• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.347-347
• /
• 2017

This study is performed to investigate the optimal cropping systems to allow cultivation of upland crops to the paddy rice land. This experiment was conducted at Anseong-si Gyeonggi province of Korea in 2015. In order to investigate growth and yield characteristics of foxtail millet, proso millet and sorghum by different paddy-upland rotation systems, three crops foxtail millet, proso millet and sorghum with four varieties of Samdachal, Samdamae, Kyeongkwan1, Hwanggeumjo in foxtail millet, Leebaekchal, Manhongchal, Hwangsilchal, Hwanggeumgijang in proso millet and Nampungchal, Moktaksusu, Aneunbangisusu, Hwanggeumchal in sorghum were examined. Four paddy-upland rotation systems of paddy-upland rotation, paddy-upland-upland rotation, paddy-upland-upland-upland rotation, and upland-paddy-upland rotation system were tested. Days from seeding to heading and ripening of foxtail millet was the shortest in the paddy-upland-upland-upland rotation system, but proso millet and sorghum did not show statistical difference among four rotation systems. In the average of culm length, paddy-upland-upland-upland rotation system showed the highest culm length in foxtail millet (141.5cm), proso millet (159.6cm) and sorghum (138.6cm) respectively among four paddy-upland rotation systems. In average yield per 10a, foxtail millet and proso millet showed the highest each 234.3kg/10a, 176.2kg/10a in paddy-upland-upland-upland rotation system, whereas sorghum was the highest 221.2kg/10a in paddy-upland-upland rotation system. The most suitable crop and varieties in paddy-upland rotation system was judged to be sorghum among three crops and suitable varieties were Samdachal in foxtail millet, Leebaekchal in proso millet and Nampungchal in sorghum respectively.

• 한국멀티미디어학회논문지
• /
• 제19권5호
• /
• pp.865-873
• /
• 2016

In recent years, Tracking-Learning-Detection(TLD) system has been widely used as a detection and tracking algorithm for vision sensors. While conventional algorithms are vulnerable to occlusion, and changes in illumination and appearances, TLD system is capable of robust tracking by conducting tracking, detection, and learning in real time. However, the detection and tracking algorithms of TLD system utilize rotation-variant features, and the margin of tracking error becomes greater when an object makes a full out-of-plane rotation. Thus, we propose a rotation-invariant TLD system(RI-TLD). we propose a simplified average orientation histogram and rotation matrix for a rotation inference algorithm. Experimental results with various tracking tests demonstrate the robustness and efficiency of the proposed system.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제27회 춘계학술대회
• /
• pp.286-291
• /
• 1998

The aim of this paper is to measure the tappet rotation in OHC valve train system. Tappet is eccentric from the cam center to rotate for preventing the partial wear. The experimental system is developed to measure the tappet rotation by using the laser beam and optical fiber. The characteristics of tappet rotation is presented for various operating conctitions. Specially, it is observed that tappet is rotated at the base circle.

• 대한인간공학회지
• /
• 제32권5호
• /
• pp.429-435
• /
• 2013

Objective: This study aims to analyze job satisfaction and accident prevention according to job rotation system types in a motor company. Background: The study of a motor company's job rotation system has come to attention with enhancing productivity, preventing musculoskeletal disorders, and improving quality. Method: In this study, a survey was conducted to show job satisfaction rates according to job rotation systems. Also an investigation was done regarding industrial accidents and previous workers who are receiving treatment for musculoskeletal disorder over the last five years. Results: The job rotation system in this study has been carried out by voluntary decision of workers. Out of the job rotation types, the medium rotation complexity type had high job satisfaction whereas in a high or low rotation complexity type, which many workers prefer, led to less number of accidents and days of sick leave. Application: The results of this study are expected to be a fundamental data to job design.

• Tribology and Lubricants
• /
• 제14권3호
• /
• pp.81-86
• /
• 1998

The purpose of this paper is to measure the rotational speed of tappet in OHC valve train system. Tappet has eccentricity about cam center, which induces the tappet rotation and prevents from wear. In this paper, the experimental test rig which composes of one cam system is developed to measure the tappet rotation by using the laser generating system, rotary encoder, optical fiber, and photo transistor. The direction of tappet rotation is judged from the oder of optical signal. As results of experiment, average and instant rotational speed and average rotation angle per one cam revolution are presented. Measured results show that eccentricity ratio is dominant factor for the tappet rotation, and tappet is rotated at the base circle.

• 전기학회논문지
• /
• 제58권3호
• /
• pp.605-613
• /
• 2009

In this paper, we studied for the real-time azimuthal measurement of HMD (Head Mounted Display) to control the tele-operated vision system on the mobile robot. In the preexistence tele-operated vision system, a joystick was used to control the pan-tilt unit of the remote camera system. To give the sense of presence to the tele-operator, we used a HMD to display the remote scene, measured the rotation angle of the HMD on a real time basis, and transmitted the measured rotation angles to the mobile robot controller to synchronize the pan-tilt angles of remote camera with the HMD. In this paper, we suggest an algorithm for the real-time estimation of the HMD rotation angles using feature points extraction from pc-camera image. The simple experiment is conducted to demonstrate the feasibility.

• 한국전문물리치료학회지
• /
• 제20권2호
• /
• pp.60-68
• /
• 2013

The purpose of this study was to assess the intra-rater test-retest reliability of tibial external rotation angle measurement using a smartphone-based photographic goniometer, DrGoniometer (DrG) compared to a three-dimensional motion analysis system (Vicon). The current study showed an interchangeable method using DrG to measure the tibial external rotation angle in standing knee flexion at $90^{\circ}$. Twelve healthy subjects participated in this study. A rest session was conducted 30 minutes later for within-day reliability and five days later for between-day intra-rater test-retest reliability. To assess the validity of the measurement using DrG, we used a three dimensional motion analysis system as a gold standard to measure the angle of tibial external rotation. Intra-class correlation coefficient (ICC) and the standard error of measurement (SEM) values were used to determine the within- and between- day intra-rater test-retest reliability of using DrG and a three dimensional motion analysis system. To assess validity, Pearson correlation coefficients were used for two measurement techniques. The measurement for tibial external rotation had high intra-rater test-retest reliability of within-day (ICC=.88) and between-day (ICC=.83) reliability using DrG and of within-day (ICC=.93) and between-day (ICC=.77) reliability using a three-dimentional motion analysis system. Tibial external rotation angle measurement using DrG was highly correlated with those of the three-dimensional motion analysis system (r=.86). These results represented that the tibial external rotation angle measurement using DrG showed acceptable reliability and validity compared with the use of three-dimensional motion analysis system.

• Journal of Information Processing Systems
• /
• 제16권1호
• /
• pp.120-131
• /
• 2020

In order to solve the problem of point clouds coordinate conversion of non-directional scanners, this paper proposes a basic Rodrigues rotation method. Specifically, we convert the 6 degree-of-freedom (6-DOF) rotation and translation matrix into the uniaxial rotation matrix, and establish the equation of objective vector conversion based on the basic Rodrigues rotation scheme. We demonstrate the applicability of the new method by using a bar-shaped emboss point clouds as experimental input, the three-axis error and three-term error as validate indicators. The results suggest that the new method does not need linearization and is suitable for optional rotation angle. Meanwhile, the new method achieves the seamless splicing of point clouds. Furthermore, the coordinate conversion scheme proposed in this paper performs superiority by comparing with the iterative closest point (ICP) conversion method. Therefore, the basic Rodrigues rotation method is not only regarded as a suitable tool to achieve the conversion of point clouds, but also provides certain reference and guidance for similar projects.

• Journal of Biosystems Engineering
• /
• 제26권3호
• /
• pp.271-278
• /
• 2001

Many workers in the garlic peeling factory are separating the sound peeled garlics from the unpeeled and defective ones in a manual way. In order to reduce the seasonal labor requirement and operating cost, the mechanized garlic sorting system such as the vision-based garlic sorter should be developed. This study was conducted as one of basic studies on developing quality evaluation technique for peeled garlics, especially to developed the system for acquiring the whole surface images of garlics with a CCD camera. The following results were obtained from this study. 1. The belt-type garlic rotation system was devised to apply for the vision-based garlic sorter and was tested to decide the criteria of design and optimum conveying speed. 2. To evaluate the performance of the developed garlic rotation system, feeding rate and rotating rate were measured under the conditions of four experimental factors such as the inclined angle of rotating belt, the inclined angle of feeding belt, the height of plate arrays on feeding belt and the conveying speed of belts. And the capacity of the system according to mixture ratios of peeled garlics and unpeeled garlics was analyzed as a feasibility test. 3. For the inclined angle of rotating belt 20°and height of plate array on feeding belt 22㎜, the maximum rotating rate for garlic samples including unpeeled ones was 81.1% at the conveying speed of 4.2 garlic/sec. And under these condition, the maximum feeding rate was 85% at the inclined angle of feeding belt 6.5°. 4. The capacity of the developed garlic rotation system was almost constant regardless of mixture ratio of peeled garlics and unpeeled garlics and its range was 2.95∼3.92 garlic/sec. At the conveying speed of 4.2 garlic/sec, the capacity of the garlic rotation system was calculated ad 58∼64 kg/hr. 5. To improve performance of the garlic rotation system, it is recommended to develop a device to slide garlics into feeding belt.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권3호
• /
• pp.207-212
• /
• 2017

Purpose: This article provides an efficient cushion molding method for improving reliability of the rotation driving system. Method: Allowable stress level for cushion is calculated by using physical characteristics of the rotation driving system. In addition, various test units are manufactured and used to conduct the rebound resilience, the burst pressure and the alternating load test. Results: Actual allowable stress level and test results of the rebound resilience, the burst pressure and the alternating load test are provided. Conclusion: The cushion manufactured by the compression molding method gives more preferable characteristics for improving the reliability of the rotation driving system.