• Proceedings of the Optical Society of Korea Conference
• /
• 2006.07a
• /
• pp.469-471
• /
• 2006

This paper describes a efficient insepction method of PCB PADs for AFVI. The methods for PCB inspection have been tried to detect the defects in PCB PADs, but their low detection rate results from pattern variations that are originating from etching, printing and handling processes. The adaptive inspection method has been newly proposed to extract minute defects based on dynamic segments and filters. The vertexes are extracted from CAM master images of PCB and then a lot of segments are constructed in master data. The proposed method moves these segments to optimal directions of a PAD contour and so adaptively matches segments to PAD contours of inspected images, irrespectively of various pattern variations. It makes a fast, accurate and reliable inspection of PCB patterns. Experimental results show that proposed methods are found to be effective for flexible defects detection.

• Korean Journal of Remote Sensing
• /
• v.22 no.1
• /
• pp.63-73
• /
• 2006

Currently, in order to achieve accurate geolocation of satellite images we need to generate control points from individual scenes. This requirement increases the cost and processing time of satellite mapping greatly. In this paper we investigate the feasibility of modeling entire image strips that has been acquired from the same orbital segments. We tested sensor models based on satellite orbit and attitude with different sets of unknowns. We checked the accuracy of orbit modeling by establishing sensor models of one scene using control points extracted from the scene and by applying the models to adjacent scenes within the same orbital segments. Results indicated that modeling of individual scenes with $2^{nd}$ order unknowns was recommended. In this case, unknown parameters were position biases, drifts, accelerations and attitude biases. Results also indicated that modeling of orbital segments with zero-degree unknowns was recommended. In this case, unknown parameters were attitude biases.

• Wind and Structures
• /
• v.34 no.2
• /
• pp.161-171
• /
• 2022

This paper presents a failure type assessment curve method to judge the failure type of transmission tower segments. This novel method considers the equivalent static wind load characteristics and the transmission tower members' load-bearing capacities based on numerical simulations. This method can help judge the failure types according to the relative positions between the actual state points and the assessment curves of transmission tower segments. If the extended line of the actual state point intersects with the horizontal part's assessment curve, the segment would lose load-bearing capacity due to the diagonal members' failure. Another scenario occurs when the intersection point is in the oblique part, indicating that the broken main members have caused the tower segment to fail. The proposed method is verified by practical engineering case studies and static tests on the scaled tower segments.

• Research in Mathematical Education
• /
• v.26 no.4
• /
• pp.271-289
• /
• 2023

This research investigates the development of elementary students' concepts of line segments, straight lines, and rays, employing metaphor analysis as a research methodology. By analyzing metaphorical expressions, the research aims to explore how elementary students form these geometric concepts line segments, straight lines, and lays and evolve their understanding of them across different grades. Surveys were conducted with elementary school students in grades three to six, focusing on metaphorical expressions and corresponding their reasons associated with line segments, straight lines, and rays. The data were analyzed through coding and categorization to identify the types in students' metaphorical expressions. The analysis of metaphorical expressions identified five types: straightness, infinity or direction, connections of another geometric concepts, shape and symbols, and terminology.

• Advances in pediatric surgery
• /
• v.5 no.1
• /
• pp.39-44
• /
• 1999

Diagnosing Hirschprung's disease is one of the clinical challenges of this disorder. In the stomach and the intestines, Cathepsin D was readily detected in cytoplasm of the rat gastric and in intestinal ganglion cells of the autonomic nervous system. The objectives of the present study were to examine cathepsin D expression in ganglion cells of the submucosal and myenteric plexuses of the intestine of children and to determine the utility of immunohistochemical staining of cathepsin D for detection of immature ganglion cells. Paraffin blocks of 35 intestinal segments were reviewed for immunohistochemical staining with polyclonal antibody to cathepsin D and hematoxylineosin stainings from the compatible specimens. There were 9 aganglionic segments and 9 ganglionic segments of neonates with Hirschsprung's disease, 8 intestinal segments with non-Hirschsprung's disease in neonates and 9 intestinal segments with non-Hirschsprung's disease infants over the age of 10 months. All ganglion cells showed intense granular cytoplasmic reactivity for cathepsin D regardless of maturity and all aganglionic segments had no expression for cathepsin D in the submucosal and myenteric plexuses of the intestine. However, histiocytes within the laminar propria and submucosa stained positively for cathepsin D. In conclusion, intestinal ganglion cells in children have reactivity for cathepsin D, threrfore immunohistochemical staining for cathepsin D can be used for identification of ganglion cells in neonates.

• Polymer(Korea)
• /
• v.29 no.2
• /
• pp.140-145
• /
• 2005

Effects of the polyol type and the hard segment content of thermoplastic polyurethane (TPU) on the crystallization of hard segments in TPUs were studied employing differential scanning calorimetry. Diols used for the preparation of TPUs were poly(tetramethylene ether glycol) (PTMEG), poly(propylene glycol) (PPG), polycaprolactone (PCL), poly(butylene adipate) (PBA) the molecular weights of which were 2000 and the hard segments contents of TPUs were $35\~44\;wt\%$. We found that crystallization of hard segments in TPUs were observed at higher temperatures and became faster with increasing hard segment contents of TPUs. The crystallization rate of TPU was also affected by the types of polyols used for the preparation of TPUs. It is postulated that lower miscibility of soft segments and hard segments results in higher crystallization rate and increase of cooling crystallization temperatures due to better hydrogen bending between hard segments in melts.

• Journal of Korean Society of Transportation
• /
• v.22 no.2 s.73
• /
• pp.87-93
• /
• 2004

A five-day work week has a great impact on the life styles of employed persons and their families. At the same time, the changes also impact on the transportation system because travel patterns, demand, and pattern of congestion change during weekends. The negative impacts on the transportation system should be examined in order to conceive measures to maintain dependable levels of service during weekends. The first step to pursue the issue is to identify the road segments heavily affected by augmented leisure trips. In this study, characteristics of highway segments are engineered by principal analysis using data from TCS database. Scores from principal analysis are employed to distinguish highway segments for leisure trips from total 197 segments considered in this study. In addition, indexes from principal analysis are proposed to identify highway segments for leisure trips.

• Journal of Fashion Business
• /
• v.21 no.4
• /
• pp.116-126
• /
• 2017

This study applied a segmented hard shell design on knee protectors for children with the objective of increasing mobility. The prototype of the hard shell that does not correspond to movement of the body among components of the knee protector was developed. Surface modeling was conducted based on 3D knee data to enhance comfort through optimized fit on the knee joint where the hard shell would be worn. For this, previous studies on changes in skin near the knee joint during knee flexion were reviewed to establish basic segmental lines. The basic design included six segments, and the number of segments was used as the design variable by increasing or decreasing it to 0, 3, 6, 9, and 14 segments. A prototype was produced from 3D printing with TPU material, worn for wearing assessment. Results revealed fewer numbers of segments resulting in less fit with the body, while actual appearance was stable. Meanwhile, the number of proper segments improved better fit with the body during movement. The wearing assessment revealed the amount of gap reflects change in skin length depending on movement. Assessment results demonstrated basic segment design, S6 with 6 segments, had the best design and most optimized fit. Findings in this study can provide key data for designing knee protection products for children.

• Journal of Korean Neurosurgical Society
• /
• v.57 no.5
• /
• pp.350-358
• /
• 2015

Objective : To evaluate the morphometry of the anterior thalamoperforating arteries (ATPA). Methods : A microanatomical study was performed in 79 specimens from 42 formalin-fixed adult cadaver brains. The origins of the ATPAs were divided into anterior, middle, and posterior segments according to the crowding pattern. The morphometry of the ATPAs, including the premammillary artery (PMA), were examined under a surgical microscope. Results : The anterior and middle segments of the ATPAs arose at mean intervals of $1.75{\pm}1.62$ mm and $5.86{\pm}2.05$ mm from the internal carotid artery (ICA), and the interval between these segments was a mean of $3.17{\pm}1.64$ mm. The posterior segment arose at a mean interval of $2.43{\pm}1.46$ mm from the posterior cerebral artery (PCA), and the interval between the middle and posterior segments was a mean of $3.45{\pm}1.39$ mm. The mean numbers of perforators were $2.66{\pm}1.19$, $3.03{\pm}1.84$, and $1.67{\pm}0.98$ in the anterior, middle, and posterior segments, respectively. The PMA originated from the middle segment in 66% of cases. A perforator-free zone was located >2 mm from the ICA in 30.4% and >2 mm from the PCA in 67.1% of cases. Conclusion : Most perforators arose from the anterior and middle segments, within the anterior two-thirds of the posterior communicating artery (PCoA). The safest perforator-free zone was located closest to the PCA. These anatomical findings may be helpful to verify safety when treating lesions around the PCoA and in the interpeduncular fossa.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.10a
• /
• pp.69-70
• /
• 1997

Polyimides and related polymers, when synthesized from aromatic monomers, have generally rigid chain structures resulting in a low gas permeability. The rigidity of polymer chains reduces the segmental motion of chains and works as a good barrier against gas transport. To overcome the limit of use as materials of gas separation membranes due to low gas permeability, block copolymers with the incorporation of flexible segments like siloxane linkage and ether linkage have been studied. These block copolymers have microphase-separated structures composed of microdomains of flexible poly(dimethylsiloxane) or polyether segments and of rigid polyimides segments. In case of rigid-flexible block copolymers, the characteristics of both phases for gas permeation are of great difference. The permeation of gas molecules occurs favorably through microdomains of flexible segments, whereas those of rigid segments hinder the permeation of gas molecules. Accordingly the increase of content of flexible segments in a rigid polymer matrix will increase the gas permeability of the membrane linearly. However, this prediction does not satisfy enough many experimental results and in particular the drastic increase of the permeability is observed in a certain volume fraction. It was proposed that the gas transport mechanism is dominated by diffusion rather than gas solubility in a certain content of flexible phase if solution-diffusion mechanism is adopted. However, the transition from solubility-dependent to diffusion-dependent cannot be explained by the understanding of mechanism itself. Therefore, we consider an effective chemical path which permeable phase can form in a microheterogenous medium, and percolation concept is introduced to describe the permeability transition at near threshold where for the first time a percolation path occurs. The volume fraction of both phases is defined as V$_{\alpha}$ and V$_{\beta}$ in block copolymers, and the volume of $\beta$ phase in the threshold forming geometrically a traversing channel is defined as V$_{\betac}$. The formation mechanism of shortest chemical channel is schematically depicted in Fig. 1.