• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.10 no.1
• /
• pp.63-68
• /
• 2004

The regulations for migration amounts in USA, EU and Korea are investigated to compare the actual overall and specific migration date from plastic food packaging materials. Among the packaging materials regulated in above countries, printing ink solvents on packaging materials is used very widely and sometimes cause off-flavor in the food by migration of residual solvents. Even though migration of the residual solvents dose not generally cause safety problems in the contained food, it certainly can generate off-flavor and finally deteriorate quality of the finished product. Therefore regulation and development of analytical method for amount of residual ink solvents are very important issue in food industry. The headspace analytical method and tenax method for residual ink solvent on food packaging materials were evaluated from the accuracy, precise, swiftness and convenience of viewpoint. Headspace analytical method was selected and recommended for using in food industry field.

• Korean Journal of Food Science and Technology
• /
• v.42 no.4
• /
• pp.390-397
• /
• 2010

Residual solvents in foods are defined as organic volatile chemicals used or produced in manufacturing of extracts or additives, or functional foods. The solvents are not completely eliminated by practical manufacturing techniques and they also may become contaminated by solvents from packing, transportation or storage in warehouses. Because residual solvents have no nutritional value but may be hazardous to human health, there is a need to remove them from the final products or reduce their amounts to below acceptable levels. The purpose of this study was to develop and evaluate an analytical method for the screening of residual solvents in health functional foods. Furthermore, the aim of this study was to constitute a reasonable management system based on the current state of the market and case studies of foreign countries. Eleven volatile solvents such as MeOH, EtOH, trichloroethylene and hexane were separated depending on their column properties, temp. and time using Gas Chromatography (GC). After determining the GC conditions, a sample preparation method using HSS (Head Space Sampling) was developed. From the results, a method for analyzing residual solvents in health functional foods was developed considering matrix effect and interference from the sample obtained from the solution of solvents-free health functional foods spiked with 11 standards solutions. Validation test using the developed GC/HSS/MS (Mass Spectrometry) method was followed by tests for precision, accuracy, recovery, linearity and adequate sensitivity. Finally, examination of 104 samples grouped in suits was performed by the developed HSS/GC/MS for screening the solvents. The 11 solvents were isolated from health functional foods based on vapor pressure difference, and followed by separation within 15 minutes in a single run. The limt of detection (LOD), limit of quantification (LOQ), recovery and coefficient of variation (C.V.) of these compounds determined by the HSS/GC/MS were found to be 0.1 pg/mL, 0.1-125 pg/g, 51.0-104.6%, and less than 15%, respectively. Using the developed HSS/GC/MS method, residual solvent from 16 out of 104 health functional products were detected as a EtOH. This method therefore seems t o be a valuable extension ofanalytical method for the identification of residual solvents in health functional food.

• Journal of Food Hygiene and Safety
• /
• v.14 no.1
• /
• pp.76-83
• /
• 1999

Solid phase microextraction (SPME) was used for the determination of 6 standard solvents (methanol, isopropanol, methyl ethyl ketone, ethyl acetate, cyclohexane, toluene) in food packaging materials. SPME method is a solvent-free sample preparation technique in which a fused silica fiber coated with polymeric organic liquid is introduced into the headspace above the sample. SPME method using fiber coated polydimethylisiloxane (PDMS) was compared with static headspace (SHS) method used as a reference. It was found that the optimal adsorption condition using PDMS-SPME method was 2$0^{\circ}C$ for 15 minutes for the standard solvents. Detection limits, linearity, reproducibility and recovery of both SHS and PDMS-SPME methods have been determined using 6 standard solvents. Both methods were characterized by high reproducibility and good linearity. Using SHS methods, the mean recovery of the 6 standard solvents was ranged from 75.5% to 105.8% with a mean relative standard deviation (RSD) of 0.3% to 4.8%. With PDMS-SPME method, the mean recovery of the 6 standard solvents was ranged from 86.7% to 108.3% with a mean RSD of 0.4% to 2.5%. The detection limits of both methods were the same for toluene, cyclohexane and methyl ethyl ketone; those of PDMS-SPME method were higher than those of SHS method for methanol, isopropanol and ethyl acetate. PDMS-SPME fiber shoed excellent adsorption for non-polar solvents such as toluene, while it showed relatively low adsorption for polar solvents such as methanol.

• KSBB Journal
• /
• v.16 no.3
• /
• pp.233-236
• /
• 2001

Because of casehardenign effect of amorphous paclitaxel, residual solvents, methylene chloride and emthanol could not be reduced to the maximum value allowed, 600 ppm and 3,000 ppm, in accord with the guidelines issued by the International Conference on Harmonization (ICH, 1997), using rotary evaporation and successive drying in a vacuum oven. However, methylene chloride and methanol were reduced to 486 ppm and 403 ppm, respectively using supercritical $CO_2$ on purified paclitaxel. The optimum pressure and operating time were 80 bar and 30 min at fixed operating temperature ($40^{circ}C$). This approach serves as a novel application of supercritical fluid extraction to remove residual solvents from active pharmaceutical ingredients.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.6 no.1
• /
• pp.19-23
• /
• 2000

The increasing use of plastics in food packaging materials has led to the issue of food-packaging mutual interactions from residues in the plastics. Plastic films are commonly printed by using solvent-based ink to decorate the packaged food for consumer attention. However, the residual solvents can not be completely removed and they can migrate into the contained food which lead to undesirable off-flavors. Partitioning (Kp) of printing ink solvents was studied in two types of plastic films with different chemical structure and polarity. At $25^{\circ}C$, Kp of toluene is higher than that of isopropanol in PP, but isopropanol showed higher Kp value than toluene in EVOH. This showed that polarity had a significant effect on the partitioning of printing ink solvents into the plastic films. Printing solvents had a higher affinity to the polymer with similar polarity than it did to the different one.

• Journal of Environmental Science International
• /
• v.16 no.1
• /
• pp.39-44
• /
• 2007

This study was conducted to investigate the contents of residual solvents and mineral components(11 kinds) in ginseng extracts with different extracting conditions(5 types) and commercial ginseng extract products(domestic, imported). Fine root was extracted with solution having various ethanol concentration after hexane treatment. Among 5 type extracts, residual solvent(hexane) was detected ginseng extracts treated ethanol mixed with hexane. But extracts that dried after soaked in hexane wasn't detected hexane. Mineral components(Al, Mn, Fe, Cu and Zn) were detected in fine root and 5 types of extracts. The contents of mineral components between fine root and extracts with various extracting conditions were similar, however, extracts that dried after soaked in hexane showed the lower amount in Al, Fe, Pb than the others. In comparison with commercial ginseng ex-tract products(domestic, imported), the distribution pattern of mineral was similar but the contents were a little different.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.10 no.1
• /
• pp.1-6
• /
• 2004

Amount of residual ink solvent on the packaging materials from Korea, Japan and Europe was measured and compared. The amount of packaging materials from Korea was much higher than that of Japan and Europe. To reduce the residual amounts of ink solvent, aging condition of printed packaging materials including aging time and temperature was modified and evaluated. Aging with high temperature and short time ($60^{\circ}C$ and 24 hours) was more effective for reduction of residual amount of ink solvent than that with low temperature and long time. To find out change of reduction pattern of residual amount of solvent according to plastic packaging material, several monolayer and multilayer packaging materials were selected. Among the monolayer packaging materials, the amount of EVOH and PET was lower than that of polyolefin plastic film including PE and PP. PP/EVOH/PET among the selected multilayer film showed the lowest amount of residual ink solvent on food packaging materials. Result of this research revealed that the residual amount of ink solvent can be reduced by proper selection of aging condition with and by appropriate application of mutilayer plastic film.

• Toxicological Research
• /
• v.34 no.2
• /
• pp.111-125
• /
• 2018

Solvents can be used in the manufacture of medicinal products provided their residual levels in the final product comply with the acceptable limits based on safety data. At worldwide level, these limits are set by the "Guideline Q3C (R6) on impurities: guideline for residual solvents" issued by the ICH. Diisopropyl ether (DIPE) is a widely used solvent but the possibility of using it in the pharmaceutical manufacture is uncertain because the ICH Q3C guideline includes it in the group of solvents for which "no adequate toxicological data on which to base a Permitted Daily Exposure (PDE) was found". We performed a risk assessment of DIPE based on available toxicological data, after carefully assessing their reliability using the Klimisch score approach. We found sufficiently reliable studies investigating subchronic, developmental, neurological toxicity and carcinogenicity in rats and genotoxicity in vitro. Recent studies also investigated a wide array of toxic effects of gasoline/DIPE mixtures as compared to gasoline alone, thus allowing identifying the effects of DIPE itself. These data allowed a comprehensive toxicological evaluation of DIPE. The main target organs of DIPE toxicity were liver and kidney. DIPE was not teratogen and had no genotoxic effects, either in vitro or in vivo. However, it appeared to increase the number of malignant tumors in rats. Therefore, DIPE could be considered as a non-genotoxic animal carcinogen and a PDE of 0.98 mg/day was calculated based on the lowest No Observed Effect Level (NOEL) value of $356mg/m^3$ (corresponding to 49 mg/kg/day) for maternal toxicity in developmental rat toxicity study. In a worst-case scenario, using an exceedingly high daily dose of 10 g/day, allowed DIPE concentration in pharmaceutical substances would be 98 ppm, which is in the range of concentration limits for ICH Q3C guideline class 2 solvents. This result might be considered for regulatory decisions.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.9 no.3
• /
• pp.147-150
• /
• 2004

Permeabilization is known to overcome cell membrane barriers of whole cell biocatalysts. The use of organic solvents is advantageous in terms of cost, simplicity, and efficiency. In this study, Ochrobactrum anthropi SY509 was permeabilized with various organic solvents. Treatment with organic solvents resulted in lower permeability barriers due to falling out lipids of the cell membrane. Therefore, permeabilized cells showed higher enzyme activity with no cell viability. Among various organic solvents, 0.5% (v/v) chloroform was selected as the most efficient permeabilizing reagent. Changes in the cell membrane structure were observe d and the residual amounts of phospholipids of the cell membrane were measured to investigate the mechanism of the improved permeability.

• Membrane and Water Treatment
• /
• v.11 no.4
• /
• pp.237-245
• /
• 2020

The effects of the mixed two solvents, Dimethylacetamide (DMAc) and Dimethylformamide (DMF), and Polyethylene glycol (PEG) and Polyvinylpyrrolidone (PVP) as additives on performance of Polyvinylidene fluoride (PVDF) membranes were studied. Initially, PEG200 was used as a primary additive at fixed percentage of 5% wt. PVP was then blended with PEG200 in different concentrations. PVDF and DMAc were used as polymer and solvent in the casting solutions, respectively. To control the diffusion rate of PVP in the presence of PEG200 and PVP blend, mixtures of DMAc and DMF were used as the mixed solvent in the casting solutions. Asymmetric PVDF membranes were prepared via phase inversion process in a water bath and the effects of two additives and two solvents on the membrane morphology, pure water flux (PWF), hydrophilicity and rejection (R) were investigated. Attenuated Total Reflection Fourier Transform Infrared Spectra (ATR-FTIR) analysis was used to show the residual PVP on the surface of the membranes. Atomic Force Microscopy (AFM) was utilized to determine roughness of membrane surface. The use of mixed solvents in the casting solution resulted in reduction of PVP diffusion rate and increment of PEG diffusion rate. Eventually, PWF and R values reduced, while porosity and hydrophilicity increased.