• International Journal of Highway Engineering
• /
• v.18 no.3
• /
• pp.109-114
• /
• 2016

PURPOSES : The demand for extending national highways is increasing, but traffic monitoring is hindered because of resource limitations. Hence, this study classified highway segments into 5 types to improve the efficiency of short-term traffic count planning. METHODS : The traffic volume trends of 880 highway segments were classified through R-squared and linear regression analyses; the steadiness of traffic volume trends was evaluated through coefficient of variance (COV), and the normality of the data were determined through the Shapiro-Wilk W-test. RESULTS : Of the 880 segments, 574 segments had relatively low COV and were classified as type 1 segments, and 123 and 64 segments with increasing and decreasing traffic volume trends were classified as type 2 and type 3 segments, respectively; 80 segments that failed the normality test were classified as type 4, and the remaining 39 were classified as type 5 segments. CONCLUSIONS : A theoretical basis for biennial count planning was established. Biennial count is recommended for types 1~4 because their mean absolute percentage errors (MAPEs) are approximately 10%. For type 5 (MAPE =19.26%), the conventional annual count can be continued. The results of this analysis can reduce the traffic monitoring budget.

• International Journal of Highway Engineering
• /
• v.17 no.4
• /
• pp.135-141
• /
• 2015

PURPOSES: This study has been conducted to determine a homogeneous segment and integration to improve the efficiency of short-term traffic count. We have also attempted to reduce the traffic monitoring budget. METHODS: Based on the statistical approach, a homogeneous segment in the same road section is determined. Statistical analysis using t-test, mean difference, and correlation coefficient are carried out for 10-year-long (2004-2013) short-term count traffic data and the MAPE of fresh data (2014) are evaluated. The correlation coefficient represents a trend in traffic count, while the mean difference and t-score represent an average traffic count. RESULTS : The statistical analysis suggests that the number of target segments varies with the criteria. The correlation coefficient of more than 30% of the adjacent segment is higher than 0.8. A mean difference of 36.2% and t-score of 19.5% for adjacent segments are below 20% and 2.8, respectively. According to the effectiveness analysis, the integration criteria of the mean difference have a higher effect as compared to the t-score criteria. Thus, the mean difference represents a traffic volume similarity. CONCLUSIONS : The integration of 47 road segments from 882 adjacent road segments indicate 8.87% of MAPE, which is within an acceptable range. It can reduce the traffic monitoring budget and increase the count to improve an accuracy of traffic volume estimation.

• Journal of Korean Society of Transportation
• /
• v.32 no.4
• /
• pp.380-388
• /
• 2014

Annual average daily traffic(AADT) serves as important basic data in the transportation sector. AADT is used as design traffic which is the basic traffic volume in transportation planning. Despite of its importance, at most locations, AADT is estimated using short term traffic counts. An accurate AADT is calculated through permanent traffic counts at limited locations. This study dealt with estimating AADT using various models considering both the spatial correlation and time series data. Kriging models which are commonly used spatial statistics methods were applied and compared with each model. Additionally the External Universal kriging model, which includes explanatory variables, was used to assure accuracy of AADT estimation. For evaluation of various kriging methods, AADT estimation error, proposed using national highway permanent traffic count data, was analyzed and their performances were compared. The result shows the accuracy enhancement of the AADT estimation.

• Journal of Korean Society of Transportation
• /
• v.20 no.6
• /
• pp.59-68
• /
• 2002

AADT(Annual Average Daily Traffic) can be obtained by using short-term counted traffic data rather than using traffic data collected for 365 days. The process is a very important in estimating AADT using short-term traffic count data. Therefore, There have been many studies about estimating AADT. In this Paper, we tried to improve the process of the AADT estimation based on the former AADT estimation researches. Firstly, we found the factor showing differences among groups. To do so, we examined hourly variables(divided to total hours, weekday hours. Saturday hours, Sunday hours, weekday and Sunday hours, and weekday and Saturday hours) every time changing the number of groups. After all, we selected the hourly variables of Sunday and weekday as the factor showing differences among groups. Secondly, we classified 200 locations into 10 groups through cluster analysis using only monthly variables. The nile of deciding the number of groups is maximizing deviation among hourly variables of each group. Thirdly, we classified 200 locations which had been used in the second step into the 10 groups by applying statistical techniques such as Discriminant analysis and Neural network. This step is for testing the rate of distinguish between the right group including each location and a wrong one. In conclusion, the result of this study's method was closer to real AADT value than that of the former method. and this study significantly contributes to improve the method of AADT estimation.