• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.926-929
• /
• 2003

The dissolved oxygen sensor of thick film type was fabricated by screen print method and measured the characteristic, reference electrode used Ag/AgCl, and working electrode used Pt. The devices are continuously powered at potential of $0.7V{\sim}0.8V$ versus Ag/AgCl reference electrode and results indicated that the response characteristic of sensor was $1.002{\mu}A{\sim}19.792{\mu}A$ for thirty seconds. we can know that it is good linearity when compared with of existent dissolved oxygen meter. Therefore sensor fabricated excels sensitivity for dissolved oxygen and will be considered to be applied typically because the price is costly.

• 한국HCI학회:학술대회논문집
• /
• 2008.02b
• /
• pp.173-178
• /
• 2008

Due to a rapid increase in demand for bigger-screen-equipped mobile phones in recent years, many big-name-manufactures have been releasing touch-screen-enabled devices. In this paper, various touch-screen-input methods have been summarized into 6 different categories. How? By tracing each user's finger print path, user's input pattern and behavior have been carefully recorded and analyzed. Through this analysis, what to be considered before designing UI is presented in great details.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.9
• /
• pp.827-832
• /
• 2005

Dual band internal antennas were fabricated with Ag conducting paste of various preparation conditions and different print thickness by silk screen print. We have investigated microwave properties were compared Ag conducting paste antenna with copperplate antenna at 800 MHz and 1,800 MHz. Gain of Ag conducting paste antenna was improved when preparation conditions were the single size Ag particle, using dry type resin and high Ag containing percent. However, it was lower than that of copperplate antenna within $0.1\~2.0dBi$ at 800MHz. In addition, it was improved at 800MHz when thickness of Ag conducting paste was printed more than skin depth but it was held after critical print thickness. On the other hand, it was reached level of copperplate antenna at 1,800MHz.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.29 no.1
• /
• pp.75-83
• /
• 2011

As screen printing is changed by automation recently, could print more exactly. However, must suffer great many trial and error to have still gotten perfect result. By the way, at this step, fair time and money should be invested. Therefore, if search for optimum condition in early time visualizing screen printing process using simulator program before progress printing, is judged that may be correct and gets printing result efficiently. In this paper, searched optimum printing speed and ink viscosity using FLOW-3D program. Also, the result could confirm truth that is agreeing almost with experiment contents. Through this, is thought that may expect extension of screen printing wide application that vivify advantage of screen print if use simulation program.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.20 no.2
• /
• pp.31-43
• /
• 2002

Screen printing is a stencil process whereby ink is transferred to the substrate through a stencil supported by a fine fabric mesh. Therefore screen had a tendency to distort and swell, as ink was deposited between the fibers, and were difficult to clean. The tow importance of stencil parameters that affect print quality are stencil thread diameter and the fabric thickness because of their influence on both ink deposit and print definition. Since screen printing inks can be formulated to adhere to almost any surface, and the printing process itself can be handled almost any substrate in a wide variety of shape, screen printing is a very versatile process. The small size pronting is reproduced image used screen printing because the surface of substrates is not suited at screen printing method. In screen printing, the need of high definition printing is gradually increasing according to developing special inks. A conventional haftone, so called AM screening, is simple and easy to implement, but the haftone dot patterns by using this method are not free for the moire fringe. This paper is used densitometry and image analysis to investigate relation with printing according to screen mesh, opening size and resolution of copy in image reproduction used FM screen. We had the good result of dot gain and tone reproduction on the screen printing of high definition using FM screen.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.29 no.3
• /
• pp.125-132
• /
• 2011

Is very simple in tension work of screen mesh for effective printing if worker uses screen mesh of player who desire at screen print process. General method is methods that use mesh of player who want on screen frame as screen plate because tensioned. The single layer screen plate was made from one sheet screen mesh and the double layer screen plate was made from two sheets screen mesh overlapped. The thickness of sensitive emulsion applied to double layer screen plate is more thicker than two time s of thickness of emulsion applied to single layer screen plate. It seems that the sensitive emulsion inserted between an upper layer and a lower layer of double layer screen mesh.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.3
• /
• pp.66-71
• /
• 1998

This study was investigated to evaluate worker exposures to organic solvents by type of print industry. Results were as follows; 1. Workers were exposed to mixture of toluene, isopropyl alcohol(IPA), methyl ethyl ketone(MEK), n-hexane, ethylacetate(EA), acetone. The components of high exposure solvents were toluene, IPA and MEK. 2. Considering additive effects of the compounds, exposure indices(Em) were calculated. The Mean of exposure indices were 1.79 for Gravere, 0.41 for Screen and 0.14 for Opset workplace. The workers of Gravere workplace were estimated to overexpose for solvents. 3. The highest overexposed solvent was toluene for a single component. The rate of overexposed level for toluene was 7.41% for some print workplace and for mixed solvent was 1.85％. 4. Local exhaust systems were inappropriate and respiratory protective devices were not supplied to the workers. 5. Sound level was over 90dB(A) in Opset print workplace and some measures should be performed to get down the sound level.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.599-601
• /
• 2011

POD means system that can be print immediately when it is requested. For imagification of HTML data, COM component has problem that needs a lot of times. But it offers many types of supplementary services through endure delays of a reliable range to users this dissertation describes web based screen shot mechanism, procuration method for preview web site and utilization in POD system.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.546-546
• /
• 2012

Traditional screen printing is still a dominant method to print electrodes on c-Si solar cells. In order to achieve higher efficiency for c-Si solar cells, improvement of the electrode material is one of the key approaches. Shadowing loss can be reduced by using high aspect ratio finger electrode with width of finger electrode less than 80um. The rheological properties of Ag paste for applying c-Si solar cells are improved by using Ag nanowires. The printing properties including the aspect ratio of printed electrode can be improved with higher Thixotropic index (T.I.) values.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.66-69
• /
• 2007

We have investigated printing techniques for processing organic light-emitting diodes (OLEDs). We succeeded to gravure print uniform organic thin films as well as screen print low work function cathode for OLED structure. Furthermore, by using roll-to-roll manufacturing methods, we have been able to fabricate all-printed flexible OLED demonstrator.