• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.1
• /
• pp.32-39
• /
• 2018

Repairing timing and the extended service life with repairing are very important for cost estimation during operation. Conventionally used model for repair cost shows a step-shaped cost elevation without consideration of variability of extended service life due to repairing. In the work, RC(Reinforced Concrete) Column is considered for probabilistic evaluation of repairing number and cost. Two mix proportions are prepared and chloride behavior is evaluated with quantitative exterior conditions. The repairing frequency and cost are investigated with varying service life and the extended service life with repairing which were derived from the chloride behavior analysis. The effect of COV(Coefficient of Variation) on repairing frequency is small but the 1st repairing timing is shown to be major parameter. The probabilistic model for repairing cost is capable of reducing the number of repairing with changing the intended service life unlike deterministic model of repairing cost since it can provide continuous repair cost with time.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.7
• /
• pp.547-554
• /
• 2020

Airborne health management system prevents functional failure caused by errors or faults in the airborne software. On-the-fly repairing atomicity violations (AV) in an ARINC-653 concurrent software is critical for guaranteeing correctness of execution of the software. This paper proposes Repairing-AV which efficiently repairs atomicity violations. The Repairing-AV can diagnose and prevent an error on-the-fly by utilizing the training results of the software and controls access to the shared variable of the thread where the error occurred. The evaluation of the Repairing-AV measures the time overhead by applying the previous work and the Repairing-AV to five synthesis programs containing the atomicity violation. As the result of evaluation, the RepairingAV constantly shows about 1.4x time overhead regardless of count of shared variable access.

• Journal of the Korean Institute of Rural Architecture
• /
• v.12 no.4
• /
• pp.1-11
• /
• 2010

This study is a research examining reshaped pattern in the perspective of repairing parts and materials through repairing renovation of registered cultural properties constructed in modern times and results are as followings. Repairing construction of registered cultural properties of Jollanamdo according to parts is shown numerously in the order of roof, walls and windows, and mostly outworn as time passes on and leakage were the main cause of repair. Also when original shape was damaged by previous repair in the past, and this was another reason of repairing. It was surveyed that among the repairing job repair of damage occurred on the part of roofing area including water leakage, corrosion and damage of roofing material, and damage of groove channel were the most main cause of repair. Especially when roof leakage is occurred by outworn of roofing materials, this cause corrosion and damage of materials due to the damage of leakage parts and this cause repeating cycles of worse leakage again and again. Main repairing materials which deform the original shape of registered cultural properties were confirmed as copper plate used on the roof. Copper plate showing high frequency of application which replaces groove slate or cement roofing tile used on the roof before has high durability and anti-corrosion but it is considered improper material to recover original shape.

• 대한공업교육학회지
• /
• v.38 no.1
• /
• pp.239-258
• /
• 2013

The purpose of this study is to define what circuit repairing ability is and to check improvement in learner's circuit repairing abilities by verifying conformity of learner's achievement of target goals that have been derived from headlight assignment based on circuit repairing ability that has been categorized into six sub-factors, which are preparing ability, attaching/detaching ability, circuit analyzing ability, inspecting and measuring ability, repairing (problem solving) ability and organizing ability. In order to achieve the purpose of study, degree of improvement in circuit repairing ability of learner's group was measured through experiment design and verification by group of experts. SPSS statistics program was used for statistical analysis in which average value for descriptive statistics, Cronbach ${\alpha}$ coefficient and t-test were conducted. Level of significance for t-test was p<.05. The conclusions from conducting this study are as follows. Firstly, the usage of terminology 'circuit repairing ability' pertaining to ability to repair failure of electrical devices in automobiles was confirmed to be appropriate. Secondly, the categorization of circuit repairing ability into sub-factors of preparing ability, attaching/detaching ability, circuit analyzing ability, inspecting and measuring ability, repairing (problem solving) ability and organizing ability was confirmed to be appropriate. Thirdly, field instruction on headlight assignment that has been revised according to achievement of learner's goals was confirmed to be effective in improving learner's circuit repairing abilities compared to regular training. Fourthly, field instruction on headlight assignment that has been revised according to achievement of learner's goals was confirmed to be effective in improving sub-factors of circuit repairing abilities, which are preparing ability, attaching/detaching ability, circuit analyzing ability, inspecting and measuring ability, repairing (problem solving) ability and organizing ability.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.6
• /
• pp.142-150
• /
• 2011

Defect dispute has been increasing to claim by condominium, in increasing to demand and concern in value, quality, and management of apartment building since 2000s. In this study, for checking property of cost in crack issue with precedure of lawsuit on defect, it is analyzing details about repairing cost of concrete crack defect that formed 77 percent of repairing cost. Futhermore, it is studying of composition of repairing cost and difference of repairing cost by repairing method. This is checking details that cost growth has a difference whether court accept a acceptable range of crack width, and repairing method and reinforcement work has to choose between a surface treatment method, a filling method and a injecting method. Meanwhile, it is considerable that disparity of repairing cost whether is a method of painting work.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.3
• /
• pp.230-238
• /
• 2017

Carbonation is a representative deterioration for underground structure, which causes additional repair for service life. This study proposes a simplified equation for optimum repair timing without complicated probability calculation, considering initial and repair conditions For the work, initial service life, extended service life through repair, and their COVs(Coefficient of Variation) are considered, and the periods which can reduce number of repair are evaluated. Assuming the two service lives to be independent, the repair timings are derived from 10 to 50 years based on the probabilistic method, and the regression analysis technique for optimum repairing timing is proposed. Decreasing COV has insignificant effect on reducing repairing number but shows a governing effect on changes in probability near the critical repairing stage. The extension of service life through repairing is evaluated to be a critical parameter for reducing repairing number. The proposed technique can be efficiently used for maintenance strategy with actual COV of initial and additional service life due to repairing.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.10
• /
• pp.821-829
• /
• 2020

Health management system of airborne software repairs runtime errors to provide safety and to reduce cost of maintenance. It is critical to on-the-fly repair order violation errors, because it is difficult to identify them at the development phase. Previous work, called Repairing Atomicity Violations (Repairing-AV) diagnoses order violations for each access event by comparing execution order of accesses. As a result, Repairing-AV has time overhead that is proportional to the number of access events to shared variable. This paper presents a tool called On-the-fly Repairing System (ORS) that can repair order violations of object methods containing access events. The ORS diagnoses order violations by using correct order of object methods, and treats them by stalling its thread where the error is about to occur. Experimentation with five synthetic programs shows that ORS is more efficient than Repairing-AV when the number of access events is greater than sixty.

• Structural Engineering and Mechanics
• /
• v.67 no.3
• /
• pp.233-244
• /
• 2018

This study aims at evaluating the performance of repairing technique with CFRPs in recovering cyclic performance of damaged columns in flexure in terms of structural response parameters such as strength, dissipated energy, stiffness degradation. A 2/3 scaled substandard reinforced concrete frame was constructed to represent the substandard RC buildings especially in developing countries. These substandard buildings have several structural deficiencies such as strong beam-weak column phenomenon, improper reinforcement detailing and poor material properties. Flexural plastic hinges occurred at the columns ends after testing the substandard specimen under both constant axial load and reversed cyclic lateral loading. Afterwards, the damaged columns were externally wrapped with CFRP sheets both in transverse and longitudinal directions and then retested under the same loading protocol. In addition, ambient vibration measurements were taken from the undamaged, damaged and the repaired specimens at each structural repair steps to identify the effectiveness of each repairing step by monitoring the change in the natural frequencies of the tested specimen. The ambient vibration test results showed that the applied repairing technique with external CFRP wrapping was proved to recover stiffness of the pre-damaged specimen. Moreover, the lateral load capacity of the pre-damaged substandard RC frame was restored with externally bonded CFRP sheets.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.4
• /
• pp.1360-1388
• /
• 2021

Shipbuilding and repairing enterprise has the characteristics of many hazards and accidents. Therefore, the safety management ability of shipbuilding and repairing MIS (management information system) must be effectively guaranteed. The verification on safety management is the necessary measure to ensure and improve the safety management ability of MIS. Safety verification can not only increase the safety of MIS, but also make early warning of potential risks in management to avoid the accidents. Based on the authoritative standards in the field of safety in shipbuilding and repairing enterprise, this paper applied modeling and verification method based on ontology to safety verification of MIS, extracted the concepts and associations from related safety standards to construct axiom set to support safety verification on MIS of shipbuilding and repairing enterprise. Then, this paper developed the corresponding safety ontology modeling and verification tool-SOMVT. By the application and comparison of two examples, this paper effectively verified the safety of MIS to prove the modeling method and the SOMVT can improve the safety of MIS in a much more effective and stable way to traditional manual analysis.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.801-809
• /
• 2000

Until recently as a method of repairing leaking problem, generally urethane series were used for many structures as subway, box culvert etc. However the lacking of sufficient penetration capacity have made it difficult to repair such structures completely. Now, we could achieve enhanced quality of repairing work by using new material which was compounded of urethane series and cement series properly. This material can penetrate concrete structure efficiently and move interactively with the structure in case of the thermal expansion. Besides of this, we could prevent expecting leakage through several improvements on the aspects of design, materials and site implementation.