50
• /
• 2012

The current paper presents an effective methodology for assessing the reliability of electromagnetic designs when considering uncertainties of design variables. To achieve this goal, the reliability index approach based on the first-order reliability method is adopted to deal with probabilistic constraint functions, which are expressed in terms of random design variables. The proposed method is applied to three different designs of a superconducting magnetic energy storage system that corresponds to initial, deterministic, and roust designs. The validity and efficiency of the method is investigated with reference values obtained from Monte Carlo simulation.

• Physical Therapy Rehabilitation Science
• /
• v.7 no.2
• /
• pp.61-66
• /
• 2018

Objective: Patellofemoral pain syndrome (PFPS) is a condition that is characterized by patellar discomfort or pain that is aggravated during certain activities such as ascending/descending stairs. The Patellofemoral Disability Index (PDI) was developed to assess the effect of pain on functional activities in individuals with PFPS. The objectives of the current study were to determine the internal consistency, test-retest reliability, and validity of this index. Design: Cross-sectional study. Methods: Forty-one subjects who had PFPS with a mean age of $28.8{\pm}5.0years$ and a mean body mass index of $25.6{\pm}4.7kg/m^2$ participated in the study. All subjects were concurrently enrolled in a clinical trial for which they were instructed to complete hamstring-resistance exercises for 4 weeks. Over the course of the intervention, they completed both the PDI and the Oswestry Disability Index (ODI) at baseline after two weeks, and after four weeks. Pearson correlation coefficient was used to assess the criterion validity. Cronbach's ${\alpha}$ was used to examine the internal consistency. Intraclass correlation coefficients with 95% confidence interval were computed to examine test-retest reliability. Results: Subjects' responses within both the PDI and the ODI yielded Pearson correlation coefficient values that were positive and highly significant (range, 0.73-0.97; p<0.001). There was a high level of internal consistency (Cronbach's ${\alpha}{\geq}0.8$), with the exception of stair climbing (Cronbach's ${\alpha}=0.65$). Intraclass correlation ranged from 0.87 to 0.92, indicating high levels of test-retest reliability. Conclusions: The PDI is a valid, reliable, and feasible method of assessing pain and functional ability in patients with PFPS.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.2
• /
• pp.121-128
• /
• 2005

This study focuses on evaluating the reliability index of a deck of RC slab having chloride contamination and studying the relation of grades of rebar corrosion and the reliability index of a bridge deck For this purpose, first, the failure probability related to flexural strength was calculated using a model for deterioration, which contains the application of deicing salts that usually causes significant long-term deterioration and reduction in the structural safety for strength of structure. And also, according to the depth of covering, the chloride contents depending on time due to depths of RC slab deck, the appearance time for initial corrosion of rebar and the occurrence time for split of covering were investigated using a MCS method.

• Proceedings of the Korea Contents Association Conference
• /
• 2016.05a
• /
• pp.387-388
• /
• 2016

Kwon (2015) was developed Employment Promotion Tool for Persons with Disabilities in the Aspect of the Quality of Life(QOL-EPAT). But its reliability and validity have not been verified yet. Therefore, this study aimed to verify the reliability, content validity and construct validity of QOL-EPAT. This study was conducted with a disability employment specialists. Period May to October 2015, six months, was distributed to collect the questionnaire. Reliability of QOL-EPAT was estimated using the internal consistency method; both the coefficient of Cronbach's ${\alpha}$ were over 0.7. Construct Validity; Construct validity was verified using structural equation modeling (SEM). Goodness of fit index (GFI), Adjusted goodness of fit index (AGFI), comparative fit index (CFI), tucker-Lewis index (TLI) and root mean square error of approximation (RMSEA) are the suitability indices of SEM. As the result, GFI=0.898; AGFI=0.844; CFI=0.961; TLI=0.949 and RMSEA=0.069. The validity was verified because the values of GFI, AGFI, CFI, TLI and RMSEA were within the goodness-of-fit range. Thus, impaired employs promoters of Japan also provided which allows for analysis of the policy by using a validated scale.

• Journal of Applied Reliability
• /
• v.2 no.1
• /
• pp.33-45
• /
• 2002

We investigate into some problems related to Corruption Perception Index(CPI). Delphi method is a popular for obtaining CPI; it is a mean of systematically collecting and progressively refining information provided by a group of selected experts in order to obtaining the weight values of questionnaires. However, Delphi method hold low aspect, to some extent, for it is solely dependent upon the judgment of a few professionals. In this paper, we propose the measurement model for X in LISREL as alternative for gaining the weight values of questionnaires. We use the 1999 Seoul ACI(Anti- Corruption Index) for empirical study.