• Journal of the Korean Wood Science and Technology
• /
• v.17 no.2
• /
• pp.1-12
• /
• 1989

To study the structure of opposite wood in the angiosperms. samples were cut from stems and branchs of 10 spcies growing in Korea. The opposite side was defined as being along a line passing from the most wide annual ring of the tension wood on the upper side to the pith and extrapolated through the opposite side. lateral sides being on the right and left of this line. The stem woods growing almost horizontally were surveyed the structural features of the well-developed opposite wood for the tension wood. In the annual-ring of the well-developed opposite woods. an investigation was made on how the dimension of elements, microfibril angles. and cell wall layers change from tension side to opposite side. The structural characteristics of opposite wood in hardwoods realized in this study are as follows: 1. The vessel diameters increased continuously to ward the opposite side in which the values were maximum. The vessel length also increased toward opposite side. but the rates of increase were smaller than those in the vessel diameters. 2. The wood fiber length were decreased from tension toward opposite side. but the rates of decrement were f1actuated within the sampled species. 3. The microfibril angles had the minimum values on the tension side. then increased steeply toward the opposite side in which the values maximum. 4. In the percentage of elements the vessel elements increased continously at a relative rate from the tension to opposite side, whereas the values of the wood fibers were lower in the opposite than the tension side, but the' variation patterns of rays were not seem distinctly. 5. The component layers of the wood fiber in the opposite woods were very similar to the lateral woods.

• Journal of Korean Physical Therapy Science
• /
• v.16 no.4
• /
• pp.59-65
• /
• 2009

Background: Human body is formed of symmetric bilateral structures that are comprised of eye, upper arm, lower arm and etc. but, we are used only dominant components. The purpose of this study was to analysis length cognition ability in dominant eye & hand. Method: Total 180 persons (male 32, female 138) were participated in this study. They were tested with 'hole in the card' test for identification of dominant eye's side and the question for identification of dominant hand's side, then the length cognition ability was measured in right & left axillary level by describing 10cm line. Results: The results by independent t-test were as follows. In difference of length cognition ability in right axillary level between right dominant eyed group & left dominant eyed group, right dominant eyed group was superior to left dominant eyed group, but significant difference was not existed statistically(p>.05). In left axillary level, right dominant eyed group was superior to left dominant eyed group, but significant difference was not existed statistically(p>.05). In axillary level of dominant eye's side, non-crossed group was superior to crossed group, but significant difference was not existed statistically(p>.05). In axillary level of non-dominant eye's side, non-crossed group was superior to crossed group, but significant difference was not existed statistically(p>.05). Conclusion: These result can be applied to the learning of palpation & observation skill in physical therapy.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.4
• /
• pp.1-14
• /
• 2015

This study mainly analyzes that designing patterns of an adult women Jeogori that takes advantage of patterns from each textbooks and complements the disadvantages based on the analysis of data from the dress evaluation and comparison of materials. The modification of a size specification is needed for the standard body as an adjust of the length of Jogori between front and back, mediation for bust width between front and back, a movement for the based line of Sup and Godae. As a result, the suitable pattern according to the standard somatotype is as below. Jeogori Length of front is determined by the length of back which was measured from side neck point to bust point plus three centimeters, and give three and half centimeters more in front. This three and half centimeters is for the curved in front of your body due to the chest. Bust width of front and back have to show the differences of human body. Bust width of front is calculated as bust girth into quarters and add two centimeters. Bust width of back gives one centimeter behind the curve from the center line in order to reduce the floating phenomenon. So, the amount of center back line dart is one centimeter. Arm hole girth measures as dividing bust girth into four. Also, Goedae width has two methods to measure. First, divide bust girth into ten equal parts and subtract 0.5 centimeters from it. Second, measure neck girth and divide it by four. Sleeve length is equal to Hwajang minus bust width of front. Hand wrist calculates in using bust girth. Make bust girth into quarters and multiply three fifths. Side line measures as deducting from Jeogori length of back to Arm hole girth and multiply two thirds.

• Journal of the Korean Home Economics Association
• /
• v.24 no.3
• /
• pp.51-58
• /
• 1986

This study is to investigate the Function of sleeve for the construction of cuffs. Three measuremental items of sleeve cap high, length of sleeve and puff quantity of upper sleeve cap are compared between when the experimental man raises righthand static pose. The wearing test is done in sewing cuffs of either fixing up cuffs or not-fixing up cuffs, and in no cuffs. Three measuremental items are pulled length from sleeve end, pulled length from side waist line, and pulled dimensions from waist line. 1. The result according to the length and dimensions variation caused by a change of sleeve cap high. 2. The results according to the length and dimensions variation caused by a sort of sleeve length. 3. The results according to the length and dimension variation caused by the puff quantity of sleeve cap.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.7
• /
• pp.675-682
• /
• 2011

This paper presents two ground plane effects due to the size of two rectangular apertures for two-wire transmission line with equal line length crossing the changeable rectangular apertures in infinite ground planes. The CST MWS is used to determine the characteristics of the insertion loss of the transmission line from the load section in accordance with the ground plane aperture size. The results show that the insertion gain and the insertion loss are periodically observed for the multiple frequency of the half wavelength resonance by the wire length when the transmission line is nearby to horizontal side or vertical side of the aperture. The measurements of the insertion loss are performed to verify the theoretical analysis.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.185-188
• /
• 1998

A three-waveguide coupler consisted of a central guide and two side guides is theoretically explored by using modal transmission-line theory. The numerical results reveal that the coupling length Lc is different from that calculated by coupled-mode theory and the difference increases gradually as the guiding modes increase.

• Journal of architectural history
• /
• v.26 no.4
• /
• pp.35-44
• /
• 2017

The purpose of this study is to classify three-Kan hipped and gable-roofed Buddhist temples with the construction of their eave curve of part chunyeo and examine the characteristics and causes. The conclusions have been drawn as follows: First, there are largely three ways to secure symmetry in eave curve of part chunyeo. One is to obtain symmetry in eave curve of part chunyeo by making the size of eaves curves on well sides the same and forming symmetric curves in the front section along with the side roof and then forming the straight line in the central part (hereinafter referred to as the long straight line section method). The second is a method to enlarge eaves curves in the front and form eaves curves on the roof section to be symmetric (hereinafter referred to as the front is larger than side eaves curves method). The third is the method to make eaves curves in the roof section to be symmetric by adjusting the roof length and making difference between the front and side roof's length minimum (hereinafter referred to as the roof length-controlling method). Second, there are 16 cases applying two or more methods, and they are the mainstream. Third, there are 12 cases applying the front is larger than side eaves curve method and roof length-controlling method both, which seems to be the most universal. To sum up, they secured symmetry in roof edges considering the construction of seonjayeon and pyeongyeon according to the size of the structure, recognition on the directions of entrance into the area of the building, forms of planes, harmony with structures around, recognition on roof curves in accordance with the size, and also structural faults in the chunyeo part.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.18 no.1
• /
• pp.169-181
• /
• 2016

This study analyzed the characteristics and patterns of men's drawers panties to get basic data for their design. For this, drawers panties in 7 different brands (4: domestic brands, 3: imported brands) in terms of a front-center shape were collected, and the shape of men's drawers panties, characteristics of the materials, dimensions & type of patterns by the part and front-center patterns were analyzed. The study results found the followings: First, in terms of the shape of men's drawers panties, the front-center part were designed to rest the penis and scrotum in a natural and comfortable manner without a pee slit. They were seamless on the sides except for one product with side seams. Second, the drawer panties were made of elastic polyurethane materials. Specifically, domestic brand items used warm, elastic and durable nylon, polyester and rayon and polyurethanes while imported brands were mostly made of absorbent and sanitary polyurethanes. Third, regarding a size of drawer panties by part, imported brands were large in waist circumference. In terms of waist breadth at the front center, there was difference depending on an oval type. In addition, the front length at the front center differed by product, revealing difference in three-dimensional effect at the front center. The side length also differed greatly by product, which means that there might be a great difference in wear comfort. Fourth, in terms of the patterns of men's drawers panties, there was difference in side seams, center back seam and front-center patterns. Among a total of 7 products, only one product had side seams, and center back seams were found in two products only. Fifth, in terms of front-center patterns, the drawer panties can be divided into three types, creating three-dimensional effect not to give any pressure on the crotch: i) the cutting line only at the bottom of the front center part where the penis is rested, ii) puff created at the front center by adding a transverse line to the center line, iii) cutting transverse line to separate the penis from the testicles.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.15 no.4 s.40
• /
• pp.341-349
• /
• 1991

This study was done to provide basic data for clothing design and thus to contribute to the academic development of the clothing and textile area. The focus of this study was to charac­terize the somatotype based on each individual's lateral view. For this purpose, firstly, categorization of the subjects based on their lateral view and definition of each category, secondly, characterization of each somatotype, and thirdly, sugges­tion of the deterministic criteria of each category were complished. The subjects in this study were female college students of 18 to 26 year-old whose somatotypes were comparatively invariable after cessation of physical growth. The metrical items characterizing upper body lateral view were chosen. Data were collected through Anthropometry and Photometry and analyzed by Factor analysis. The results were as follows; 1. Each subject's side view contour was classified as straight type, lean-back type, bend­forward type, and swayback according to its position to the relative plumb line. Straight type was defined as the type in which the plumb line passes through the lobe of the ear, the shoulder joint, and the mid abdominal region laterally. Lean-back type positioned the plumb line more posteriorly than straight type. Bend-forward type positioned the plumb line more anteriorly than straight type. Swayback positioned the plumb line at about the same line as straight type. And curvature of side view contur was more prominent in this type than in straight type. 2. Seven factors were figured out. The first factor was representing upperbody volume, and the second factor was representing size, the third factor was horizontal distance from lateral view representing size view contour. The fourth factor was front body length, the fifth factor was back body length. The sixth factor was shoulder length and shoulder width representing shoulder shape. The seventh factor was the bust shape.

• Journal of Fashion Business
• /
• v.12 no.4
• /
• pp.143-157
• /
• 2008

The purpose of this study was to evaluate the visual effects and images according to changes in the silhouettes and length of miniskirt. The silhouettes of the miniskirt were classified into two different categories according to side line, H-line and A-line. We altered the length of the miniskirt in five categories with changes in 25cm, 27.5cm, 30cm, 32.5cm, and 35cm. For the visual evaluation, 10 stimuli were placed in mannequins, and were estimated by the experts in the fashion design. For the visual evaluation according to changes in the silhouettes and length of the miniskirt, we used 13 pairs of items to find the visual effects, and 23 pairs of adjectives to measure the visual images. The stimuli and adjectives were randomly given to the evaluators and were evaluated by the 7-Point Likert Type Scale. The data have analyzed by frequency, t-test, factor analysis, anova, scheffe's test and the MCA method. According to the factor analysis of the visual effects of the miniskirt, the result was classified into 3 factors: the thickness of the lower body, the length of the lower body, and the shape of the lower body. According to factor analysis of the visual image of the miniskirt, the result was classified into 4 factor: personality, attraction, elegance, and activity. The silhouettes of miniskirt had more positive visual effects and images in A-Line than in H-Line. Among the visual effects of miniskirts, the length affected the thickness and length of the lower body more than the silhouette did and, the silhouette had more effects on the shape of the lower body than the length did. And shorter the skirts, stronger the image of personality. However, 32.5cm and 35cm miniskirts are estimated to be more attractive than excessively short skirts. There are many differences in the image of personality and activity according to the changes in the length of miniskirts.