• Journal of the Korean Society of Safety
• /
• v.38 no.4
• /
• pp.47-53
• /
• 2023

In the inspection of workplace hazards/risk factors by specialized institutions dedicated to safety management, inspection reports vary based on the inspectors, who lack the authority to enforce improvement of workplace hazards/risk factors. Thus, improvement and accident rates remain steady without decreasing. This study performed a regression analysis on the relationship between improvement and accident rates of categorized inspection items by classifying hazards/risk factors from inspection reports submitted by a specialized safety management institution in Chungbuk after inspecting 10 food and beverage manufacturers over the past three years. The hazards/risk factors were classified into five categories: mechanical, electrical, chemical, human, and environmental. The regression analysis revealed that the improvement rate of hazards/risk factors inspected by the specialized safety management institution influenced accident rates. To enhance improvement rates based on these findings, this study prioritized the correction of the five most frequently cited inspection items with the lowest improvement rates in each area. Based on these inspection items, this study suggested a checklist for use in workplace safety inspections of food manufacturers. This proposed checklist is expected to reduce accident rates in food manufacturing facilities. Currently, guidance and inspection of workplaces are mainly focused on accident rates rather than correcting hazards/risks. Thus, accident rates remain unchanged as workplace risks are inadequately improved according to the unique characteristics of each workplace. When conducting workplace guidance and inspection, policy measures and inspection methods are warranted to increase the improvement rate of hazards/risks.

• Safety and Health at Work
• /
• v.4 no.4
• /
• pp.201-209
• /
• 2013

Background: The study was conducted to investigate the current status of the occupational health and safety management system (OHSMS) in the construction industry and the effect of OHSMS on accident rates. Differences of awareness levels on safety issues among site general managers and occupational health and safety (OHS) managers are identified through surveys. Methods: The accident rates for the OHSMS-certified construction companies from 2006 to 2011, when the construction OHSMS became widely available, were analyzed to understand the effect of OHSMS on the work-related injury rates in the construction industry. The Korea Occupational Safety and Health Agency 18001 is the certification to these companies performing OHSMS in South Korea. The questionnaire was created to analyze the differences of OHSMS awareness between site general managers and OHS managers of construction companies. Results: The implementation of OHSMS among the top 100 construction companies in South Korea shows that the accident rate decreased by 67% and the fatal accident rate decreased by 10.3% during the period from 2006 to 2011. The survey in this study shows different OHSMS awareness levels between site general managers and OHS managers. The differences were motivation for developing OHSMS, external support needed for implementing OHSMS, problems and effectiveness of implementing OHSMS. Conclusion: Both work-related accident and fatal accident rates were found to be significantly reduced by implementing OHSMS in this study. The differences of OHSMS awareness between site general managers and OHS managers were identified through a survey. The effect of these differences on safety and other benefits warrants further research with proper data collection.

• Journal of the Korean Society of Safety
• /
• v.16 no.4
• /
• pp.140-146
• /
• 2001

In construction industry, workers' accident rates are relatively high compared to those of other industries. These high accidents rates are mostly due to the characteristics of construction process. In order to effectively reduce the accident rates, it is required to develop not only immediate measures but also long-term programs of instruction, training, and education. In addition, well-analyzed information on past history is required for the prevention of accidents. By examining about 800 cases of construction accidents that happened between Jan. 1992 and Dec. 2000, this paper developed an information system that provides appropriated safety information to the construction workers. This system is expected to contribute to the workers' safety in construction industry.

• Journal of Korean Society of Forest Science
• /
• v.102 no.4
• /
• pp.550-559
• /
• 2013

This study looked over the laws and regulations related to forestry workers to analyze the safety accident rates for the past five years (2006-2010), and to suggest improvement plans to reduce the safety accident rates of forestry workers. Findings from comparing information obtained from data are outlined below. The safety accident rates had gradually increased in the forestry fields until 2010, but nowaday it is on the decline. Furthermore, the safety accident rates in the field of forestry were still serious compared to those in the other industrial fields as from 2.1 to 5.1 times. In the results, the workers were especially vulnerable to safety accidents when they fell under the following categories: when falling; within 29 to 90 days after starting the work; over 60 years old; less than one month of service; October; Wednesday; 11 a.m.; and the nether limbs of the body. In the case of Jeollabuk-do, it was reported that more than half of victims did not have any training in safety.

• Journal of the Korean Society of Safety
• /
• v.14 no.2
• /
• pp.127-139
• /
• 1999

Two studies were conducted to examine the relationship between self-efficacy beliefs and industrial accidents. In the preliminary study, focus group interviews were conducted with employees working in manufacturing and construction sector, safety managers, and government officials to understand factors that were associated with industrial accidents. Based on interviews, a questionnaire survey was constructed to assess individual factors (such as self-efficacy beliefs, following safety procedures, life-satisfaction, and stress) that were identified as affecting industrial accidents (such as minor and major accident rates). The questionnaire were administered to a total of 917 respondents (542 employees working in the manufacturing and construction sector, 210 safety managers, and 165 government employee officials overseeing government regulations). The result indicated that three subscales of self-efficacy for employees (self-regulation, enlisting social support, and controlling the environment) were negatively correlated with the company's industrial accident rates. Moreover, those employees with higher self-efficacy were more likely to follow safety procedures and had higher life-satisfaction and lower stress levels. For safety managers, the self-efficacy beliefs were positively correlated with better implementation and higher effectiveness of the educational programs and negatively correlated with their company's accident rates.

• Journal of Korean Society of Transportation
• /
• v.12 no.1
• /
• pp.5-24
• /
• 1994

The purpose of this study is to develop an accident hazard index model in order to be used for the evaluation of regional traffic safety and to develop a driver violation index model in order to identify the primary causes of traffic accidents. The accident hazard index model was developed considering the accident rates based on population and the vehicle registration. The driver violation index model was developed considering the accident rates of each item of driver violation. Using the models developed in this study, it is identified that in the provincial level analysis the degree of the traffic safety of Chungbuk, Chungnam, and Kyungbuk Province are evaluated to be low. In the county level analysis of Kyungnam Province, the degree of the traffic safety of Yangsan, Euirung, Haman, Sachun and Tongyung County are evaluated to be low. Also, it is found that the major driver violations causing accidents in the nation are driving by unlicensed drives, improper passing, and improper railroad crossing : in Kyungnam Province, improper passing is the most driver violation.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.2
• /
• pp.157-163
• /
• 2021

The accident rate is obtained by dividing the number of accidents by the number of regular workers. In the case off construction work, however, the accident rates are not accurately figured out, because they use the approximate number of regular workers, which is estimated based on the amount of construction work and the labor ratio. In addition, the current accident rate estimation method does not reflect the characteristics of construction types, such as building, civil, plant, etc. This study is conducted with the aim of presenting a supplementary method of accident rate assessment that incorporates the characteristics of type of construction. For the purpose of this, correlation and regression analysis are executed to verify the relationships between number of accidents and the amount of construction contract, and several equations are derived which shows the relationship between the number of accidents by accident types and amount of constract by construction types. The result shows that the non-residential work amount and the number of accidents showed a proportional relationship, while the civil work amount and the number of accidents showed an inversely proportional relationship. The results of this research are expected to calibrate the construction accident rates and to be used as an auxiliary indicator to determine the trend of annual accident rates by comparing the values with usual years.

• Safety and Health at Work
• /
• v.9 no.2
• /
• pp.140-143
• /
• 2018

Background: The Occupational Safety and Health Monitoring and Assessment Tool (OSH-MAT) is a practical instrument that is currently used in the German woodworking and metalworking industries to monitor safety conditions at workplaces. The 12-item scoring system has three subscales rating technical, organizational, and personnel-related conditions in a company. Each item has a rating value ranging from 1 to 9, with higher values indicating higher standard of safety conditions. Methods: The reliability of this instrument was evaluated in a cross-sectional survey among 128 companies and its validity among 30,514 companies. The inter-rater reliability of the instrument was examined independently and simultaneously by two well-trained safety engineers. Agreement between the double ratings was quantified by the intraclass correlation coefficient and absolute agreement of the rating values. The content validity of the OSH-MAT was evaluated by quantifying the association between OSH-MAT values and 5-year average injury rates by Poisson regression analysis adjusted for the size of the companies and industrial sectors. The construct validity of OSH-MAT was examined by principle component factor analysis. Results: Our analysis indicated good to very good inter-rater reliability (intraclass correlation coefficient = 0.64-0.74) of OSH-MAT values with an absolute agreement of between 72% and 81%. Factor analysis identified three component subscales that met exactly the structure theory of this instrument. The Poisson regression analysis demonstrated a statistically significant exposure-response relationship between OSH-MAT values and the 5-year average injury rates. Conclusion: These analyses indicate that OSH-MAT is a valid and reliable instrument that can be used effectively to monitor safety conditions at workplaces.

• Proceedings of the KOR-KST Conference
• /
• 1997.12a
• /
• pp.33-69
• /
• 1997

This study was conducted to develop a methodology to predict utility pole accident rates and to evaluate cost-effectiveness for safety improvement for utility pole accidents. The utility pole accident rate prediction model was based on the encroachment rate approach introduced in the Transportation Research Board Special Report 214. The utility pole accident rate on a section of highway depends on the roadside encroachment rate and the lateral extent of encroachment. The encroachment rate is influenced by the horizontal and vertical alignment of the highway as well as traffic volume and mean speed. The lateral extent of encroachment is affected by the horizontal and vertical alignment, the mean speed and the roadside slope. An analytical method to generate the probability distribution function for the lateral extent of encroachment was developed for six kinds of encroachment types by the horizontal alignment and encroachment direction. The encroachment rate was calibrated with the information on highway and roadside conditions and the utility pole accident records collected on the sections of 55mph speed limit of the State Trunk Highway 12 in Wisconsin. The encroachment rate on a tangent segment was calibrated as a function of traffic volume with the actual average utility pole accident rates by traffic volume strategies. The adjustment factors for horizontal and vertical alignment were then derived by comparing the actual average utility pole accident rates to the estimations from the model calibrated for tangent and level sections. A computerized benefit-cost analysis procedure was then developed as a means of evaluating alternative countermeasures. The program calculates the benefit-cost ratio and the percent of reduction of utility pole accidents resulting from the implementation of a safety improvement. This program can be used to develop safety improvement: alternatives for utility pole accidents when a predetermined performance level is specified.

• Proceedings of the KOR-KST Conference
• /
• 1997.12b
• /
• pp.35-72
• /
• 1997

This study was conducted to develop a methodology to predict utility pole accident rates and to evaluate cost-effectiveness for safety improvement for utility pole accidents. The utility pole accident rate prediction model was based on the encroachment rate approach introduced in the Transportation Research Board special Report 214. The utility pole accident rate on a section of highway depends on the roadside encroachment rate and the lateral extent of encroachment. The encroachment rate is influenced by the horizontal and vertical alignment of the highway as well as traffic volume and mean speed. The lateral extent of encroachment is affected by the horizontal and vertical alignment, the mean speed and the roadside slope. An analytical method to generate the probability distribution function for the lateral extent of encroachment was developed for six kinds of encroachment types by the horizontal alignment and encroachment direction. The encroachment rate was calibrated with the information on highway and roadside conditions and the utility pole accident records collected on the sections of 55mph speed limit of the State Trunk Highway 12 in Wisconsin. The encroachment rate on tangent segment was calibrated as a function of traffic volume with the actual average utility pole accident rates by traffic volume strategies. The adjustment factors for horizontal and vertical alignment were when derived by comparing the actual average utility pole accident rates to the estimations from the model calibrated for tangent and level sections. A computerized benefit-cost analysis procedure was then developed as a means of evaluating alternative countermeasures. The program calculates the benefit-cost ratio and the percent of reduction of utility pole accidents resulting from the implementation of a safety improvement. This program can be used to develop safety improvement alternatives for utility pole accidents when a predetermined performance level is specified.