• Journal of Sensor Science and Technology
• /
• v.31 no.3
• /
• pp.151-155
• /
• 2022

In this paper, we present a highly-sensitive gate/body-tied (GBT) metal-oxide semiconductor field-effect transistor (MOSFET)-type photodetector using multi-finger structure whose photocurrent increases in proportion to the number of fingers. The drain current that flows through a MOSFET using multi-finger structure is proportional to the number of fingers. This study intends to confirm that the photocurrent of a GBT MOSFET-type photodetector that uses the proposed multi-finger structure is larger than the photocurrent per unit area of the existing GBT MOSFET-type photodetectors. Analysis and measurement of a GBT MOSFET-type photodetector that utilizes a multi-finger structure confirmed that photocurrent increases in ratio to the number of fingers. In addition, the characteristics of the photocurrent in relation to the optical power were measured. In order to determine the influence of the incident the wavelength of light, the photocurrent was recorded as the incident the wavelength of light varied over a range of 405 to 980 nm. A highly-sensitive GBT MOSFET-type photodetector with multi-finger structure was designed and fabricated by using the Taiwan semiconductor manufacturing company (TSMC) complementary metal-oxide-semiconductor (CMOS) 0.18 um 1-poly 6-metal process and its characteristics have been measured.

• Communications for Statistical Applications and Methods
• /
• v.16 no.1
• /
• pp.169-183
• /
• 2009

The simplicity and wide application of Greenberg et al. (1971) prompts to propose a set of alternative estimators of population total for multi-character surveys that elicit simultaneous information on many. sensitive study variables. The proposed estimators take into account the already known rough value of the correlation coefficient between Y(the characteristic under study) and p(the measure of size). These estimators are biased, but it is expected that the extent of bias will be smaller, since the proposed estimators are suitable for situations in between those optimum for the usual estimators and the estimators based on multi-characters for no correlation. The relative efficiency of the proposed estimators has been studied under a super population model through empirical study. It has been found through simulation study that a choice of an unrelated variable in the Greenberg et al. (1971) model could be made based on its correlation with the auxiliary variable used at estimation stage in multi-character surveys.

• The Journal of Korean Society for School & Community Health Education
• /
• v.11 no.1
• /
• pp.41-55
• /
• 2010

Objectives: This study was conducted to identify the characteristics of health behavior and self-esteem and the relationship between the two factors among elementary school students with multi-cultural family background. Participants: Survey participants were 87 multi-cultural family children who lived in Seoul and Kyoungi areas and were registered in the local elementary schools. Methods: Data collection was conducted by face-to-face interview survey. Elementary education majored undergraduate students who participated in the education support program for multi-cultural family children in the Ministry of Education and Science and primary researcher of this study interviewed the target students and finished the survey questionnaire based on the students' responses. Survey included general characteristics, multi-cultural family characteristics, self-esteem, and (physical, mental, and social) health behavior. Results: 1. The self-esteem scores of the multi-cultural families children were greater in girl than boys among the children whose parents were graduated from college or more, and whose father had his job. The participants' health behavior scores were different by mothers' educational level. 2. The better they speak in English the greater the self-esteem scores. There was no statistical difference in health behavior scores by the participants' multi-cultural family background. 3. Self-esteem had moderate level correlation with health behavior (r= .56, p= .00) including all sub-categories of physical, mental, and social health. Conclusions: Positive self-esteem level is more sensitive to explain multi-cultural family children's health behaviors, which means that self-esteem is an important factor determining multi-cultural children's health behaviors and their health status in future. Therefore, more research to identify the factors related to health behaviors should be supported and the health promotion programs utilizing self-esteem should be developed for the child and youth with multi-cultural family backgrounds.

• The KIPS Transactions:PartA
• /
• v.12A no.5 s.95
• /
• pp.375-384
• /
• 2005

General purpose operating systems are Increasingly being used for serving time-sensitive applications. These applications require soft real-time characteristics from the kernel and from other system-level services. In this paper, we explore various operating systems techniques needed to support time-sensitive applications and describe the design of MUSMA(Multi-level Scheduler for Multimedia Application). MUSMA is a framework that combination of user-level top scheduler and kernel-level bottom scheduler. We develope MUSMA in linux environment and it's performance is evaluated. Experiment result shows that it is possible to satisfy the constraints of multimedia in a general purpose operating system without significantly compromising the performance of non-realtime applications.

• Journal of Korea Multimedia Society
• /
• v.19 no.10
• /
• pp.1775-1781
• /
• 2016

Generally, in the underwater target recognition, feature vectors are extracted from the target signal utilizing spatial information according to target shape/material characteristics. In addition, various signal processing techniques have been studied to extract feature vectors which are less sensitive to the location of the receiver. In this paper, we synthesized active echo signals using 3-dimensional highlight distribution. Then, Fractional Fourier transform was applied to echo signals to extract signal features. For the performance verification, classification experiments were performed using backpropagation and probabilistic neural network classifiers based on single aspect and multi-aspect method. As a result, we obtained a better recognition result using proposed feature extraction and multi-aspect based method.

• 유체기계공업학회:학술대회논문집
• /
• 1998.12a
• /
• pp.159-165
• /
• 1998

Bearing design of turbo type geared centrifugal air compressor for low vibration level has been studied. The Transfer Matrix Method was used in this paper to analyze the air-compressor consisting of impellers, multi-stage geared rotors, and oil-film hearings. We have to consider this air-compressor as multi-geared rotating system, because characteristics of rotor-bearing system are different from conventional characteristics of non-rotating system. From the view point of Rotordynamics, the stiffness and damping coefficient of oil-film bearing in case of compressor system are more sensitive than other design parameters such as shaft length, shaft diameter and the weight of impellers, etc. Therefore, the stiffness and damping coefficients on each bearing were considered as design parameters. As the result of this study, turbo type air compressor with low vibration level can be achieved.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.12
• /
• pp.34-41
• /
• 2011

In order to understand the thermal performance of each LED chips in multi-chip LED package, a quantitative parametric analysis of the temperature evolution was investigated by thermal transient analysis. TSP (Temperature Sensitive Parameter) value was measured and the junction temperature was predicted. Thermal resistance between the p-n junction and the ambient was obtained from the structure function with the junction temperature evolution during the cooling period of LED. The results showed that, the thermal resistance of the each LED chips in 4 chip-LED package was higher than that of single chip- LED package.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.9
• /
• pp.1878-1883
• /
• 2012

Generally, in the underwater target recognition, feature vectors are extracted from the target signal utilizing spatial information according to target shape/material characteristics. And, various signal processing techniques have been studied to extract feature vectors which is less sensitive to the location of the receiver. In this paper, we analyzed the characteristics of synthesized underwater objects using canonical correlation analysis method which is relatively less sensitive to the location of receiver. Canonical correlation analysis is applied to two consecutive backscattered sonar returns at different aspect angles to analyze the correlation characteristics in multi-aspect environment.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.384-388
• /
• 2000

One-port acoustic characteristics of an in-duct source can be measured by the multi-load method using an overdetermined set of open pipes with different lengths as applied loads. The input data. viz. load pressure and load impedance, are usually contaminated by measurement error in the actual measurements, which result in errors in the calculated source parameters. In this paper, the effects of the errors in the input data on the results have been studied numerically, varying the number of loads and their impedances in order to determine what combination of the loads will yield the best result. An error analysis is applied to each case of possible loads, which consist of open pipes. It is noted that, frequently, only a set of open pipes is used when applying the multi-load method to the intake or exhaust sides of internal combustion engines. A set of pipe lengths which cause the calculated results to be least sensitive to the input data error can be found when using open pipe loads. The present work is intended to produce guidelines for preparing an appropriate load set in order to obtain accurate source properties of fluid machines.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.2
• /
• pp.8-14
• /
• 2014

Many kinds of robots and machines have been developed to replace human laborin industrial and medical fields, as well as domestic life. In these applications, the device sneed to obtain environmental data using diverse sensors. Among such sensors, the tactile sensor is important because of its ability to get information regarding surface texture and force through the use of mechanical contact. In this research, a simple tactile sensor was developed using the direct writing of pressure sensitive material and layered fabrication of photocurable material. The body of the sensor was fabricated using layered fabrication, and pressure sensitive materials were dispensed between the layers using direct writing. We examined the line fabrication characteristics of the pressure sensitive material according to nozzle dispensing conditions. A simple $4{\times}4$ array flexible tactile sensor was successfully fabricated using the proposed process.