• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.438-444
• /
• 1999

The natural full-fat rice bran is reported to contain 8.4 to 14.7 wt % Lipids, but the amount and composition of bran depend on the type of rice, quality of paddy, pretreatments to paddy such as parboiling, type of milling system employed, and the degree of polishing. These lipids are usually mixtures of several class fatty acids containing palmitic acid, linolenic acid, linoleic acid, oleic acid, stearic acid, tocopherol, squalene, etc. In this study the oil rich essential fatty acid (EFA) including squalene was extracted from the domestic brown rice bran using supercritical fluid extraction (SFE) and cosolvent induced SFE process, respectively. And the extracts were analyzed with GC-MSD. The extracted amount of rice bran oil was dependent upon the operating pressure and temperature, and the fatty acid composition of oil was varied with the reduced density (${\rho}_{\gamma}$) of supercritical carbon dioxide. About 70~80% of rice bran oil was extracted in 4hrs. The cosolvent induced SFE process shortened the total extraction time, extracted greater amount of oil than SFE process. Especially squalene which was not found in solvent extract phase was identified in SFE and cosolvent induced SFE process.

• Preventive Nutrition and Food Science
• /
• v.7 no.3
• /
• pp.255-260
• /
• 2002

Yukwa is a popular Korean traditional fried rice snack. The high fat content and porous structure of Yukwa cause it to rapidly become rancid, presenting difficult challenges for commercial distribution. In this study, an-tioxidant activities of green tea extracts (GTE) were evaluated in Yukwa fried in soybean oil (SBO), rice bran oil (RBO) and winterized rice bran oil (WRBO) during storage at 4$0^{\circ}C$ for 12 weeks. Lipid oxidation of Yukwa was determined by acid value (AV), peroxide value (POV), p-anisidine value(AnV), totox value and sensory evaluation. The addition of GTE to the oils reduced the increases in AV, POV, AnV, and totox. Totox increased most vapidly in Yukwa fried in SBO, fellowed by RBO>WRBO>SBO+200 ppm GTE>RBO+200 ppm GTE > WRBO + 200 ppm GTE (p<0.05). Sensory evaluation revealed that the addition of 200 ppm GTE delays rancidity in Yukwa by 7~8 weeks; providing compelling evidence that GTE is an effective antioxidant for Yukwa.

• The Korean Journal of Food And Nutrition
• /
• v.1 no.1
• /
• pp.3-6
• /
• 1988

For the purpose of the production of yeast cell protein from rice bran oil, it's assimillating yeast(E222) was isolating from soil and the resulting of identification was shown that it was belonging to Candida aibican species Total free amino acids from yeast cells were shown 0.05% per gram. Nine other species of amino acids as well as glycine, glutamic acid, alanine, leucine and aspartic acid were produced from yeast cells.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.1
• /
• pp.146-153
• /
• 1997

An experiment was conducted to figure out the atomization characteristics of a highly viscous biodiesel fuel with rice-barn oil applying and ultrasonic energy into it. A spray simulator for the droplet atomization, an ultrasonic system, and six different nozzles(3 pintle-type nozzles and 3 single hole-type nozzles) were made. To investigate effects of ultrasonic energy in a highly viscous liquid fuel, an immersion liquid method was used as a measurement method on droplet size distributions. It was found that the ultrasonic energy was effective for the atomization improvement of the rice-bran oil as a highly viscous biodiesel fuel and the factor나 such as the nozzle opening pressure, pin-edge angles, hole diameters, and collection distances affected the atomization of spray droplets.

• Korean Journal of Food Science and Technology
• /
• v.16 no.1
• /
• pp.37-40
• /
• 1984

A simple and low cost autogenous-type extruder with a capacity of about 400kg/hr for rice bran-oil stabilization was developed. Specific energy consumption of the extruder was 0.060-0.070 KWH/kg of rice bran during extrusion. Rice bran was easily extruded to form flakes or pellets with an increase of bulk density. And also the desired extrusion temperature of $95^{\circ}C{\;}to{\;}150^{\circ}C$ could be easily obtained without any water addition when the rice bran was properly parametered with feed rate. The moisture content of bran was reduced and peroxidase was significantly inactivated after extrusion. The rice bran stabilized by the extrusion process was excellent in storage stability without considerable increase in free fatty acids.

• Korean Journal of Food Science and Technology
• /
• v.15 no.1
• /
• pp.77-89
• /
• 1983

Properties and frying performance of domestic rice bran oil were studied. For this purpose, the analyses on the following characteristics were performed and their comparison with the characteristics of soybean oil was made: fatty acid composition, glycerides, composition, acid value, specific gravity, color, petroleum ether insoluble oxidized fatty acid, viscosity, smoke point, foam test, and water solubility. The results were as follow: 1) Fatty acid composition of domestic rice bran oil by gas chromatography was same as perviously reported, and similar to the fatty acid composition of the rice bran oil in foreign countries. Also the glyceride composition of domestic rice bran oil was analyzed by the methods of TLC, column chromatography, and high performance liquid chromatography. The results were monoglyceride ranged from one to four percent; diglyceride 30-30% and triglyceride 66-80%. Consequently, the composition was proven completely different from that of the other edible oils. 2) The high contents of mono-glyceride in rice bran oil resulted in high values of specific gravity and water-solubility respectively. However, high contents mono glyceride and diglyceride indicated little affection to changes of acid value, color, petroleum ether insoluble oxidized fatty acid, and smoke point on frying. 3) Because of low contents of linoleic acid, domestic rice bran oil was estimated stable on frying, whereas soybean oil was easily polymerized. 4) A serious foaming and low smoke point on Frying in domestic rice bran oil were caused by its impurities. It seems that monoglyceride and diglyceride had little relation with foaming and smoke point. 5) Oils with serious foaming and low smoke point on frying caused a substantial quality loss in terms of flavor and appearance of fried materials.

• Korean Journal of Food Science and Technology
• /
• v.51 no.6
• /
• pp.531-536
• /
• 2019

In this study, the optimization of the manufacturing process for the oil-in-water emulsification of rice bran oil was performed by response surface methodology (RSM) using varying amounts of the emulsifier (0.05-0.25%), varying rotation speeds of the homomixer (4,000-8,000 rpm), and varying water to oil ratios (0.8-1.6%) as independent variables, and the emulsion stability index (ESI) as the dependent variable. The optimization conditions predicted by the RSM model were 0.2%g of the total amount of the rice bran oil emulsion, emulsified at the homomixer rotation speed of 6,700 rpm using a water to oil ratio of 1:3. The ESI of the rice bran oil emulsion prepared under the optimized conditions was 95.7%, which was similar to the predicted value of 94.4% obtained by the RSM model. The transmission stability and the backscattering values were found to agree with each other over time and the turbiscan stability index was less than 0.7, indicating that the aggregation and upper floatation were less while the dispersion stability was maintained.

• Korean Journal of Food Science and Technology
• /
• v.16 no.1
• /
• pp.113-119
• /
• 1984

Initial moisture content and weight of the rice bran and treatment time were identified as important variables for the inactivation of lipase and peroxidase present in rice bran. Multiple regression analysis was used to obtain a prediction equation to measure the effects of moisture content and weight of the sample and microwave treatment time on the residual lipase activity and loss in weight. It was found that the microwave treatment did not affect acid value and extractability of the rice bran oil.

• Korean Journal of Food Science and Technology
• /
• v.54 no.3
• /
• pp.320-326
• /
• 2022

This study aimed to investigate the quality characteristics of vegan lentil (Lens culinaris) cookies prepared with different types (butter, rice bran oil, canola oil, and coconut oil) and content (10, 20, and 30 g) of fat and oil. The hardness and pH declined with increased fat and oil content. Spreadability, moisture content and antioxidant activity increased with the fat and oil content. The density declined only when rice bran oil was added. Lightness and yellowness decreased with higher concentrations of vegetable oil. Redness increased as more coconut oil and canola oil were added. Rice bran oil cookies had the highest pH, spreadability, moisture content and antioxidant activity. Butter cookies had the highest lightness value, whereas coconut oil cookies had the highest hardness value. In conclusion, rice bran oil could be a quality substitute for butter when developing vegan cookie products.

• Korean Journal of Medicinal Crop Science
• /
• v.21 no.1
• /
• pp.45-48
• /
• 2013

This study was carried out to know the substitute effect of Yacto (leaf mold compost) on popped rice hulls compost (PRHC) in Yang-jik nursery bed of Panax ginseng. PRHC was mixed with Yacto as 50:50 ratio, and 1 ~ 2% of the mixed oil cake, rice bran and urea were also added to promote decaying the mixed compost. The mixed compost made by PRHC and Yacto was showed that positive effect on the growth of ginseng seedling when it was mixed with 1% of oil cake and rice bran, and 2% of mixed oil cake. But addition to the 2% of urea in the mixture of PRHC and Yacto was not positive effect on the growth of ginseng seedling. Root yield of the mixed compost was similar to that of conventional compost by made 100% of Yacto. Therefore, the mixed compost can substitute for Yacto when PRHC and Yacto were mixed by 50:50 ratio and added 1% of oil cake and rice bran.