• Korean Journal of Geomatics
• /
• v.1 no.1
• /
• pp.15-20
• /
• 2001

In this study, several basic data for road design and GIS data were used for selecting the optimized road alignment database system. The cut and fill volumes were compared with existing manual road design method through the analysis and data application in this database system. We solved and estimated objective, economic, environmental and technical problems caused in road construction comparing existing manual method with the road alignment which was selected in GIS automatically. Also, we performed three dimensional simulation with the existing road design program and simulation of virtual reality through Virtual GIS. This study showed the method in selecting the optimized road alignment through the analysis and comparison of the selected road alignment. The goal of this study is comparison and analysis of definite cut and fill volume and environmental problem after the road construction through analyzing and comparing the social, economic, technical and environmental aspect in the road alignments with various statistic data.

• Journal of the Korean Society of Safety
• /
• v.28 no.5
• /
• pp.41-48
• /
• 2013

This paper is intended to provide the background information and justification for Korean highway bridge design code(limit state design)(2012). Limit state design method calculates reliability index and probability of failure through the analysis of the reliability of the experimental database. It has become possible to perform the economical and consistent design by evaluating the safety of a structure quantitatively. In this paper, we used the design specifications of RC slab bridge of superstructure form of Road Design Manual in Part 5 bridge built in highway bridge. This study conducted structural analysis using the method of frame structure theory, design and analysis of bridge by limit state design method, the design code including various standards and Load model applied Korean highway bridge design code limit state design(KHBDC;2012). As a result, it analyzed the effect of safety through comparison. Showing effect of improvement the safety factor and comparing the value of the result, it is determined to be capable of economical design and safety. Furthermore, limit state design method was able to determine many redundant force of cross-section compared with existing design method. It is determined that it can reduce the overall amount because of the reduction of the cross-section and girder depth.

• 기술발표회
• /
• s.2006
• /
• pp.86-100
• /
• 2006

The single drilled shaft foundation has been used in the other countries, but has not used in South Korea at all This foundation is very effective and economic method in South Korea which is easy to meet a good rock mass within 50m depth from the ground We have many experiences to construct 1.52 5m drilled shaft foundations and ability to construct 30m drilled shaft foundation without special efforts The soil behavior is nonlinear, but it can be proposed in linear in practical purpose on bridges. The elastic modulus of soil can be rationally obtained by the method of Road Bridge Design Manual in South Korea using the Schmertmann(1970)'s proposal, and the elastic modulus of rock can be obtained by the field test. In seismic design the column and drilled shaft must be restricted to the elastic design because the behavior of this foundation is flexible and the arrangement of the rebars makes the various defect In this paper the design criteria is compared with FHWA design criteria, and the design criteria is proposed in consistent with Road Bridge Design Manual in South Korea. The single drilled shaft foundation of a test bridge was constructed in the Iksan-Jangsoo highway, and we checked its stability, workability and economy

• 한국도로학회:학술대회논문집
• /
• 2000.11a
• /
• pp.55-59
• /
• 2000

• Korean Journal of Computational Design and Engineering
• /
• v.20 no.4
• /
• pp.431-442
• /
• 2015

Currently, a BIM-based quantity takeoff (QTO) system is mainly focused on architectural projects. To perform this, diverse quantity takeoff methods such as an object-based automatic quantity takeoff, manual quantity and base functions of calculation have widely been utilizing. However, since BIM library for road projects includes structural elements associated with alignment, it is necessary to establish cost estimation system interlocked with historical cost using 3D library by each unit length. Accordingly, the aim of this study is to develop cost estimation model with using a historical cost approach so that it can be utilized in construction planning based on the BIM library for road projects. For this, based on the BIM library for road, the standardized quantity is estimated, and a process for calculating historical cost and a verification model with a 5D simulation was developed by mapping a WBS code with each BIM library object. This can be applied during the approximate cost estimation process in a project planning and an initial design phase for road projects. Besides, it is expected that these results will be utilized in constructing an optimal historical cost estimation process for project libraries.

• Journal of Korean Society of Transportation
• /
• v.22 no.4 s.75
• /
• pp.69-82
• /
• 2004

Urbanization of Korea reaches up to 90% in the year 2003. What that means is that 90% of population live in the city areas. This phenomenon emphasizes importances of urban streets where people feel accessibility and level of environmental amenity, enjoy recreational activity, and live for a life. However, the current Korean manual for designing road is not enough to accomodate various activities of urban streets since its target is basically rural roads. This study proposes the necessity of a new design manual of urban streets via analyzing the practices of the development countries, and aims to recommend what should be prepared and how those are defined for developing a design manual of urban streets in Korea. It is inevitable that the design manual of urban streets be based on the flexibility and diversity. The manual should be made through consensus among the related stakeholders such as designers, residents and officials. And it also should reflect the characteristics of each city. It is somehow true that without the manual, designing of urban streets can be done although it is not fully acceptable. This does not mean that the necessity of the manual can be ignored. Rather, we should remember that the related stakeholders may not want to reveal what are hidden in developing the design manual of urban streets. What are hidden is that developing the design manual of urban streets is difficult problem to solve. It is a wish that this study triggers the on-going research and interests on developing the design manual of urban streets.

• International Journal of Highway Engineering
• /
• v.17 no.2
• /
• pp.143-150
• /
• 2015

PURPOSES : The authors set out to estimate the related carbon emissions, energy use, and costs of the national freeways and highways in Korea. To achieve this goal, a macro-level methodology for estimating those amounts by road type, road structure type, and road life cycle was developed. METHODS : The carbon emissions, energy use, and costs associated with roads vary according to the road type, road structure type, and road life cycle. Therefore, in this study, the road type, road structure type, and road life cycle were classified into two or three categories based on criteria determined by the authors. The unit amounts of carbon emissions and energy use per unit road length by classification were estimated using data gathered from actual road samples. The unit amounts of cost per unit road length by classification were acquired from the standard cost values provided in the 2013 road business manual. The total carbon emissions, energy use, and cost of the national freeways and highways were calculated by multiplying the road length by the corresponding unit amounts. RESULTS: The total carbon emissions, energy use, and costs associated with the national freeways and highways in Korea were estimated by applying the estimated unit amounts and the developed method. CONCLUSIONS: The developed method can be employed in the road planning and design stage when decision makers need to consider the impact of road construction from an environmental and economic point of view.

• Journal of Korean Society of Transportation
• /
• v.22 no.7 s.78
• /
• pp.25-32
• /
• 2004

It is implicated in the current road design manual that design speed is well representing the operating speed of drivers. On the contrary, the disparity between the design speed and operating speed means that current road design cannot guarantee the safety and comfort of driving. In this context, operating speed was observed at the two lane rural roadways to find out the relation of operating speed and design speed. In addition to this, the friction factor from supply and demand which was derived from the operating speed was compared in terms of the dynamics in driving safety factor. It was concluded that the actual speed was consistently exceeding the design speed at the horizontal curves having the radius less than or equal to 200 m. Similarly, the demanded side friction was also consistently exceeding the supplied side friction at the horizontal curves having the radius less than or equal to 200 m and the amount of difference was also inversely proportional to the radius of the horizontal curves.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.21 no.2
• /
• pp.61-65
• /
• 2015

Agricultural products packaged for transportation are put in the various dangerous environments owing to the damage factors like vibration, shock, compression, climate etc. under the distribution process. On fruits packaging for transportation, especially, the shock and vibration is considered as the most important damage factors. A major cause of shock damage to fruits is drops during manual handling. Especially, the damages of fruits during the parcel delivery service are very serious. The parcel delivery services of fruits are increasing and contribute to increasing of farm house earning. Also, the freight vehicle is mostly used to transport the fruits. Shock and impact generated by the freight vehicle may give serious damage to fruits. The optimum packaging design of parcel delivery service of fruits during transportation is required to reduce the fruits damages. In order to design the packaging system for parcel delivery service of fruits considering the transportation environment, the comprehension of characteristics for vibration and shock generated by manual handling and acting on transportation vehicles under various road conditions and loading methods is required. This research was performed to analyze the shock characteristics, acceleration level and power spectral density (PSD) during the parcel delivery service of fruits. The overall level of recommended PSD profile in a specific transportation of parcel delivery service for fruits was $0.63G_{rms}$.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.4
• /
• pp.496-503
• /
• 1999

In this paper, the improvement of cap tilting system in heavy truck and the development of program for automatic design are discussed. Cab tilting system takes some important roles in heavy truck, absorbing discomfort vibration from load, increasing repair efficiency and making sure of safety. Common manual cab tilting system cannot be easily tilt up in sloped road, giving difficulty to driver as cal tilting up/down. So recently hydraulic cab tilting system is in wide use. But some problem such as tilting up/down speed is not constant and sudden swing of cab has brought discredit from user. Therefore, this paper presents advanced cab tilting system which prevents sudden swing of cab and development of program for selecting design parameters automatically.