• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1732-1750
• /
• 2010

Operation of KORAIL's level crossing is in charge of KORAIL. As taking over existing level crossing to KORAIL, they do not conduct risk assessments, so we do not know about any possibilities of inner risk. And present operation of safety of the level crossing is just regular checking of reaction and functions of safety equipments physically, we need to react to the changes of what's going on around of level crossing and incestigation of traffic flow and surrounding conditions more spontaneously. So, we have to prepare the strategies against accidents of level crossing cost-effectively based on regular risk assessments for sustainable safety improvements and overcome operational problems of present level crossing's safety. Here, we're going to investigate the level of safety level and present risk factors of the level crossing using risk assessments for accidents/error of the equipments to show operational strategies of level crossing based on risk assessments.

• Safety and Health at Work
• /
• v.12 no.4
• /
• pp.496-504
• /
• 2021

Background: With the increasing demand for industrial robots and the "noncontact" trend, it is an appropriate point in time to examine whether risk assessments conducted for robot operations are performed effectively to identify and eliminate the risks of injury or harm to operators. This study discusses why robot accidents resulting in harm to operators occur repetitively despite implementing control measures and proposes corrective actions for risk assessments. Methods: This study collected 369 operator-injured robot accidents in Korea over the last decade and reconstructed them into the mechanism of injury, work being undertaken, and bodily location of the injury. Then, through the techniques of Systematic Cause Analysis Technique (SCAT) and Root Cause Analysis (RCA), this study analyzed the root and direct causes of robot accidents that had occurred. Causes identified included physical hazards and complex combinations of hazards, such as psychological, organizational, and systematic errors. The requirements of risk assessments regarding robot operations were examined, and three case studies of robot-involved tasks were investigated. The three assessments presented were: camera module processing, electrical discharge machining, and a panel-flipping robot installation. Results: After conducting RCA and comparing the three assessments, it was found that two-thirds of injury-occurring from robot accidents, causative factors included psychological and personal traits of robot operators. However, there were no evaluations of the identifications of personal aspects in the three assessment cases. Conclusion: Therefore, it was concluded that personal factors of operators, which had been overlooked in risk assessments so far, need to be included in future risk assessments on robot operations.

• Journal of the Korea Safety Management & Science
• /
• v.4 no.4
• /
• pp.15-26
• /
• 2002

The quantitative evaluation method of the safety management cost was suggested to prevent a gas accident as a major industrial accident. In a gas governor station, process risk assessments such as the fault tree analysis(FTA) and the consequence analysis were performed. Based on process risk assessments, potential accident costs were estimated and the cost-benefit analysis(CBA) was performed. From the cost-benefit analysis for five classification items of safety management cost, the order of the cost/benefit ratio was estimated.

• Water Engineering Research
• /
• v.3 no.4
• /
• pp.215-234
• /
• 2002

Uncertainty in dam breach flood routing results was analyzed in order to provide the basis fer the investigation of their effects on the flood damage assessments and dam safety risk assessments. The Monte Carlo simulation based on Latin Hypercube Sampling technique was used to generate random values for two uncertain input parameters (i.e., dam breach parameters and Manning's n roughness coefficients) of a dam breach flood routing analysis model. The flood routing results without considering the uncertainty in two input parameters were compared with those with considering the uncertainty. This paper showed that dam breach flood routing results heavily depend on the two uncertain input parameters. This study indicated that the flood damage assessments in the downstream areas can be critical if uncertainty in dam breach flood routing results are considered in a reasonable manner.

• Safety and Health at Work
• /
• v.2 no.4
• /
• pp.328-335
• /
• 2011

Objectives: Depressive disorder (DD) is a complex disease, and the assessment of work ability in patients with DD is also complicated. The checklist depression (CDp) has recently been developed to support such work ability assessments and has been recommended for implementation in insurance medicine, starting with an analysis of the organisational and social contexts. The aim of this study was to identify the potential facilitators and barriers in the use of the CDp by insurance physicians (IPs) during work ability assessments of employees on sick leave due to DD. Methods: A qualitative research was conducted based on semi-structured interviews. The participants were IPs with at least one year of work experience in performing work ability assessments. The interviews were audiotaped, transcribed and analysed qualitatively. Results: Ten IPs (7 males, 3 females; mean 53 years) were interviewed. Important facilitators, which emerged for use of the CDp, were an oral introduction for colleagues and staff, support from management, valuing the increased transparency in work ability assessments with using the CDp, having adequate time for assessments as well as modification of the appearance (colour, plasticised form) and content (clarifying aspects of the examples) of the assessment tool. The fear of the loss of autonomy, lack of added value of the CDp, high workload, inadequate instructions and lack of time were mentioned as barriers. Conclusion: Adequate introduction to the use of CDp and the fear of the loss of autonomy of IPs need special attention in planning its implementation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.1725-1731
• /
• 2015

The study surveyed the health risk factors and risk assessments status preventing accidents and incidents in beauty workplaces. In addition, the health safety awareness technicality was categorized. The research results were as follows. Beauty workers (about 60%) were exposed to health hazards regarding the skin, respiratory, muscle system during more than half of their working hours. On the other hand, they recognized the need for risk assessments in the workplace. The health safety awareness in the workplace differed according to the status of the risk assessment and the category of business. This provides the basic data that can be activated to manage health safety standards for workers and an unspecified number of people.

• Nuclear Engineering and Technology
• /
• v.49 no.2
• /
• pp.373-379
• /
• 2017

Seismic probabilistic safety assessments are used to help understand the impact potential seismic events can have on the operation of a nuclear power plant. An important component to seismic probabilistic safety assessment is the seismic hazard curve which shows the frequency of seismic events. However, these hazard curves are estimated assuming a normal distribution of the seismic events. This may not be a strong assumption given the number of recorded events at each source-to-site distance. The use of a normal distribution makes the calculations significantly easier but may underestimate or overestimate the more rare events, which is of concern to nuclear power plants. This paper shows a preliminary exploration into the effect of using a distribution that perhaps more represents the distribution of events, such as the t-distribution to describe data. The integration of a probability distribution with potentially larger tails basically pushes the hazard curves outward, suggesting a different range of frequencies for use in seismic probabilistic safety assessments. Therefore the use of a more realistic distribution results in an increase in the frequency calculations suggesting rare events are less rare than thought in terms of seismic probabilistic safety assessment. However, the opposite was observed with the ground motion prediction equation considered.

• Journal of the Korean Society of Safety
• /
• v.10 no.2
• /
• pp.120-128
• /
• 1995

The fatigue failure of rail is a principal source of derailment accidents. The reduction of fatigue failures can be achieved by Intensive track maintenance and periodic safety assessments for the railway. For the safety assessments, it is required to have more accurate knowledge for fatigue behavior such as the crack initiation, propagation, crack growth rate and the remaining service life in rail. In this paper, the mean stress effects for the fatigue behavior of rail steel are studied. For this study, the fatigue test is conducted and some equations for fatigue evaluation are applied and compared. From the results, we can see that the fatigue crack growth rate is the more increased as the men stress Is the more increased, the mean stress effect is represented well by the combination of stress intensity factor range and maximum stress intensity factor and Crooker and Range's equation represented by ${\Delta}K, K_{max}$ is the best fit for fatigue evaluation and safety assessment of rail.

• Proceedings of the Safety Management and Science Conference
• /
• 2007.11a
• /
• pp.299-303
• /
• 2007

This paper deals with conformity assessments requirements for accreditation and certification bodies. This study also introduces conformity guidances of product certification and code of good practice. This paper presents general requirements for accreditation, recognition and registration bodies of environmental quality system and product certification.

• Journal of the Korea Safety Management & Science
• /
• v.25 no.2
• /
• pp.9-15
• /
• 2023

The Severe Disaster Punishment Act had recently been established in order to promote safety and health (OSH) management system for severe accident prevention. OSH management system is primarily designed based on risk assessments; however, companies in industries have been experiencing difficulties in hazard identification and selecting proper measures for risk assessments and accident prevention. This study intended to introduce an accident analysis method based on epidemiological model in finding hazard and preventive measures. The accident analysis method employed in this study was proposed by the U.S. Department of Energy. To demonstrate the effectiveness of the accident analysis method, this study applied it to two accident cases occurred in construction and manufacturing industries. The application process and results of this study can be utilized in improving OSH management system and preventing severe accidents.