• Korean Journal of Geomatics
• /
• 제1권1호
• /
• pp.15-20
• /
• 2001

In this study, several basic data for road design and GIS data were used for selecting the optimized road alignment database system. The cut and fill volumes were compared with existing manual road design method through the analysis and data application in this database system. We solved and estimated objective, economic, environmental and technical problems caused in road construction comparing existing manual method with the road alignment which was selected in GIS automatically. Also, we performed three dimensional simulation with the existing road design program and simulation of virtual reality through Virtual GIS. This study showed the method in selecting the optimized road alignment through the analysis and comparison of the selected road alignment. The goal of this study is comparison and analysis of definite cut and fill volume and environmental problem after the road construction through analyzing and comparing the social, economic, technical and environmental aspect in the road alignments with various statistic data.

• 한국안전학회지
• /
• 제28권5호
• /
• pp.41-48
• /
• 2013

This paper is intended to provide the background information and justification for Korean highway bridge design code(limit state design)(2012). Limit state design method calculates reliability index and probability of failure through the analysis of the reliability of the experimental database. It has become possible to perform the economical and consistent design by evaluating the safety of a structure quantitatively. In this paper, we used the design specifications of RC slab bridge of superstructure form of Road Design Manual in Part 5 bridge built in highway bridge. This study conducted structural analysis using the method of frame structure theory, design and analysis of bridge by limit state design method, the design code including various standards and Load model applied Korean highway bridge design code limit state design(KHBDC;2012). As a result, it analyzed the effect of safety through comparison. Showing effect of improvement the safety factor and comparing the value of the result, it is determined to be capable of economical design and safety. Furthermore, limit state design method was able to determine many redundant force of cross-section compared with existing design method. It is determined that it can reduce the overall amount because of the reduction of the cross-section and girder depth.

• 기술발표회
• /
• 통권2006호
• /
• pp.86-100
• /
• 2006

The single drilled shaft foundation has been used in the other countries, but has not used in South Korea at all This foundation is very effective and economic method in South Korea which is easy to meet a good rock mass within 50m depth from the ground We have many experiences to construct 1.52 5m drilled shaft foundations and ability to construct 30m drilled shaft foundation without special efforts The soil behavior is nonlinear, but it can be proposed in linear in practical purpose on bridges. The elastic modulus of soil can be rationally obtained by the method of Road Bridge Design Manual in South Korea using the Schmertmann(1970)'s proposal, and the elastic modulus of rock can be obtained by the field test. In seismic design the column and drilled shaft must be restricted to the elastic design because the behavior of this foundation is flexible and the arrangement of the rebars makes the various defect In this paper the design criteria is compared with FHWA design criteria, and the design criteria is proposed in consistent with Road Bridge Design Manual in South Korea. The single drilled shaft foundation of a test bridge was constructed in the Iksan-Jangsoo highway, and we checked its stability, workability and economy

• 한국도로학회:학술대회논문집
• /
• 한국도로학회 2000년도 학술발표회 논문집
• /
• pp.55-59
• /
• 2000

• 한국CDE학회논문집
• /
• 제20권4호
• /
• pp.431-442
• /
• 2015

Currently, a BIM-based quantity takeoff (QTO) system is mainly focused on architectural projects. To perform this, diverse quantity takeoff methods such as an object-based automatic quantity takeoff, manual quantity and base functions of calculation have widely been utilizing. However, since BIM library for road projects includes structural elements associated with alignment, it is necessary to establish cost estimation system interlocked with historical cost using 3D library by each unit length. Accordingly, the aim of this study is to develop cost estimation model with using a historical cost approach so that it can be utilized in construction planning based on the BIM library for road projects. For this, based on the BIM library for road, the standardized quantity is estimated, and a process for calculating historical cost and a verification model with a 5D simulation was developed by mapping a WBS code with each BIM library object. This can be applied during the approximate cost estimation process in a project planning and an initial design phase for road projects. Besides, it is expected that these results will be utilized in constructing an optimal historical cost estimation process for project libraries.

• 대한교통학회지
• /
• 제22권4호
• /
• pp.69-82
• /
• 2004

우리 나라의 도시화율은 2003년 현재 90%에 다다르고 있으며, 도로이용자의 요구사항은 나날이 다양해지고 있어, 도시부의 다양한 도로종류 및 기능별 설계기준을 제시하고, 이용자의 다양한 욕구를 충족시킬 수 있는 $\ulcorner$도시부 도로의 구조 시설기준$\lrcorner$ 작성이 시급한 현실이다. 이에 본 연구는 선진국의 사례와 국내의 여건을 고려한 $\ulcorner$도시부 도로의 구조 시설기준$\lrcorner$ 작성방향을 횡단면 설계를 중심으로 정립하고, 전문가 설문조사를 통하여 도시부 도로 설계지침의 필요성과 기본방향, 설계 요소 등에 대해 분석하였다. 본 연구에서는 도시부 도로설계의 가장 중요한 요소인 횡단면(cross-section)을 중심으로 미국, 일본, 독일 등 도로분야 선진국들이 갖고 있는 기준을 국내의 설계기준과 비교 분석하여 우리나라 실정에 맞는 횡단면 설계기준의 기준안 작성에 시사점을 제공하고자 하였다. 선진국의 경우, 기본적으로 다양한 횡단면 설계가 가능하도록 설계 지침서가 제공되고 있으며, 각 설계 요소별로 최소치, 중간치, 최대치 등을 제공하는 등 설계자가 도시특성에 맞게 도로를 설계할 수 있는 틀을 제공하는 것으로 나타났다. 그러나, 우리나라의 경우 도시부 도로설계시 준용되고 있는 법규 및 기준서는 다양한 도시부 도로의 설계에 적용하기에는 매우 부족하고 경직된 구조임이 파악되었다. 전문가 설문조사 결과, $\ulcorner$도시부 도로의 구조 시설기준$\lrcorner$은 각계 전문가 및 이용자의 다양한 욕구를 감안할 때 어떤 형식으로든 제정되어야 하는 것으로 나타났으며, 이는 현재 사용되어지고 있는 '도로의 구조 시설기준에 관한 규칙' 및 그 해설집이 지역간 연결도로(지방부 도로)에 대한 최소치 기준만을 제시하고 있어 이용자의 다양성과 각 도시의 특성을 표현하는 수단으로 사용되기에는 매우 부족한 것으로 진단되기 때문이다.

• 한국도로학회논문집
• /
• 제17권2호
• /
• pp.143-150
• /
• 2015

PURPOSES : The authors set out to estimate the related carbon emissions, energy use, and costs of the national freeways and highways in Korea. To achieve this goal, a macro-level methodology for estimating those amounts by road type, road structure type, and road life cycle was developed. METHODS : The carbon emissions, energy use, and costs associated with roads vary according to the road type, road structure type, and road life cycle. Therefore, in this study, the road type, road structure type, and road life cycle were classified into two or three categories based on criteria determined by the authors. The unit amounts of carbon emissions and energy use per unit road length by classification were estimated using data gathered from actual road samples. The unit amounts of cost per unit road length by classification were acquired from the standard cost values provided in the 2013 road business manual. The total carbon emissions, energy use, and cost of the national freeways and highways were calculated by multiplying the road length by the corresponding unit amounts. RESULTS: The total carbon emissions, energy use, and costs associated with the national freeways and highways in Korea were estimated by applying the estimated unit amounts and the developed method. CONCLUSIONS: The developed method can be employed in the road planning and design stage when decision makers need to consider the impact of road construction from an environmental and economic point of view.

• 대한교통학회지
• /
• 제22권7호
• /
• pp.25-32
• /
• 2004

현 도로설계기준은 설계속도가 주행속도를 대표하는 값임을 내재하고 있다. 역으로, 설계속도와 주행속도의 불일치는 현 도로설계가 주행 안전 및 쾌적감을 보장하지 못함을 의미하게 된다. 이런 맥락에서, 지방부 2차로 도로를 대상으로 운전자의 주행속도를 조사하여 설계속도와 주행속도 사이의 관계에 대해 검토하였다. 추가적으로, 주행속도로부터 도출된 수요 횡방향 미끄럼 마찰계수와 공급 횡방향 미끄럼 마찰계수를 주행 역학적 안전성 관점에서 비교하였다. 주행속도와 공급 설계속도를 비교한 결과, 평면 곡선반경 약 200m 이하 구간에서 주행속도가 공급 설계 속도를 초과하는 것으로 나타났으며, 평면 곡선반경에 작을수록 두 속도 사이의 차이가 큰 경향을 나타냈다. 유사하게, 평면 곡선반경 약 200m이하 구간에서 수요 횡방향 미끄럼 마찰계수가 공급 횡방향 미끄럼 마찰계수를 초과하는 것으로 나타났으며, 평면 곡선반경이 작을수록 두 값 사이의 차이가 큰 경향을 나타냈다.

• 한국포장학회지
• /
• 제21권2호
• /
• pp.61-65
• /
• 2015

Agricultural products packaged for transportation are put in the various dangerous environments owing to the damage factors like vibration, shock, compression, climate etc. under the distribution process. On fruits packaging for transportation, especially, the shock and vibration is considered as the most important damage factors. A major cause of shock damage to fruits is drops during manual handling. Especially, the damages of fruits during the parcel delivery service are very serious. The parcel delivery services of fruits are increasing and contribute to increasing of farm house earning. Also, the freight vehicle is mostly used to transport the fruits. Shock and impact generated by the freight vehicle may give serious damage to fruits. The optimum packaging design of parcel delivery service of fruits during transportation is required to reduce the fruits damages. In order to design the packaging system for parcel delivery service of fruits considering the transportation environment, the comprehension of characteristics for vibration and shock generated by manual handling and acting on transportation vehicles under various road conditions and loading methods is required. This research was performed to analyze the shock characteristics, acceleration level and power spectral density (PSD) during the parcel delivery service of fruits. The overall level of recommended PSD profile in a specific transportation of parcel delivery service for fruits was $0.63G_{rms}$.

• 제어로봇시스템학회논문지
• /
• 제5권4호
• /
• pp.496-503
• /
• 1999

In this paper, the improvement of cap tilting system in heavy truck and the development of program for automatic design are discussed. Cab tilting system takes some important roles in heavy truck, absorbing discomfort vibration from load, increasing repair efficiency and making sure of safety. Common manual cab tilting system cannot be easily tilt up in sloped road, giving difficulty to driver as cal tilting up/down. So recently hydraulic cab tilting system is in wide use. But some problem such as tilting up/down speed is not constant and sudden swing of cab has brought discredit from user. Therefore, this paper presents advanced cab tilting system which prevents sudden swing of cab and development of program for selecting design parameters automatically.