• 한국응용과학기술학회지
• /
• 제30권2호
• /
• pp.258-263
• /
• 2013

Carbazole, EDOT 와 benzobisthiazole이 포함되어진 새로운 전도성 고분자의 합성 및 특징을 유기 분광학적인 방법으로 규명하였다. 포텐티오메트릭 이온 선택성 막 전극들은 넒은 감응범위($10^4{\sim}10^7$)와, 시료의 혼탁도에 영향을 주지 않으며, 빠른 감응 시간과 소형화가 쉬운 이유로 병원, 환경과 산업 현장에서 널리 이용되고 있다. 이 전극의 막에는 강한 흡착과 열적인 안정성에서 뛰어난 상온에서 경화시킨 (RTV)-타입 실리콘 고무가 사용되었다. 불행하게도, 이 실리콘 고무 기반의 전극의 높은 막 저항(PVC 기반의 것과 비교하여 $10^2{\sim}10^3$배 더 높은 수치)이 응용에 제한이 되어 왔다. 여기에서 우리는 실리콘 고무 막에 전도성 고분자를 첨가 하여 막 저항이 줄어든 새로운 고체 전극을 구현하였다.

• 대한치과보철학회지
• /
• 제31권2호
• /
• pp.219-235
• /
• 1993

To determine the compatibilities of soft liming materials with denture cleansers by measuring the flexibility and elasticity and investigating the surface changes, 4 self-curing acrylic resin soft lining materials and 1 heat-curing silicone soft lining material were evaluated. 3mm thick x 20mm diameter discs of soft lining materials were individually bonded to a hard acrylic resin base as per manufacturers’instructions. Using an Instron universal testing machine, a static stress of $2kg/cm^2$ was applied for 30secs., the strain in compression was measured, giving an indication of the material’s flexibility. Elastic recovery was measured at 10secs. After removal of stress. Surface changes were investigated with Stereomicroscope. Then the specimens were immersed in 4alkaline peroxide denture cleansers and water as control group, tests were carried out at 1 day, 2 days, 7 days, 14 days and 30 days. The results were as follows : 1. Alkaline peroxide denture cleansers caused considerable porosity on the surface of selfcuring acrylic resin soft lining materials, and the most affected by the cleansers were Viscogel, Coe-Soft, Coe-Comfort, Lynal, in that order. 2. There was significant difference in flexibility between each soft lining material except for Coe-Comfort and Visco-gel, and every soft lining material was significant difference in elasticity. Especially Molloplast-B and Lynal were less flexible and more elastic than other soft lining materials(p<0.05). 3. The denture cleansers increased the flexibility and elasticity of the soft lining materials compared with control group(p<0.05), and Denalan, Polident, Kleenite, Efferdent affected the soft lining materials in that order. 4. There was significant difference in flexibility between each denture cleanser except for Denalan and Polident(p<0.05). Though Denalan and Polident, Denalan and Kleenite did not show significant difference in elasticity, other denture cleansers showed significant difference among each other(p<0.05). 5. Clinically Coe-Comfort, Coe-Soft and Visco-gel were incompatible with alkaline peroxide denture cleansers, and Lynal would be used within only 2 weeks. But Molloplast-B was compatible with alkaline peroxide denture cleansers.

• 한국의학물리학회지:의학물리
• /
• 제28권1호
• /
• pp.1-10
• /
• 2017

The difference between three-dimensional (3D) and four-dimensional (4D) dose could be affected by factors such as tumor size and motion. To quantitatively analyze the effects of these factors, a phantom that can independently control each factor is required. The purpose of this study is to develop a deformable lung phantom with the above attributes and evaluate the characteristics. A phantom was designed to simulate diaphragm motion with amplitude in the range 1~7 cm and period up to ${\geq}2s$ of regular breathing. To simulate different tumors sizes, custom molds were created using a 3D printer and filled with liquid silicone. The accuracy of the phantom diaphragm motion was assessed by comparing measured motion with predicted motion. Because the phantom diaphragm motion is not identical to the tumor motion, the correlation between the diaphragm and tumor motions was calculated by a curve fitting method to emulate user-intended tumor motion. Tumors of different sizes were located at same position, and tumor set-up positions were evaluated. The accuracy of phantom diaphragm motion was better than 1 mm. The diaphragm-tumor correlation showed that the tumor motion in the superior-inferior direction increased with increasing diaphragm motion. The tumor motion was larger in the $10cm^3$ tumor than in the $90cm^3$ tumor. The range of difference between the tumor set-up positions was 0 to 0.45 cm. This phantom showed independently adjusting factors such as tumor size and motion to facilitate quantitative analysis of the dosimetric impact of respiratory motion according to these factors.

• 한국응용과학기술학회지
• /
• 제31권4호
• /
• pp.595-601
• /
• 2014

NATM의 미세 구조는 SEM, FT-IR, 인장특성, 그리고 [NCO]/[OH]의 mole %, 입도분석에 의해 측정하였다. 친환경적인 NATM에 관한 관심이 고조됨에 따라 스테인레스 등의 금속코팅에 더욱더 중요한 무용제 도료의 발전을 이끈다. 우리는 스테인레스 스틸의 부식을 방지할 수 있는 NATM(New Austria Tunnel Method)의 수지를 합성하였다. 폴리우레탄과 에폭시로 합성한 혼성 수지는 일반적 NATM 수지와 도료와 비교하여 강도와 내구력이 매우 양호하다. 혼성수지는 폴리올, 에폭시, MDI, 실리콘 계면활성제, 촉매, 가교제, 충전제로 구성된다. 충전제인 fume silica는 경화속도를 가속시킬 뿐만 아니라 열적 장벽으로 물성이 우수함을 나타냈다. NATM 수지의 기계적 특성은 [NCO]/[OH]의 mole%와 fume silica가 증가함에 따라 강도가 증가하였다. 결론적으로 가교제와 fume silica가 함유된 혼성수지의 미세구조는 스테인레스 스틸같은 금속물질의 열경화코팅을 위한 좋은 물질이다.

• 대한치과보철학회지
• /
• 제35권2호
• /
• pp.277-295
• /
• 1997

After clinical adjustment of dental casting restoration, re-polishing procedure is recommanded because the smooth gold sureface is lost. But there is the possibility to get more loose contact than that intended by loss of gold alloy according to the kinds of polishing materials and polishing time. Therefore in this study I polished type II gold alloy with 390gm force, 20,000rpm speed, and 8 kinds of gold alloy polishing materials, fabricated by 4 companies and then measured the amount of loss of gold alloy with Surfcorder SEF-30D and observed alloy surfaces polished by 3 brown rubber points with SEM. The amount of loss of gold alloys polished with 8 kinds of polishing materials and the degree of smoothness of gold alloys according to polishing time and polishing materials were compared. The following results were obtained : 1. When the amount of loss of gold alloys polished with 3 kinds of brown rubber point was compared, Alphalex brown point had the most amount of alloy loss, followed in decreasing order by Shofu brown point and Eveflex brown point. There was statistically significant difference in the amount of alloy loss according to polishing materials. 2. When the amount of loss of gold alloys polished with 5 kinds of green rubber point was compared, Shofu green point had the most amount of alloy loss, followed in decreasing order by Alphaflex green point, Dedeco green clasp polisher, and Eveflex green point. There was statistically significant difference in the amount of alloy loss according to polishing materials except Alphaflex green point and Dedeco green clasp polisher. 3. When the amount of loss of gold alloys polished with all kinds of rubber point was compared, there was no significant difference in Eveflex brown point, Alphaflex green point, and Dedeco green clasp polisher. 4. When average amount of alloy loss per 1 revolution by polishing materials was compared, Alphalex brown point had the greatest value as $0.329{\mu}m$ and Shofu supergreen point had the lowest value as $0.022{\mu}m$. 5. When the degree of sureface smoothness of gold alloy polished with 3 kinds of brown rubber point was compared, In Alphalex brown point surface roughness was completely lost after 20 seconds polishing time, in Shofu brown point 30 seconds, in Eveflex brown point 40 seconds. But in every gold alloys fine scratch formed by rubber points was observed. Based on the results of this study, as rubber polishing materials used in polishing of dental casting restoration after clinical adjustment influenced on the tightness of occlusal or proximal contact, we should make dental casting restoration with minimum error through careful laboratory procedure and form very smooth surface of restoration with tripoli and rouge after use of silicone polishing materials.

• Archives of Plastic Surgery
• /
• 제37권1호
• /
• pp.37-45
• /
• 2010

Purpose: In Korean rhinoplasty, alloplasts such as silicone rubber have been used for dorsal and tip augmentations. However, alloplasts have produced complications such as deviation, exposure, and infection. Although autogenous tissue is an ideal material, the amount of the cartilage in Korean is not sufficient. Therefore, the authors developed a method to harvest the maximum amount of the septal and conchal cartilage. The authors first performed a complete septal extension graft for short and retruded columella and then performed nasal augmentation using various autogenous tissues. Methods: These surgical techniques were performed on 11 patients. Their average age was 27 years. An open approach with a V-shaped columellar labial incision was performed. At first, the complete septal extension graft was fixed on the entire caudal margin of the septum, and the alar cartilage was suspended to the septal extension graft to make the tip projected and the columella advanced caudally. A temporal fascial ball was used for radix augmentation. For dorsal augmentation, a batten-shaped septal cartilage graft wrapped with or without the temporal fascia or a diced cartilage graft wrapped with the temporal fascia was performed. For nasal tip augmentation, a shield graft and a cap graft or a folded conchal cartilage graft was performed.Results: The mean follow-up period was 11.2 months. The overall results were natural and satisfactory. Two patients underwent slight absorption and caudal displacement. With the exception of these cases, no complications were observed. Conclusion: Korean rhinoplastic surgeons are accustomed to using the alloplasts despite of serious complications. When rhinoplasty using autogenous tissue was performed, some complications occurred such as the displacement of the diced cartilage graft wrapped with the fascia, but many of the complications of alloplastic rhinoplasty were avoided. Therefore, we propose that by this time Korean rhinoplastic surgeons need to change their preference from alloplastic rhinoplasty to autogenous rhinoplasty.

• Archives of Plastic Surgery
• /
• 제36권4호
• /
• pp.437-444
• /
• 2009

Purpose: Transgender is a disorder of gender identity, who have appropriate chromosomal, hormonal and anatomical characteristics corresponding to their sexual phenotype but feel strongly with respect to their sexual identity, that they belong to the opposite sex. There is a persistence discomfort and sense of inappropriateness about one's assigned sex in a person who has reached puberty. Transgender is a psychiatric problem, but surgical method provides more satisfactory adjustment for patients. In gender reassignment surgery for female to male transgender, mastectomy, nipple reduction, hysterectomy, oophorectomy and phalloplasty are included. And as the final operation, recommended for scrotoplasty and artificial testes insertion. So we investigated the necessity and method of scrotoplasty in the final operation of female to male transgender. Method: The authors have long term follow-up of 75 cases female to male transgender during January, 1991 to February, 2008. Among them, 13 cases were evaluated in this study. During phalloplasty, the labium major skin preserved. And this labium majoral skin flap was made for the neoscrotum. At least six months later, artificial testes were inserted in neoscrotum with local anesthesia. Middle sized (3 cm diameter) artificial testes(silicon gel or carving soft silicone implant) were used because of the limitation of the neoscrotum. We evaluated the questionnaire and interview about the postoperative satisfaction in configuration of reconstructed scrotum, and the necessity of operation, the postoperative psychosocioeconomic improvement and limitation of body exposure activities such as swimming, public bathing. Results: Based on this study, satisfaction of reconstructed scrotum after scrotoplasty was improved(92%). The necessity of scrotoplasty was in 92.3% and the postoperative psychosocioeconomic well - being improvement was 77% in answers. Less limitation of activities requiring body exposure was 54% in answers. Most of the patients were satisfied with the results of surgical operation inspite of the operative procedure had some postoperative complications. Conclusion: This study was reported that the scrotoplasty in female to male transgender is not only a conversion of external genitalia but also an improvement of psychosocial state. Most patients sincerely hope to this operation, so we improve our surgical method for more good results.

• 한국방사선학회논문지
• /
• 제14권2호
• /
• pp.149-155
• /
• 2020

방사선 방호복의 대부분은 가공성과 경제성이 매우 우수하고 높은 원자번호를 갖고 있어 방사선 차폐가 우수한 납으로 제작된다. 하지만 납은 유해 중금속으로 분류되어 납중독 등의 위험이 있으며, 착용 시 중량감 및 불편함 등이 크므로 최근에는 납이 아닌 다양한 물질로 차폐 시트에 대한 연구가 이루어지고 있다. 본 연구에서는 인체에 무해한 BaSO₄와 Bi₂O₃두 화합물과 실리콘 재질의 바인더를 혼합하여 기존과 동등한 방사선 차폐능력을 유지하면서도 물리적 특성이 개선된 다층 구조의 차폐 시트에 대한 연구를 수행하였다. 연구 결과 기존의 차폐 시트와 비교하여 본 연구에서 제작된 다층 구조의 방사선 차폐 시트는 동일한 두께를 기준으로 약 9.8 % 우수한 특성을 보였으며 물리적 특성 중 인장 강도는 BaSO₄/nylon/Bi₂O₃ 차폐 시트에서 12.27 N/㎟로 가장 우수한 것으로 분석되었다.

• Archives of Plastic Surgery
• /
• 제40권5호
• /
• pp.610-615
• /
• 2013

Background Cephalometric analysis is essential for planning treatment in maxillofacial and aesthetic facial surgery. Although photometric analysis of the Korean nose has been attempted in the past, anthropometry of the deeper nasal structures in the same population based on computerized tomography (CT) has not been published. We therefore measured three anthropometric parameters of the nose on CT scans in our clinical series of patients. Methods We conducted the current retrospective study of a total of 100 patients (n=100) who underwent a CT-guided radiological measurement at our institution during a period ranging from January of 2008 to August of 2010. In these patients, we took three anthropometric measurements: the nasofrontal angle, the pyramidal angle, and the linear distance between the nasion and the tip of the nasal bone. Results The mean nasofrontal angle was $131.14^{\circ}$ in the male patients and $140.70^{\circ}$ in the female patients. The mean linear distance between the nasion and the tip of the nasal bone was 21.28 mm and 18.02 mm, respectively. The mean nasal pyramidal angle was $112.89^{\circ}$ and $103.25^{\circ}$ at the level of the nasal root, $117.49^{\circ}$ and $115.60^{\circ}$ at the middle level of the nasal bone, and $127.99^{\circ}$ and $125.04^{\circ}$ at the level of the tip of the nasal bone, respectively. Conclusions In conclusion, our data will be helpful in the preparation of silicone implants for augmentation and/or corrective rhinoplasty in ethnic Korean people.

• 한국재료학회지
• /
• 제14권12호
• /
• pp.893-899
• /
• 2004

Even though Ti-6Al-4V has gained popularity as an implant material, the possible dissolution of Al and V ions in body fluids remains a matter of concern. Though commercially pure Ti (Cp-Ti) overcomes this problem, the mechanical strength of pure titanium remains very low. Thus, in this experiment Cp-Ti was processed by Equal channel angular processing (ECAP), in order to increase the mechanical strength. The biocompatibility of ECAP-Ti, Cp-Ti and Ti-6Al-4V was examined by the apatite formation on each sample surface, after treating the surface with 5M NaOH and soaking in Simulated body fluids (SBF). Initially, the samples were mechanically polished on silicone carbide paper (#2000). The polished samples were treated with 5M NaOH solution at $60^{\circ}C$ for 24 hours. The NaOH treated samples were washed gently with distill water and dried at $40^{\circ}C$ for 1 day. The dried samples were heat treated in air at $600^{\circ}C$ for 1 hour. The surface morphology of these samples were studied using SEM and XRD. The SEM studies showed network of pores in all samples. The XRD showed oxide layer formation on Cp-Ti and Ti-6Al-4V. samples. However the oxide layer in ECAP-Ti was not substantial. These samples were immersed in SBF, kept at $36.5^{\circ}C$ for seven days period. At the end of 7 days, the apatite formation was confirmed only on Cp-Ti and was not observed in Ti-6Al-4V and ECAP-Ti. These observations of apatite formation relate to the fact that Cp-Ti showed greater oxide layer than other samples. The apatite examined was confirmed as tricalcium phosphate (TCP) using EDS and XRD.